TCM0605M-650-2P-T201

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 (1/4) cmf_commercial_signal_tcm0605m_en.fm EMC Components Common mode filters High-speed differential signal line (MIPI D-PHY, USB2.0, etc.) TCM-M series TCM0605M type

FEATURES

Thin-film common mode filter based on the thin-film processing te chniques and material technology cultivated from HDD head manu- facturing. By optimizing the design, the signal transm ission speed can be broadened (cutoff freque ncy of 4.8GHz or more) while also exerti ng a large noise suppression effect. This is the compact 0605 size (0.65x0.50x0.30mm) type. Operating temperature range: –25 to +85°C APPLICATION Noise countermeasure for ultra-high-speed differential interfaces (MIPI-D PHY , USB2.0, HDMI, etc.) for mobile devices and general con- sumer products such as smart phones, tablets, digital cameras, and portable music players. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Measurement equipment ˎEquivalent measurement equipment may be used. TCM 0605 M - 900 - 2P - T 201 Series name L×W×T dimensions Product internal code Impedance () at 100MHz Number of lines Packaging style Internal code0.65×0.5×0.3 mm Common mode attenuation Common mode impedance [at 100MHz] DC resistance [1 line] Cutoff frequency Rated current Rated voltage Insulation resistance Part No. (dB) () (GHz) (A)max. (V)max. (M)min. 24.0 dB min.ˏ700M to 850MHz 12.0 dB min.ˏ1.0G to 2.0GHz 22.0 dB min.@700M to 850MHz 14.0 dB min.@1.0G to 2.0GHz Measurement item Product No. Manufacturer Common mode impedance 4291A Keysight Technologies DC resistance 4338A Keysight Technologies Insulation resistance 4339A Keysight Technologies REACH SVHC-Free Lead FreeRoHS Pb Halogen Free BrCl

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 (2/4) cmf_commercial_signal_tcm0605m_en.fm EMC Components TCM0605M type IMPEDANCE VS. FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. INSERTION LOSS VS. FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. Product No. Manufacturer 4991A Keysight Technologies Product No. Manufacturer E5071B Keysight Technologies 100 1000 10000 1 10 100 1000 10000 Impedance (Ω) Frequency (MHz)

900 Differential mode

900 Common mode

650 Common mode

650 Differential mode

Attenuation(dB) Frequency (MHz)

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 (3/4) cmf_commercial_signal_tcm0605m_en.fm EMC Components TCM0605M type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT  Operating temperature range includes self-heating.  The storage temperature range is for after the assembly. Dimensions in mm 0.65±0.05 0.50±0.05 0.30±0.05 0.15±0.05 0.45±0.05 0.20±0.05 0.15typ. 0.71 0.20.3 0.8 0.25 0.23 Dimensions in mm  No polarity Natural cooling 5s max. 60 to 120s Preheating 10 to 30s Soldering 230°C 230°C 245°C 180°C 150°C Time Peak Temperature Type A B K TCM0605M 0.63 0.77 0.35 Package quantity 10000 pcs/reel Operating temperature range Storage temperature range Individual weight –25 to +85 °C –25 to +85 °C 0.5 mg 2.0±0.5 ø13±0.2 ø21±0.8 Dimensions in mm 1.0 ø180+0 13+1.4 9+0.3 ø60 4.02.0 B A Cavity 2.0 8.0 Sprocket hole ø1.5 1.75 3.5 Dimensions in mm K 160min. Taping 200min. 300min.Drawing direction Dimensions in mm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20181101 (4/4) cmf_commercial_signal_tcm0605m_en.fm EMC Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equi p- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damag e to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipmentɹɹ (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose

applications

When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. REMINDERS