TCFH-N EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Finger-safe construction for enhanced safety*
  • Amp rating rejection helps prevent overfusing by rejecting higher fuse amp ratings
  • Smallest installed fuse and holder footprint of any Class J or R installation
  • All holders dovetail together to create the required number of poles, mixed 30, 60 and 100 A holders dovetail together
  • 30, 60 and 100 A holders have dual wire rated box lug terminals for wiring ease
  • 200, 225 and 400 A holders available with a variety of lugs and terminal shrouds for application flexibility
  • Up to 300 kA SCCR withstands high fault currents * 200, 225 and 400 A holders require installed shrouds. Technical Data 9007 Effective March 2019 Supersedes February 2019 BUSSMANN SERIES

UL Class CF CUBEFuse holders Eaton.com/bussmannseries 30, 60 and 100 A CUBEFuse holder fuse applications Holder catalog no. Volts CUBEFuse type and amp range TCF and TCF_RN FCF_RN WCF_RN TCFH30N 600 1-30 1-30 —TCFH60N 1-60 1-60 TCFH100N 1-100 1-100 TCFH30NW 690 — — 1-30 TCFH60NW 1-60 TCFH100NW 1-100 Conductor ratings and torque for 30, 60 and 100 A holders Ratings are for 75°C Cu AWG solid/stranded conductors. Torque is in N•m (lb-in). Terminal wire rating Holder catalog no. TCFH30N / TCFH30NW TCFH60N / TCFH60NW TCFH100N / TCFH100NW Single 8-10; 2.8 (25), 12-18; 2.6 (20) 10-14; 2.6 (20), 4-8; 3.9 (35) 10-18; 2.6 (20)**, 1-8; 4.5 (40)† * 10-18 AWG stranded, 14-18 AWG solid ** Solid and stranded † Stranded Carton quantity and weight Amp rating Qty. Weight per carton lb (kg) 30 12 2.42 (1 .10) 60 12 2.57 (1 .17) 100 6 1 .38 (0.63) All 30, 60 and 100 A CUBEFuse holders dovetail together to create the desired number of poles. Each holder accepts CUBEFuse amp ratings up to its rating. E.g., the 60 amp holder will accept a CUBEFuse from 1 to 60 A. Amps H I J K L M Max height with fuse Dimensions — in (mm) Recommended Bussmann series fuses Type Amp range Data sheet 600 volt UL Listed Time-delay indicating Low-Peak™ 6-100 A 9000 Time-delay non-indicating Low-Peak 1-100 A Fast-acting non-indicating 1-100 A 2147 690 volt UL Recognized Fast-acting wind power 1-100 A 9009

UL Class CF CUBEFuse holders Eaton.com/bussmannseries 200, 225 and 400 A CUBEFuse holder fuse applications Holder catalog no. Volts CUBEFuse amp range TCFH200N

600 Vac/300 Vdc

TCFH400N 110-400* * Achieving 400 A continuous current requires three ganged holders and installed lug catalog number CCP2-L4B-3 to permit the necessary copper conductor size. Available lug kits For complete installation, the 200, 225 and 400 A CUBEFuse holders require lugs. The table below contains the information necessary for ordering the desired lug kit for the application. Accessories Catalog no. Holder amps Description CCP2-TS2-3 3-pole terminal shroud CCP2-PB2 Phase barriers (pack of 2) CCP2-CWK2 1/4” QC terminals. Use with CCP2-L2-1A, CCP2-MW2-3 and CCP2-MW2-6 lugs (pack of 12) CCP2-TS6-3 400 3-pole terminal shroud CCP2-PB6 Phase barriers (pack of 2) Recommended Bussmann series fuses Type Amp range Data sheet Time-delay indicating Low-Peak 110-400 A 9000 Time-delay non-indicating Low-Peak Available lugs, conductor ratings and terminal torques Catalog no. Description Lugs per cat. no. Wire range AWG (mm2) Wire type/ temp. Conductor torque N•m (lb-in) Lug mounting screw torque N•m (lb-in) 200/225 A holders CCP2-L2-1 Stainless steel lug 1 350-4 (185-25) Cu 75°C 20.3 (180) 0.9 (8) CCP2-L2-1A Aluminum lug* 1 350-4 (185-25) Cu/Al 75°C 28.2 (250) 13.5 (120) CCP2-MW2-3 3-port multi-wire terminal with shroud*† 3 2-14 (35-2.5) Cu/Al 75°C 7 .9 (70) 10.8 (95) CCP2-MW2-6 6-port multi-wire terminal with shroud*† 3 6-14 (16-2.5) Cu/Al 75°C 2.8 (25) 10.8 (95) * These lugs also accept 1/4” quick connect control wire terminals. Order catalog number CCP2-CWK2 (package of 12 terminals).

400 A holders

CCP2-L4-1 Stainless steel lug 1 500-3 (240-35) Cu 75°C 42.0 (375) 22.0 (200) CCP2-L4-1A Aluminum lug 1 500-3 (240-35) Cu/Al 75°C 42.0 (375) CCP2-L4B-3 Stainless steel lug kit with shroud† 3 750-500 (400-240) Cu 75°C 57 .0 (500) CCP2-L4B-3A Aluminum lug kit with shroud† 3 750-500 (400-240) Cu/Al 75°C 62.0 (550) CCP2-L6-3 2-port stainless steel lug kit with shroud 3 (2) 500-2 (240-35) Cu 75°C 42.0 (375) CCP2-L6-3A 2-port aluminum lug kit with shroud 3 (2) 500-2 (240-35) Cu/Al 75°C 42.0 (375) CCP2-MW6-6 6-port multi-wire terminal with shroud† 3 1/0-14 (50-2.5) Cu/Al 75°C 10-14 = 3.9 (35) 8 = 4.5 (40) 4-6 = 5.0 (45 1/0-2 = 5.6 (50) † This is a lug kit with three lugs and a shroud for installation on three ganged CUBEFuse holders. Carton quantity Catalog no. Description Qty. 200/225 A holders TCFH200N 1-pole 200 A holder 1 TCFH225N 1-pole 225 A holder 1 CCP2-L2-1 Stainless steel lug 1 CCP2-L2-1A Aluminum lug 1 CCP2-MW2-3 3-port multi-wire terminal with shroud 3 CCP2-MW2-6 6-port multi-wire terminal with shroud 3 CCP2-CWK2 1/4” quick connect control wire terminals 12 CCP2-TS2-3 3-pole terminal shroud 1 CCP2-PB2 Phase barriers (pack of 2) 2 TCFH400N 1-pole 400 A holder 1 CCP2-L4-1 Stainless steel lug 1 CCP2-L4-1A Aluminum lug 1 CCP2-L4B-3 Aluminum lug kit with shroud 3 CCP2-L4B-3A Aluminum lug kit with shroud 3 CCP2-MW6-6 6-port multi-wire terminal with shroud 3 CCP2-TS6-3 3-pole terminal shroud 1 CCP2-PB6 Phase barriers (pack of 2) 2 Lug Terminal shroud All 200, 225 and 400 amp holders require installing lugs. Only three ganged holders can accept terminal shrouds. See table below.

UL Class CF CUBEFuse holders Eaton.com/bussmannseries 167.7 (6.6) 27.5 (1.1) 43.66 33.4 (1.3)

400 A holder

276.0 (10.9) 99.6 (3.9) 139.2 (5.5) 3-pole ganged 400 A holder with installed shroud 40.7 (1.6) 25.3 (1.0) 34.9 (1.4) 23.9 (0.9) 124.5 (4.9) 2xØ 4.2 (0.2) Dimensions — mm (in) 200/225 A holder 87.6 (3.4) 282.6 (11.1) 104.8 4.1) 108.1 (4.2) 3-pole ganged 200 A holder with installed shroud

UL Class CF CUBEFuse holders Eaton.com/bussmannseries Ordering a complete 200/225 A holder installation For a complete installation, select from the following required and optional components, and accessories. Catalog no. Holders Amps Poles Required TCFH200N 200 Order required quantity for installation TCFH225N 225 And Lug kits Description CCP2-L2-1 Stainless steel lug, 75° Cu only, 350 kcmil-4, 1 per pack CCP2-L2-1A Aluminum lug, 75°C Cu/Al, 350 kcmil-4, 1 per pack CCP2-MW2-3 3-port multi-wire lug, 75°C Cu/Al, 2-14, 3 per pack, includes terminal shroud CCP2-MW2-6 6-port multi-wire lug, 75°C Cu/Al, 6-14, 3 per pack, includes terminal shroud And Accessories Terminal shrouds Description CCP2-TS2-3 3-pole terminal shroud with phase shields, 1 per pack Phase barriers Description CCP2-PB2 Phase barriers, 2 per pack And Control terminals Description CCP2-CWK2 1/4” quick-connect control wire terminals - mounts on installed lug (cannot be used with lug CCP2-L2-1), 12 per pack

UL Class CF CUBEFuse holdersTechnical Data 9007 Effective March 2019 The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Eaton, Bussmann, CUBEFuse, and Low-Peak are valuable trademarks of Eaton in the US and other countries. Y ou are not permitted to use the Eaton trademarks without prior writ - ten consent of Eaton. CSA is a registered trademark of the Canadian Standards Group UL is a registered trademark of the Underwriters Laboratories, Inc. Eaton

1000 Eaton Boulevard

Cleveland, OH 44122 United States Eaton.com Bussmann Division

114 Old State Road

Ellisville, MO 63021 United States Eaton.com/bussmannseries © 2019 Eaton All Rights Reserved Printed in USA Publication No. 9007 – BU-SB18087 March 2019 For Eaton’s Bussmann series product information, call 1-855-287-7626 or visit: Eaton.com/bussmannseries Follow us on social media to get the latest product and support information. Ordering a complete 400 A holder installation For a complete installation, select from the following required and optional components, and accessories. Catalog no. Holder Amps Poles Required TCFH400N 400 1 Order required quantity for installation And Lug kits Description CCP2-L4-1 Stainless steel lug, 75° Cu only, 500 kcmil-3, 1 per pack CCP2-L4-1A Aluminum lug, 75° Cu only, 500 kcmil-3, 1 per pack CCP2-L4B-3 Stainless steel lug, 75° Cu only, 750-500 kcmil, 3 per pack, includes terminal shroud CCP2-L4B-3A Aluminum lug, 75°C Cu/Al, 750-500 kcmil, 3 per pack, includes terminal shroud CCP2-L6-3 2-port stainless steel lug, 75° Cu only, 500 kcmil-2, 3 per pack, includes terminal shroud CCP2-L6-3A 2-port aluminum lug, 75° Cu only, 500 kcmil-2, 3 per pack, includes terminal shroud CCP2-MW6-6 6-port multi-wire lug, 75°C Cu/Al, 1/0-14, 3 per pack, includes terminal shroud And Accessories Terminal shrouds Description CCP2-TS6-3 3-pole terminal shroud with phase shields, 1 per pack Phase barriers Description CCP2-PB6 Phase barriers, 2 per pack