DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 23
Technical content
Spec No. TQ3C-8EAF0-E1YAG35-01 SPEC Date October 15, 2014 TYPE : TCG104VGLABANN-AN30 <10.4 inch VGA transmissive color TFT with LED backlight and constant current circuit for LED backlight> KYOCERA DISPLAY CORPORATION This specification is subject to change without notice. Consult Kyocera before ordering. Original Issue Date Designed by: Engineering dept. Confirmed by: QA dept. Prepared Checked Approved Checked Approved July 25, 2013
CONTENTS
- Application 2. Construction and outline 3. Mechanical specifications 4. Absolute maximum ratings 5. Electrical characteristics 6. Optical characteristics 7. Interface signals 8. Input timing characteristics 9. Lot number identification 10. Warranty 11. Precautions for use 12. Reliability test data 13. Outline drawing Nov 17, 2014
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page Warning 1. This Kyocera LCD module has been specifically designed for use only in electronic devices and industrial machines in the area of audio control, office automation, indust rial control, home appliances, etc. The module should not be used in applications where the highest level of safety and reliability are required and module failure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. Such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. Kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. Customer agrees to indemni fy, defend and hold Kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of Customer's use, or sa le for use, or Kyocera modules in applications. Caution 1. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer i n a two-year period.
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page Revision record Date Designed by : Engineering dept. Confirmed by : QA dept. Prepared Checked Approved Checked Approved October 15, 2014 Rev.No. Date Page Descriptions 01 Oct 15,2014 4 5-2. Constant current circuit for LED Backlight change Operating life time Typ70,000h →100,000h
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 1. Application This document defines the specification of TCG104VGLABANN-AN30. (RoHS Compliant) 2. Construction and outline LCD Backlight system Polarizer Additional circuit : Transmissive color dot matrix type TFT : LED : Anti-Glare treatment : Timing controller, Power supply (3.3V input) With constant current circuit for LED B acklight (12V) 3. Mechanical specifications Item Specification Unit Outline dimensions 1) 240.7(W)×(180.2)(H)×9(D) mm Active area 211.2(W)×158.4(H) (26.4cm/10.4 inch(Diagonal)) mm Dot format 640×(R,G,B)(W)×480(H) dot Dot pitch 0.11(W)×0.33(H) mm Base color 2) Normally White - Mass 470 g 1) Projection not included. Please refer to outline for details. 2) Due to the characteristics of the LCD material, the color varies wi th environmental temperature.
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 4. Absolute maximum ratings 4-1. Electrical absolute maximum ratings Item Symbol Min. Max. Unit Supply voltage(+3.3V) VDD 0 4.0 V Supply voltage(+12V) VIN -0.3 14.0 V Input signal voltage 1) VI1 -0.3 6.0 V 2) VI2 -0.3 VIN V 1) Input signal : CK, R0～R5, G0～G5, B0～B5, HSYNC, VSYNC, ENAB, R/L, U/D 2) Input signal : BLBRT, BLEN 4-2. Environmental absolute maximum ratings Item Symbol Min. Max. Unit Operating temperature 1) TOP -20 70 °C Storage temperature 2) TSTO -30 80 °C Operating humidity 3) HOP 10 4) %RH Storage humidity 3) HSTO 10 4) %RH Vibration - 5) 5) - Shock - 6) 6) - 1) Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25°C, anoth er temperature range should be confirmed. 2) Temp. = -30°C＜48h , Temp. = 80°C＜168h Store LCD at normal temperature/humidity. Keep them free from vibration and shock. An LCD that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard. (Please refer to “Precautions for Use” for details.) 3) Non-condensing 4) Temp.≦40°C, 85%RH Max. Temp.＞40°C, Absolute humidity shall be less than 85%RH at 40°C. Frequency 10～55 Hz Acceleration value (0.3～9 m/s2) Vibration width 0.15mm Interval 10-55-10 Hz １minutes 2 hours in each direction X, Y, Z (6 hours total) EIAJ ED-2531 6) Acceleration: 490 m/s 2, Pulse width: 11 ms 3 times in each direction: ±X, ±Y, ±Z EIAJ ED-2531
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 5. Electrical characteristics 5-1. LCD Temp. = -20～70°C Item Symbol Condition Min. Typ. Max. Unit Supply voltage 1) VDD - 3.0 3.3 3.6 V Current consumption IDD 2) － 150 185 mA Permissive input ripple voltage VRP - - － － 100 Input signal voltage 3) VIL "Low" level 0 － 0.8 V VIH "High" level 2.0 － VDD V 1) VDD-turn-on conditions 0＜t1≦20ms 0＜t2≦50ms 0＜t3≦1s 2) Display pattern: VDD = 3.3V, Temp. = 25°C 479 480 (dot) 3) Input signal : CK, R0～R5, G0～G5, B0～B5, HSYNC, VSYNC, ENAB, R/L, U/D
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 5-2. Constant current circuit for LED Backlight Temp. = -20～70°C Item Symbol Condition Min. Typ. Max. Unit Supply voltage 1) VIN - 10.8 12.0 13.2 V Current consumption IIN 2) - (375) (490) mA Permissive input ripple voltage VRP_BL VIN=12.0V - - 100 mVp-p BLBRT Input signal voltage VIL_BLBRT "Low" level 0 - 0.8 V VIH_BLBRT "High" level 2.3 - VIN V BLBRT Input pull-down resistance RIN_BLBRT - 100 300 500 kΩ BLEN Input signal voltage VIL_BLEN "Low" level 0 - 0.8 V VIH_BLEN "High" level 2.3 - VIN V BLEN Input pull-down resistance RIN_BLEN - 100 300 500 kΩ PWM Frequency 3) fPWM - 200 - 10k Hz PWM Duty ratio 3) DPWM fPWM=200Hz 1 - 100 % fPWM=2kHz 10 100 % fPWM=10kHz 50 100 % Operating life time 4), 5) T Temp.=25°C - 100,000 - h 1) VIN-turn-on conditions After signal is input, it will take 200ms(Min.) to stabilize power of backlight. Meanwhile, ton of BLBRT should be more than 200 μ s. 0.9VIN 0ms (min) 0.1VINVIN BLEN 0ms (min) 0ms (min) 0ms (min) BLBRT LED Backlight PWM signal ON OFF OFF 200ms (min) 2) VIN = 12V, Temp. = 25℃，DPWM = 100%
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 3) PWM Timing Diagram tON，tOFF ≧ 50μs. In case of lower frequency, the deterioration of the display quality, flicker etc., may occur. 4) When brightness decrease 50% of minimum brightness. The average life of a LED will decrease when the LCD is operating at higher temperatures. 5) Life time is estimated data.(Condition : IF=60mA, Ta=25 ℃ in chamber).
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 6. Optical characteristics Measuring spot =φ6.0mm, Temp. = 25°C Item Symbol Condition Min. Typ. Max. Unit Response time Rise τ r θ=φ=0° － 10 － ms Down τ d θ=φ=0° － 20 － ms Viewing angle range View direction : 6 o’clock (Gray inversion) θUPPER CR≧10 － 60 － deg θLOWER － 70 － φLEFT － 70 － deg φRIGHT － 70 － Contrast ratio CR θ=φ=0° 350 500 － － Brightness L IF=60mA/Line 560 800 － cd/m2 Chromaticity coordinates Red x θ=φ=0° 0.555 0.605 0.655 y 0.285 0.335 0.385 Green x θ=φ=0° 0.290 0.340 0.390 y 0.490 0.540 0.590 Blue x θ=φ=0° 0.105 0.155 0.205 y 0.055 0.105 0.155 White x θ=φ=0° 0.255 0.305 0.355 y 0.265 0.315 0.365 6-1. Definition of contrast ratio CR(Contrast ratio) ＝ Brightness with all pixels "White" Brightness with all pixels "Black" 6-2. Definition of response t ime Brightness 100% 90% τd 90% 10% τr White Black White
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 6-3. Definition of viewing angle 6-4. Brightness measuring points 1) Rating is defined as the white brightness at center of display screen(3). 2) 5 minutes after LED is turned on. (Ambient Temp.=25 ℃) -x +x φ=0° θLOWER θUPPER -x +x θ=0° φRIGHTφLEFT θ direction φ direction (dot) (dot)１６０×3 ３２0×3 ４８0×3 １２０ ２４0 ３６0
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 7. Interface signals 7-1. LCD No. Symbol Description I/O Note
1 GND GND -
2 GND GND -
3 GND GND -
4 BLBRT PWM signal(Brightness adjustment) -
5 BLEN ON/OFF terminal voltage -
6 VIN +12V power supply -
7 VIN +12V power supply -
8 VIN +12V power supply -
9 NC No connect -
10 U/D Vertical display mode select signa l
H : Normal , L : Up / Down reverse mode I 2)
11 R/L Horizontal display mode select signa l
L : Normal , H : Left / Right reverse mod e I 2) 12 VDD 3.3V power supply - 13 VDD 3.3V power supply -
14 ENAB Signal to settle the horizontal display position (positive) I 1)
15 GND GND -
16 B5 BLUE data signal (MSB) I
17 B4 BLUE data signal I
18 B3 BLUE data signal I
19 B2 BLUE data signal I
20 B1 BLUE data signal I
21 B0 BLUE data signal (LSB) I
22 GND GND -
23 G5 GREEN data signal (MSB) I
24 G4 GREEN data signal I
25 G3 GREEN data signal I
26 G2 GREEN data signal I
27 G1 GREEN data signal I
28 G0 GREEN data signal (LSB) I
29 GND GND -
30 R5 RED data signal (MSB) I
31 R4 RED data signal I
32 R3 RED data signal I
33 R2 RED data signal I
34 R1 RED data signal I
35 R0 RED data signal (LSB) I
36 GND GND -
37 VSYNC Vertical synchronous signal (negative) I
38 HSYNC Horizontal synchronous signal (negative) I
39 CK Clock signal for sampling each data signal I
40 GND GND -
LCD connector ： 04 6240 040 023 846+ (KYOCERA Connector Products) Recommended matching FFC or FPC ： 0.5mm pitch
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 1) The horizontal display start timing is settled in accordance with a rising timing of ENAB signal. In case ENAB is fixed "Low", the horizontal start timing is determined. Don't keep ENAB "High" during operation. R/L = L R/L = H U/D = H U/D = H R/L = L R/L = H U/D = L U/D = L
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 8. Input timing characteristics 8-1. Timing characteristics Item Symbol Min Typ Max Unit Note Clock Frequency 1/Tc 22.66 25.18 27.69 MHz Duty ratio Tch/Tc 40 50 60 % Data Set up time Tds 5 － － ns Hold time Tdh 10 － － ns Horizontal sync. signal Cycle TH 30.0 31.8 － μs 770 800 850 clock Pulse width THp 2 96 200 clock Vertical sync. signal Cycle TV 515 525 560 line Pulse width TVp 2 － 34 line Horizontal display period THd 640 clock Hsync,-Clock phase difference THc 10 － Tc-10 ns Hsync-Vsync. phase difference TVh 2Tc － TH-THp-1 ns Vertical sync. signal start position TVs 34 line Vertical display period TVd 480 line 1) In case of lower frequency, the deterioration of th e display quality, flicker etc., may occur. 2) CK count of each Horizontal Scanning Time should be always the same.Vertical invalid data period should be "n" X "Horizontal Scanning Time". (n: integer) Frame period should be always the same. 8-2. Horizontal display position Item Symbol Min Typ Max Unit Note Enable signal Set up time Tes 5 － Tc-10 ns Pulse width Tep 2 640 TH-10 clock HSYNC – Enable signal phase difference The 44 － TH-664 clock 1) The horizontal display position is determined by ENA B signal. 2) When ENAB is fixed at " Low", the display starts from the data of C 104(clock) as shown in 8 -5. 8-3. Vertical display position 1) The vertical display position (TVs) is 34th line. 2) ENAB signal is independent of vertical display posit ion.
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 8-4. Input Data Signals and Display position on the screen Ｄ１，ＤＨ１ Ｄ２，ＤＨ１ Ｄ３，ＤＨ１ Ｄ６４０，ＤＨ１ G B Ｄ１，ＤＨ４８０ Ｄ２，ＤＨ４８０ Ｄ３，ＤＨ４８０ Ｄ１，ＤＨ２ Ｄ２，ＤＨ２ Ｄ３，ＤＨ２ R 8-5. Input timing characteristics 1) When ENAB is fixed at ”L ow”, the display starts from the data of C 104(Clock). 2) The vertical display position(TVs) is fixe d at 34th line. Horizontal sync. Signal (Hsync) THp TH THc Tch Tcl Tds Tdh D1 D2 D640 Vertical invalid data period The Tes THd Tep TVp TVh TVs TV TVd DH1 DH2 DH480 Clock signal(CK) Data signal (R0～R5,G0～G5, B0～B5) Data Enable signal (ENAB) Vertical sync. Signal(Vsync) Horizontal sync. (Hsync) Data signal (R0～R5,G0～G5, B0～B5) Vertical invalid data period Number of H-data C1 C2 CN1) 1line Nline2) ………… 0.7VDD 0.3VDD 0.7VDD 0.3VDD 0.3VDD 0.3VDD 0.3VDD 0.3VDD 0.7VDD 0.7VDD 0.7VDD 0.7VDD 0.7VDD 0.3VDD 0.3VDD 0.3VDD 0.7VDD 0.3VDD 0.7VDD Tc Horizontal invalid period Horizontal invalid data period
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 9. Lot number identification The lot number shall be indicated on the back of the backlight case of each LCD. 1 2 3 4 5 Year 2013 2014 2015 2016 2017 2018 Code 3 4 5 6 7 8 Code 1 2 3 4 5 6 Code 7 8 9 X Y Z 10. Warranty 10-1. Incoming inspection Please inspect the LCD within one month after your receipt. 10-2. Production warranty Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual agreement, replace or re -work defective LCD’s that are shown to be Kyocera’s responsibility. No1. - No5. above indicate 1. Year code 2. Month code 3. Date 4. Version Number 5. Country of origin (Japan or China)
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 11. Precautions for use 11-1. Installation of the LCD 1) A transparent protection plate shall be added to protect the LCD and its polarizer . 2) Please ground either of the mounting (screw) holes located at ea ch corner of an LCD, in order to stabilize brightness and display quality. 3) The LCD shall be installed so that there is no pressure on the LSI chips. 4) The LCD shall be installed flat, without twisting or bending. 5) A transparent protection sheet is attached t o the polarizer. Please remove the protection film slowly before use, paying attention to static electricity. 11-2. Static electricity 1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is required. 2) Workers should use body grounding. Operator should wear ground straps. 11-3. LCD operation 1) The LCD shall be operated within the limits specified. Operation at values outside of these limits may shorten life, and/or harm display images. 2) Please select the best display p attern based on your evaluation because flicker, lines or nonuniformity or unevenness can be visible depending on display patterns. 11-4. Storage 1) The LCD shall be stored within the temperature and humidity limits specified. Store in a dark area, and prot ect the LCD from direct sunlight or fluorescent light. 2) Always store the LCD so that it is free from external pressure onto it. 11-5. Usage 1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles, and/or peeling off of the polarizer may result. 2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and from being pushed or rubbed. 3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a little Ethanol. 4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from any source immediately. 5) Always keep the LCD free from condensation during testing. Co ndensation may permanently spot or stain the polarizer. 6) Do not disassemble LCD because it will result in damage. 7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose the LCD to chemicals such as an active gas . 8) Please do not use solid -base image pattern for long hours because a temporary afterimage may appear. We recommend using scre en saver etc. in cases where a solid -base image pattern must be used. 9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes and mouth. In the case the fluid touches your body; rinse it off right away with wat er and soap.
Spec No. TQ3C-8EAF0-E1YAG35-01 Part No. TCG104VGLABANN-AN30 Page M407011 12. Reliability test data Test item Test condition Test time Judgement High temp. atmosphere 80°C 240h Display function Display quality Current consumption : No defect : No defect : No defect Low temp. atmosphere -30°C 240h Display function Display quality Current consumption : No defect : No defect : No defect High temp. humidity atmosphere 40°C 90% RH 240h Display function Display quality Current consumption : No defect : No defect : No defect Temp. cycle -30°C R.T. 80°C 0.5h 0.5h 0.5h 10cycles Display function Display quality Current consumption : No defect : No defect : No defect High temp. operation 70°C 500h Display function Display quality Current consumption : No defect : No defect : No defect 1) Each test item uses a test LCD o nly once. The tested LCD is not used in any other tests. 2) The LCD is tested in circumstances in which there is no condensation. 3) The reliability test is not an out -going inspection. 4) The result of the reliability test is for your reference purpose only. The reliability test is conducted only to examine the LCD's capability.
Spec No. TQ3C-8EAF0-E2YAG35-00 Date July 25, 2013 KKYOCERA INSPECTION STANDARD TYPE : TCG104VGLABANN-AN30 KYOCERA DISPLAY CORPORATION Original Issue Date Designed by : Engineering dept. Confirmed by : QA dept. Prepared Checked Approved Checked Approved July 25, 2013
Spec No. TQ3C-8EAF0-E2YAG35-00 Part No. TCG104VGLABANN-AN30 Page Revision record Date Designed by : Engineering dept. Confirmed by : QA dept. Prepared Checked Approved Checked Approved Rev.No. Date Page Descriptions
Spec No. TQ3C-8EAF0-E2YAG35-00 Part No. TCG104VGLABANN-AN30 Page Visuals specification 1) Note Note General 1. Customer identified anomalies not defined within this inspection standard shall be reviewed by Kyocera, and an additional standard shall be determined by mutual consent. 2. This inspection standard about the image quality shall be applied to any defect within the active area and shall not be applicable to outside of the area. 3. Inspection conditions Luminance Inspection distance Temperature Direction : 500 Lux min. : 300 mm. : 25 s 5 Υ : Directly above Definition of inspection item Dot defect Bright dot defect The dot is constantly “on” when power applied to the LCD, even when all “Black” data sent to the screen. Inspection tool: 5% Transparency neutral density filter. Count dot: If the dot is visible through the filter. Don’t count dot: If the dot is not visible through the filter. 䠮䠣䠞䠮䠣䠞䠮䠣䠞 䠮䠣䠞䠮䠣䠞䠮䠣䠞 䠮䠣䠞䠮䠣䠞䠮䠣䠞 dot defect Black dot defect The dot is constantly “off” when power applied to the LCD, even when all “White” data sent to the screen. Adjacent dot Adjacent dot defect is defined as two or more bright dot defects or black dot defects. 䠮䠣䠞䠮䠣䠞䠮䠣䠞 䠮䠣䠞䠮䠣䠞䠮䠣䠞 䠮䠣䠞䠮䠣䠞䠮䠣䠞 dot defect External inspection Bubble, Scratch, Foreign particle (Polarizer, Cell, Backlight) Visible operating (all pixels “Black” or “White”) and non operating. Appearance inspection Does not satisfy the value at the spec. Definition of size Definition of circle size 㹢㸻(㹟㸩㹠)/2 Definition of linear size
Spec No. TQ3C-8EAF0-E2YAG35-00 Part No. TCG104VGLABANN-AN30 Page 2) Standard Classification Inspection item Judgement standard Defect (in LCD glass) Dot defect Bright dot defect Acceptable number Bright dot spacing : 4 : 5 mm or more Black dot defect Acceptable number Black dot spacing : 5 : 5 mm or more 2 dot join Bright dot defect Acceptable number : 2 Black dot defect Acceptable number : 3 3 or more dots join Acceptable number : 0 Total dot defects Acceptable number : 5 Max Others White dot, Dark dot (Circle) Size (mm) Acceptable number 0.2 㸺 d ӌ 0.2 (Neglected) 0.2 㸺 d ӌ 0.4 5 0.4 㸺 d ӌ 0.5 3 0.5 㸺 d ӌ 0.4 0 External inspection (Defect on Polarizer or between Polarizer and LCD glass) Polarizer (Scratch) Width (mm) Length (mm) Acceptable number 0.1 㸺 W ӌ 0.1 㸫 1HJOHFWHG 0.1 㸺 W ӌ 0.3 2.0 㸺 L ӌ 5.0 1HJOHFWHG 5.0 㸺 L ӌ 5.0 0 0.3 㸺 W ӌ 0.3 㸫 0 Polarizer (Bubble) Size (mm) Acceptable number 0.2 㸺 d ӌ 0.2 (Neglected) 0.2 㸺 d ӌ 0.3 5 0.3 㸺 d ӌ 0.5 3 0.5 㸺 d ӌ 0.4 0 Foreign particle 㸦Circular shape㸧 Size (mm) Acceptable number 0.2 㸺 d ӌ 0.2 (Neglected) 0.2 㸺 d ӌ 0.4 5 0.4 㸺 d ӌ 0.5 3 0.5 㸺 d ӌ0 .4 0 Foreign particle 㸦Linear shape㸧 Scratch Width (mm) Length (mm) Acceptable number 0.00 㸺 W ӌ 0.03 㸫 1HJOHFWHG 0.03 㸺 W ӌ 0.1 0 2.0 㸺 L ӌ 2.0 1HJOHFWHG 2.0 㸺 L ӌ 4.0 3 4.0 㸺 L ӌ 5.0 0 0.1 㸺 W ӌ0.3 㸫 (According to circular shape)