TCP-2-25 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

FREQ. RANGE (MHz) ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) 200-2500 18 10 0.8 1.3 6.0 0.8 Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ABCDEF G H J K wt .028 .065 .190 .030 grams TCP-2-25+

2 Way-0° 50Ω 200 to 2500 MHz

Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) 0.5W max. Outline Drawing Outline Dimensions ( )inch mm electrical schematic REV. H M151107 TCP-2-25+ ED-8545 DY/TD/CP/AM 120110 CASE STYLE: DB714Features

  • low insertion, 0.8 dB typ.
  • excellent amplitude unbalance, 0.2 dB typ.
  • very good phase unbalance, 1.2 deg. typ.
  • external resistor required
  • aqueous washable
  • leads for excellent solderability
  • low cost

Applications

  • cellular
  • PCN
  • GPS Pin Connections SUM PORT 2,5,6 PORT 1 3 PORT 2 4 GROUND 1 EXT. RESISTOR 475Ω 3,4 Demo Board MCL P/N: TB-86 Suggested PCB Layout (PL-008) TOTAL LOSS 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 0 500 1000 1500 2000 2500 FREQUENCY (MHz) TOTAL LOSS (dB) S-1 S-2 ISOLATION 0 500 1000 1500 2000 2500 FREQUENCY (MHz) ISOLATION (dB) VSWR 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 0 500 1000 1500 2000 2500 FREQUENCY (MHz) VSWR #S-VSWR #1-VSWR #2-VSWR Frequency (MHz) Total Loss1 (dB) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR VSWR S-1 S-2 Permanent damage may occur if any of these limits are exceeded. 1. Total Loss = Insertion Loss + 3dB splitter loss. Lead #1 identifier shall be located in the cross-hatched area shown. Identifier may be either a molded or marked feature. Suggested Layout, Tolerance to be within ±.002 PCB Land Pattern Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200, 500 13” 1000, 2000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications