TCP-2-10 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

L = low range [fL to 10 fL] M = mid range [10 fL to fU/2] U= upper range [fU/2 to fU] FREQ. RANGE (MHz) ISOLATION (dB) INSERTION LOSS (dB) ABOVE 3.0 dB PHASE UNBALANCE (Degrees) AMPLITUDE UNBALANCE (dB) fL-fU L M U L M U L M U L M U Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits TCP-2-10+

2 Way-0° 50Ω 5 to 1000 MHz

Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) 0.5W max. REV. H M151107 TCP-2-10+ ED-8261/1 DY/TD/CP/AM 151008 CASE STYLE: DB714Features

  • low insertion, 0.5 dB typ.
  • excellent amplitude unbalance, 0.1 dB typ.
  • very good phase unbalance, 1.0 deg. typ.
  • external resistor & capacitor required
  • aqueous washable
  • leads for excellent solderability
  • low cost

Applications

  • cellular
  • VHF/UHF
  • communications systems Pin Connections SUMPORT 6 PORT 1 3 PORT 2 4 GROUND 1 CONNECT 2,5 EXT. RESISTOR 100Ω 3,4 EXT. CAPACITOR 1.5pF 2 TO GND

5 TO GND

Demo Board MCL P/N: TB-232 Suggested PCB Layout (PL-001) Frequency (MHz) Total Loss1 (dB) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR VSWR S-1 S-2 Permanent damage may occur if any of these limits are exceeded. 1. Total Loss = Insertion Loss + 3dB splitter loss.ABCDEF G H J K wt .028 .065 .190 .030 grams Outline Drawing Outline Dimensions ( ) inch mm Lead #1 identifier shall be located in the cross-hatched area shown. Identifier may be either a molded or marked feature. Suggested Layout, Tolerance to be within ±.002 PCB Land Pattern TOTAL LOSS 3.0 3.2 3.4 3.6 3.8 4.0 0 200 400 600 800 1000 FREQUENCY (MHz) TOTAL LOSS (dB) S-1(dB) S-2(dB) ISOLATION 0 200 400 600 800 1000 FREQUENCY (MHz) ISOLATION (dB) VSWR 1.00 1.05 1.10 1.15 1.20 1.25 0 200 400 600 800 1000 FREQUENCY (MHz) VSWR #S-VSWR #1-VSWR #2-VSWR electrical schematic Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200, 500 13” 1000, 2000 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications