DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
E Case Size See table above 108 Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) M Tolerance M=±20% 004 Rated DC Voltage 004=4Vdc 006=6.3Vdc 010=10Vdc 035=35Vdc HOW TO ORDER R Packaging R = Lead Free 7" Reel S = Lead Free 13" Reel Technical Data: All technical data relate to an ambient temperature of +25°C Capacitance Range: 1000 μF Capacitance Tolerance: ±20% Leakage Current DCL: 0.1CV Rated Voltage (VR) /H11349+85°C: 4 6.3 10 35 Category Voltage (VC) /H11349+105°C: 3.2 5 8 28 Surge Voltage (VS) /H11349+85°C: 5.2 8 13 46 Surge Voltage (VS) /H11349 +105°C: 4 6 10 35 Temperature Range: -55ºC to +105ºC Reliability: 1% per 1000 hours at 85°C, VR with 0.1Ω/V series impedance, 60% confidence level TECHNICAL SPECIFICATIONS TCM Series Tantalum Solid Electrolytic Chip Capacitors Conductive Polymer Multianode CASE DIMENSIONS:millimeters (inches) W1 dimension applies to the termination width for A dimensional area only. 0010 ESR in mΩ For part marking see page 130 LEAD-FREE COMPATIBLE COMPONENT
- Conductive polymer multianode
- Extremely Low ESR
- Reduced ignition failure mode
- 3x reflow 260°C compatible
- Volumetric efficiency
- High frequency capacitance retention
Tantalum Solid Electrolytic Chip Capacitors Conductive Polymer Multianode Capacitance Rated Voltage DC (V R) to 85°C μF Code 4V (G) 6.3V (J) 10V (A) 35V (V) 22 226 E(25) 33 336 47 476 68 686 100 107 150 157 220 227 330 337 E* E(10) 470 477 E* E* 680 687 1000 108 E(10,12) 1500 158 CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE (LETTER DENOTES CASE SIZE) Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development – subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply higher ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25ºC. Capacitance and DF are measured at 120Hz, 0.5RMS with DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. ESR allowed to move up to 1.25 times catalog limit post mounting. For typical weight and composition see page 123. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same rel iability standards. Voltage vs Temperature Rating 100% 80% 100% 80%80% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% -55°C 0°C 40°C 60°C 85°C 105°C Rated range Recommended derating Rated DCL DF ESR 100kHz RMS Current (mA) 100kHz RMS Voltage (mV) AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 105ºC 25ºC 85ºC 105ºC 4 Volt @ 85°C (3.2 Volt @ 105°C) TCME108M004#0010 E 1000 4 400 8 10 3 4062 3656 2640 41 37 26 TCME108M004#0012 E 1000 4 400 8 12 3 3708 3337 2410 44 40 12
6.3 Volt @ 85°C (5 Volt @ 105°C)
TCME337M006#0010 E 330 6.3 198 8 10 3 4062 3656 2640 41 37 26 TCME447M006#0010 E 470 6.3 282 8 10 3 4062 3656 2640 41 37 26
10 Volt @ 85°C (8 Volt @ 105°C)
TCME337M010#0010 E 330 10 330 8 10 3 4062 3656 2640 41 37 26
35 Volt @ 85°C (28 Volt @ 105°C)
TCME226M035#0025 E 22 35 77 8 25 3 2569 2312 1670 64 58 42