TCN

TCN AVX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

L Case Size See table above 157 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) M Tolerance M = ±20% 006 Rated DC Voltage 006 = 6.3Vdc 016 = 16Vdc 020 = 20Vdc 025 = 25Vdc 035 = 35Vdc HOW TO ORDER R Packaging R = Pure Tin 7" Reel S = Pure Tin 13" Reel 0200 ESR in mΩ E Additional Character E = Black resin

FEATURES

• Highest CV/cc in broad range of low profiles
• Conductive polymer electrode
• Benign failure mode under recommended use conditions
• Lower ESR
• Undertab terminations layout: - High Volumetric Efficiency - High PCB assembly density - High capacitance in smaller dimensions
• 3x reflow 260°C compatible
• 10 case sizes available

APPLICATIONS

• Consumer applications (e.g. mobiles, MP3 etc.)
• Bulk decoupling of SoC (System on chip) LEAD-FREE COMPATIBLE COMPONENT TCN Series Highest CV/cc Conductive Polymer Chip Capacitors Undertab H, K, L, O, S, T, X CASE XXXXX 156 J AVX LOGO Polymer Capacitance Value in pF 156 = 15µF Rated Voltage J = 6.3V ID Code Polarity Band (Anode+) M, N CASE AVX LOGO Polymer J 1 0 6 Capacitance Value in pF 106 = 10µF Rated Voltage Code J = 6.3V Polarity Band (Anode+) MARKING

4 CASE

Polymer Capacitance Value in pF 158 = 1500µF Rated Voltage J = 6.3V ID Code Polarity Band (Anode+) XXXXX 336 E AVX LOGO Polymer Capacitance Value in pF 336 = 33µF Rated Voltage E = 25V ID Code Polarity Band (Anode+) AVX LOGO Polymer E 475 Capacitance Value in pF 106 = 10µF Rated Voltage Code J = 6.3V Polarity Band (Anode+) XXXXX 107 V AVX LOGO Polymer Capacitance Value in pF 107 = 100µF Rated Voltage V = 35V ID Code Polarity Band (Anode+) CASE DIMENSIONS:millimeters (inches) W WP AP S H AN WN WL Polarity Band (Anode+) W WP AP S H AN WN WL Polarity Band (Anode+) Part Numbers already changed to an “E” suffix will continue to be supplied with only black resin. Those Part Numbers currently produced with gold resin will eventually change to black before July, 2020.

Capacitance Rated Voltage DC to 85°C / 0.66DC to 105°C μF Code 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V ( V) 50V (T) 1.0 105 N(1500E) 4.7 475 N(500E) L(300E) T(200E) 6.8 685 O(500E) 10 106 O(500E) O(500E) K(350E) T(200E) S(350E) 15 156 O(500E) O(500E) 22 226 O(500E) O(500E) T(200E) 33 336 L(200E) T(250E) T(200E) L(250E) 47 476 M(500E) T(200) X(100E) X(150E) T(150E) 68 686 L(200E) 150 157 S(250E) X(100E) 4(70E) T(200E) 220 227 H(170E) 4(70E) 4(100E) 4(100E) T(200E) 330 337 4(70E) 4(100E) 470 477 X(50E) 4(100E) 1000 108 X(200E)/3(100)* 4(55E) 1500 158 4(55E) CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) TCN Series Highest CV/cc Conductive Polymer Chip Capacitors Undertab NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and incre ases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below max- imum temperature within humidity controlled environments. Careful attention should be paid to maximum temperature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more informat ion or contact factory for application assistance. Technical Data: All technical data relate to an ambient temperature of +2 5°C Capacitance Range: 1.0 μF to 1500 μF Capacitance Tolerance: ±20% Leakage Current DCL: 0.1CV Rated Voltage (VR) /H11349+85ºC: 4 6.3 10 16 20 25 35 50 Category Voltage (VC) /H11349+105ºC: 3.2 5 8 13 16 20 28 40 Surge Voltage (VS) /H11349+85ºC: 5.2 8 13 21 26 33 46 65 Surge Voltage (VS) /H11349+105ºC: 4 6 10 16 20 25 35 50 Temperature Range: -55°C to +105°C Reliability: 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance 60% confidence level TECHNICAL SPECIFICATIONS Note for designers - for the highlighted ratings, higher voltage options are now available in the same case size and are recomm ended for new designs. Released ratings, (ESR ratings in mOhms in parentheses) *Codes under developement - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards.

Highest CV/cc Conductive Polymer Chip Capacitors Undertab RATINGS & PART NUMBER REFERENCE Rated Maximum DCL DF ESR 100kHz RMS Current (mA) AVX Case Cap Voltage Operating Max. Max. Max. Product MSL Part No. Size (μF) (V) Temperature (μA) (%) @ 100kHz 45ºC 85ºC 105ºC Category (ºC) (mΩ)

4 Volt @ 85°C

TCNO226M004#0500E O 22 4 105 8.8 10 500 400 300 200 3 3

6.3 Volt @ 85°C

TCNO156M006#0500E O 15 6.3 105 9 10 500 400 300 200 3 3 TCNO226M006#0500E O 22 6.3 105 13.2 10 500 400 300 200 3 3 TCNM476M006#0500E M 47 6.3 105 28.2 10 500 400 300 200 3 3 TCNK107M006#0200E K 100 6.3 105 60 10 200 700 500 300 3 5 TCNK107M006#0250E K 100 6.3 105 60 10 250 600 400 300 3 5 TCNL107M006#0200E L 100 6.3 105 60 10 200 700 500 300 3 5 TCNS107M006#0250E S 100 6.3 105 60 10 250 600 400 300 3 3 TCNL157M006#0200E L 150 6.3 105 90 10 200 700 500 300 3 5 TCNS157M006#0250E S 150 6.3 85 90 10 250 600 400 – 5 3 TCNT157M006#0200E T 150 6.3 105 90 10 200 700 500 300 3 4 TCNH227M006#0170E H 220 6.3 105 132 10 170 800 600 400 3 4 TCNT227M006#0200E T 220 6.3 85 132 10 200 700 500 – 5 4 TCNX477M006#0050E X 470 6.3 85 282 10 50 1900 1300 – 5 5 TCNX108M006#0200E X 1000 6.3 85 600 30 200 900 600 – 5 5 TCN3108M006#0100 3 1000 6.3 105 600 20 100 1200 840 480 3 5 TCN4108M006#0055E 4 1000 6.3 85 600 20 55 1860 1302 – 5 4 TCN4158M006#0055E 4 1500 6.3 85 900 20 55 1860 1302 – 5 4

10 Volt @ 85°C

TCNO106M010#0500E O 10 10 105 10 10 500 400 300 200 3 3 TCNO156M010#0500E O 15 10 105 15 10 500 400 300 200 3 3

16 Volt @ 85°C

TCNO685M016#0500E O 6.8 16 105 10.9 10 500 400 300 200 3 3 TCNO106M016#0500E O 10 16 105 16 10 500 400 300 200 3 3 TCNL336M016#0200E L 33 16 85 52.8 6 200 700 500 – 5 5 TCNT336M016#0200E T 33 16 105 52.8 6 200 700 500 300 3 4 TCNL476M016#0250E L 47 16 85 75.2 6 250 600 400 – 5 5 TCNT476M016#0150E T 47 16 105 75.2 6 150 800 600 400 3 4 TCNT476M016#0200 T 47 16 105 75.2 6 200 700 500 300 3 4 TCNX157M016#0100E X 150 16 105 240 6 100 1300 900 600 3 4 TCN4227M016#0070E 4 220 16 105 352 20 70 1650 1155 660 2 4 TCN4337M016#0070E 4 330 16 105 528 20 70 1650 1155 660 3 4 TCN4477M016#0100E 4 470 16 85 752 20 100 1380 966 – 5 4

20 Volt @ 85°C

TCN4227M020#0100E 4 220 20 85 440 10 100 1380 966 – 5 4 TCN4337M020#0100E 4 330 20 85 660 20 100 1380 966 – 5 4

25 Volt @ 85°C

TCNN475M025#0500E N 4.7 25 105 11.8 10 500 400 300 200 3 3 TCNK106M025#0350E K 10 25 105 25 10 350 500 400 200 3 5 TCNS106M025#0350E S 10 25 105 25 10 350 500 400 200 3 5 TCNT226M025#0200E T 22 25 105 55 6 200 700 500 300 3 4 TCNT336M025#0250E T 33 25 105 82.5 10 250 600 400 300 3 4 TCNX476M025#0100E X 47 25 105 117.5 6 100 1300 900 600 2 5 TCN3107M025#0070 3 100 25 105 250 6 70 1440 1008 576 2 5 TCN4107M025#0100E 4 100 25 105 250 6 100 1380 966 552 2 4 TCN4157M025#0070E 4 150 25 105 375 6 70 1650 1155 660 2 4 TCN4227M025#0100E 4 220 25 105 550 10 100 1380 966 552 3 4

35 Volt @ 85°C

TCNL475M035#0300E L 4.7 35 105 16.5 6 300 600 400 300 2 5 TCNT475M035#0200E T 4.7 35 105 16.5 10 200 700 500 300 3 4 TCNT106M035#0200E T 10 35 105 35 10 200 700 500 300 3 4 TCNX476M035#0150E X 47 35 105 164.5 10 150 1100 800 500 3 4 TCN3107M035#0200 3 100 35 85 350 10 200 850 595 - 5 5 TCN4107M035#0100E 4 100 35 105 350 10 100 1380 966 552 2 3

50 Volt @ 85°C

TCNN105M050#1500E N 1 50 105 5 10 1500 200 100 100 3 3 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 274. NOTE: AVX reserves the right to supply higher voltage ratings in the same case size to the same reliability standards.

Highest CV/cc Conductive Polymer Chip Capacitors Undertab PRODUCT CATEGORY 2, 3 (TEMPERATURE RANGE -55°C TO +105°C) TEST Condition Characteristics Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL (VR ≤ 75V) 1.25 x initial limit DCL (VR > 75V) 2 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 3 x initial limit ΔC/C within +30/-20% of initial value DF 1.5 x initial limit ESR 2 x initial limit +20ºC -55ºC +20ºC +85ºC +105ºC +20ºC DCL IL* n/a IL* 10 x IL* 12.5 x IL* IL* DF IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* IL* Visual examination no visible damage DCL initial limit ΔC/C within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V DF 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit Apply rated voltage (Ur) at 85ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V (all CATEGORIES). And / or apply rated voltage (Ur) (CATEGORY 2) or 0.8x rated voltage (CATEGORY 3) at 105°C for 2000 hours through a circuit impedance of ≤0.1Ω/V. Always stabilize at room temperature for 1-2 hours before measuring. Store at 105ºC, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Apply 1.3x rated voltage (Ur) at 105ºC for CATEGORY 2, or apply 1.3x 0.8x rated voltage (Ur) at 105ºC for CATE- GORY 3 for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω Step Temperature°C Duration(min) 1 +20 15 2 -55 15 3 +20 15 4 +85 15 5 +105 15 6 +20 15 *Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. Endurance Storage Life Humidity Temperature Stability Surge Voltage MIL-STD-202, Method 213, Condition C MIL-STD-202, Method 204, Condition D Mechanical Shock Vibration 100% 95% 90% 85% 80% 75% 70% 65% 60% 55% 50% -55ºC 85ºC 105ºC Rated Voltage Product Category 2 Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥ 16V 100% 95% 90% 85% 80% 75% 70% 65% 60% 55% 50% -55ºC 85ºC Rated Voltage Product Category 5 Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥16V 100% 95% 90% 85% 80% 75% 70% 65% 60% 55% 50% -55ºC 85ºC 105ºC Product Category 3 Rated Voltage Recommended Application Voltage for Vr ≤ 10V Recommended Application Voltage for Vr ≥ 16V 80% 72% 64% RECOMMENDED DERATING FACTOR Voltage and temperature derating as percentage of Vr

Highest CV/cc Conductive Polymer Chip Capacitors Undertab PRODUCT CATEGORY 5 (TEMPERATURE RANGE -55°C TO +85°C) TEST Condition Characteristics Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 1.25 x initial limit ΔC/C within ±20% of initial value DF 1.5 x initial limit ESR 2 x initial limit Visual examination no visible damage DCL 5 x initial limit ΔC/C within +40/-20% of initial value DF 1.5 x initial limit ESR 2 x initial limit +20ºC -55ºC +20ºC +85ºC +20ºC DCL IL* n/a IL* 10 x IL* IL* DF IL* 1.5 x IL* IL* 1.5 x IL* IL* Visual examination no visible damage DCL initial limit ΔC/C within +10/-20% of initial value for Vr ≤ 10V within +20/-30% of initial value for Vr ≥ 16V DF 1.25 x initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit Visual examination no visible damage DCL initial limit ΔC/C within ±5% of initial value DF initial limit ESR initial limit Apply rated voltage (Ur) at 85ºC for 2000 hours through a circuit impedance of ≤0.1Ω/V. Stabilize at room temperature for 1-2 hours before measuring. Store at 85ºC, no voltage applied, for 2000 hours. Stabilize at room temperature for 1-2 hours before measuring. Store at 65ºC and 95% relative humidity for 500 hours, with no applied voltage. Stabilize at room temperature and humidity for 1-2 hours before measuring. Apply 1.3x rated voltage (Ur) at 85ºC for 1000 cycles of duration 6 min (30 sec charge, 5 min 30 sec discharge) through a charge / discharge resistance of 1000Ω Step Temperature°C Duration(min) 1 +20 15 2 -55 15 3 +20 15 4 +85 15 5 +20 15 *Initial Limit Initial measurement max. 1hr after the removal from dry pack or after pretreatment at 85°C for 24 hours. Endurance Storage Life Humidity Temperature Stability Surge Voltage MIL-STD-202, Method 213, Condition C MIL-STD-202, Method 204, Condition D Mechanical Shock Vibration

Highest CV/cc Conductive Polymer Chip Capacitors Undertab AVX SOLID ELECTROLYTIC CAPACITOR ROADMAP SERIES LINE UP: CONDUCTIVE POLYMER