DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200712 (1/4) cmf_commercial_signal_tcm0403m_en.fm EMC Components Common mode filters High-speed differential signal line (USB2.0, LVDS, etc.) TCM-M series TCM0403M type
FEATURES
Thin-film common mode filter based on the thin-film processing techniques and material technology. Has EMC suppression by achieving wide freque ncy range (cutoff frequency of 4GHz or hi gher) differential mode transmission while ensuring deep common mode attenuation at high frequencies with virtually no affect on the high-speed differential transmission line sig- nal. Lineup includes 0403 (L0.45×W0.30×T0.23mm), the industry's smallest thin-film common mode filter. Operating temperature range: –25 to +85°C APPLICATION Noise countermeasure for high-speed differential interfaces (USB 2.0, LVDS, MIPI, etc.) for mobile devices and general consumer prod- ucts such as smart phones, tablets, digital cameras, and portable music players. Application guides: Smart phones/tablets PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Measurement equipment ˎEquivalent measurement equipment may be used. TCM 0403 - M - 900 - 2P - T 210 Series name L×W×T dimensions Product internal code Characteristic internal code Number of lines Packaging style Internal code0.45×0.3×0.23 mm Common mode attenuation DC resistance [1 line] Rated current Rated voltage Insulation resistance Part No. (dB) () (A)max. (V)max. (M)min. 23min. @700M to 850MHz 3.0±30% 0.035 5 10 TCM0403M-900-2P-T21024min. @850M to 1.0GHz 12min. @1.0G to 2.0GHz Measurement item Product No. Manufacturer Common mode attenuation N5230A Keysight Technologies DC resistance 4338A Keysight Technologies Insulation resistance 4339A Keysight Technologies REACH SVHC-Free Lead FreeRoHS Pb Halogen Free BrCl
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200712 (2/4) cmf_commercial_signal_tcm0403m_en.fm EMC Components TCM0403M type IMPEDANCE VS. FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. INSERTION LOSS VS. FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. Product No. Manufacturer E4991A Keysight Technologies Product No. Manufacturer N5230A Keysight Technologies 100 1000 10000 1 10 100 1000 10000 Impedance (Ω) Frequency (MHz) 1 10 100 1000 10000 Frequency (MHz) Insertion loss (dB) –10 –15 –40 –30 –20 –25 –35
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200712 (3/4) cmf_commercial_signal_tcm0403m_en.fm EMC Components TCM0403M type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN CIRCUIT DIAGRAM RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT The storage temperature range is for after the assembly. Dimensions in mm 0.45±0.02 0.30±0.02 0.23±0.02 0.075±0.03 0.300 Dimensions in mm 0.200.20 0.15 0.15 0.45 0.60 No polarity Natural cooling 5s max. 60 to 120s Preheating 10 to 30s Soldering 230°C 230°C 245°C 180°C 150°C Time Peak Temperature Type A B K TCM0403M 0.40 0.55 0.27 Package quantity 10,000 pcs/reel Operating temperature range Storage temperature range Individual weight –25 to +85 °C –25 to +85 °C 0.2 mg 2.0±0.5 ø13±0.2 ø21±0.8 Dimensions in mm 1.0 E ø180+0 13+1.4 9+0.3 ø60 4.0±0.12.0±0.5 B A Cavity 2.0±0.5 8.0±0.3 Sprocket hole 1.5 +0.1 –0.0 1.75±0.1 3.5±0.05 Dimensions in mm K 160min. Taping 200min. 300min.Drawing direction Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20200712 (4/4) cmf_commercial_signal_tcm0403m_en.fm EMC Components REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 20 to 70% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equi p- ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip- ment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual- ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damag e to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipmentɹɹ (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng pro- tection circuit/device or providing backup circuits in your equipment. REMINDERS