TCP-2-33 MINI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
FREQ. RANGE (MHz) ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) 1000-3000 18 15 0.8 1.9 5.0 0.9 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ABCDEF G H J K wt .028 .065 .190 .030 grams TCP-2-33+
2 Way-0° 50Ω 1000 to 3000 MHz
Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) 0.5W max. Outline Drawing Outline Dimensions ( )inch mm REV. D M151107 TCP-2-33+ ED-13156 DY/CP/AM 151008 CASE STYLE: DB714Features
- low insertion, 0.8 dB typ.
- excellent amplitude unbalance, 0.3 dB typ.
- very good phase unbalance, 1.0 deg. typ.
- external resistor required
- aqueous washable
- leads for excellent solderability
- low cost
Applications
- cellular
- PCN
- GPS Pin Connections SUM PORT 2,5,6 PORT 1 3 PORT 2 4 GROUND 1 EXT. RESISTOR 200Ω 3,4 Demo Board MCL P/N: TB-464+ Suggested PCB Layout (PL-357) Frequency (MHz) Total Loss1 (dB) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR VSWR S-1 S-2 Permanent damage may occur if any of these limits are exceeded. 1. Total Loss = Insertion Loss + 3dB splitter loss. Lead #1 identifier shall be located in the cross-hatched area shown. Identifier may be either a molded or marked feature. Suggested Layout, Tolerance to be within ±.002 PCB Land Pattern electrical schematic TOTAL LOSS 3.0 3.5 4.0 4.5 5.0 1000 1500 2000 2500 3000 FREQUENCY (MHz) TOTAL LOSS (dB) S-1(dB) S-2(dB) ISOLATION 1000 1500 2000 2500 3000 FREQUENCY (MHz) ISOLATION (dB) VSWR 1.0 1.2 1.4 1.6 1.8 2.0 2.2 1000 1500 2000 2500 3000 FREQUENCY (MHz) VSWR #S-VSWR #1-VSWR #2-VSWR Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200, 500 13” 1000, 2000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications