TCD136C-2 TOSHIBA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
TENTATIVE TOSHIBA CCD LINEAR IMAGE SENSOR CCD(Charge Coupled Device) TCD136C-2 The TCD136C-2 is 520-elements x3 color (1560 elements) CCD color linear image sensor. CCD chip covered with Red, Green and Blue Color Filters. The sensor can be used for color copy M/C and color = image scanner. = —S FEATURES N= © Number of Image Sensing Elements : 1560 (520x3 color sequential) ® Image Sensing Element Size : 12m by 474m on 63.5um WD1P22-C-400-2. 544 centers Weight : 4.9g (Typ.) © Photo Sensing Region : High sensitive pn photodiode © Clock : 2 phase @ Package : 22 pin DIP © Color Filter : Red, Green, Blue PIN CONNECTIONS MAXIMUM RATINGS (Note 1) CHARACTERISTIC SYMBOL RATING UNIT Ne [ai] ss Clock Pulse Voltage 2a [2] ss Shift Pulse Voltage Reset Pulse Voltage Power Supply Voltage eens] Ll os Operating Temperature | Tow | o-eo fe | 8 Storage Temperature -25~85 Nc [16] sH (Note 1) All voltage are with respect to 5S terminals neLa] [is] nc (Ground). nef 9 | [4] nc ne [ro] ne «El me (TOP VIEW) 2610016802 malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook 1997-06-30 1/10
S]S]afouf... PHOTO | tay. 3 BlalS1S0" piove ES. 8 os Ga) en op oe CVA CCD ANALOG SHIFT REGISTER (Z RS 28 31a ga SS Bs BS 8 PIN NAMES Clock (Phase 1) Clock (Phase 2) Final Stage Clock (Phase 2) “sit [shift Gate Reset Gate 0s [signal Outpt [00 [Power cround Non Connection 961001¢BA2" @ ‘he products described in this document are subject to foreign exchange and foreign trade control laws © The information contained herein presented only ab a guide for the applications of our products. No responsibilty is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others @ The Information contained herein is subject to change without notice 1997-06-30 2/10
OPTICAL / ELECTRICAL CHARACTERISTICS (Ta =25°C, Vop = 12V, Vg =Vps =Vsy = 12V (PULSE), fg = 1MHz, tT (INTEGRATION TIME) = 10ms, LIGHT SOURCE =A LIGHT SOURCE + CM500S FILTER (t= 1.0mm), LOAD RESISTANCE = 100k) CHARACTERISTIC SYMBOL | win. | ve. | max. | UNIT NOTE Sensitivity (Red) [Re 7] 25 | 33 | Wins | (Note 2) Sensitivity (Green) [Rg | 16 | 23 | 30 | Viles | (Note 2) Sensitivity (Blue) [Re | 06 | 09 | 12 | vites | (Note 2) Photo Response Non Uniformity prNuU | — | — | 10 | % | (Note 3) Saturation Output Voltage [Vsar | 08 | 10 | — |v (ote «| Dark Signal Voltage Vork_ | — | 5 | 10 | mv | (Note 6) Dark Signal Non Uniformity psnu_ | — | — | 5 [ mv | (Note 7) DC Power Dissipation i Total Transfer Efficiency Lime [2 [ss |— [x |_| [Output impedance ———SCS~dS | ep | Dynamic Range [oe | — | 160 | — |_| Wote a) DC Signal Output Voltage | Vos | 30 [ — | 80 | v_ (Note 9) (Note 2) Sensitivity is defined for each color of signal outputs average when the photosensitive surface is applied with the light of uniform illumination and uniform color temperature. (Note 3) PRNU is defined for each color on a single chip by the expressions below when the photosensitive surface is applied with the light of uniform illumination 1 and uniform color temperature. PRNU=—S2— x 100 (%) Where % is average of referred outputs and Ax is the maximum deviation from x. The amount of the incident light is shown below. Red = 1 SE =— SE Green 2 SI Blue=— SE ue=— (Note 4) Vsat is defined as minimum saturation output voltage of all effective pixels. (Note 5) Definition of SE : SE= sat. (xs) (Note 6) VprK is defined as average dark signal voltage of all effective pixels. 1997-06-30 3/10
(Note 7) DSNU is defined as different voltage between Vprk and ViipK when VmpK is maximum dark signal voltage. (Note 8) Definition of DR : DR= VSAL. VDRK VprK is proportional to tjyT (Integration Time). So the shorter tjyT gets condition makes wider DR value. (Note 9) DC output voltage is defined as follows: Vos ss 1997-06-30 4/10
TOSHIBA |||) TCD 1366-2 OPERATING CONDITION CHARACTERISTIC SYMBOL | min, | orve. | max. | UNIT Yaa [a [| g1A Clock Pulse Volege Von [0 [es [os | Final Sage Goce puts Veleoe “es [To [os fos | * ; a Shift Puke Vottege ‘hoes es | Ce ws pepe Power Supply Voage [Yoo [ie [sv CLOCK CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL | min | rye. | max. | UNIT Clock Pulse Frequency a a Reset Pulse Frequency ee Clock Capacitance [cya [50700 oF Final Stage Clock Capacitance oe Shift Gate Capacitance [su [= [200300 |v Reset Gate Capacitance [ens to 20 TO 1997-06305
oza4 o9a « 6191 6sa 2 Pa bz oa tion isa “ Be o1gt osa = Be 6091 eva 2 8091 oosis « 2091 6SSIS o 9091 essls ° S091 LSSis = g g vost gssis bal 2 = a) B
2 Fd z
2 9s Bs ° = $s é ss “s ° 5| 2 é ¥s 9s 3} 8 | €s ss « Fr * zs vs ° gs) § ts es “ 3 os zs ¢ ev ts e = ey 8va « 4 E o reo 7 ly ava B52 SEG) a adn 5 “e © = 2 9€ seq 9 2 a ag = sez 5 vl via aba 2 zea) 5 et ela S38 © a za Sal 8 Bz) 3 z 2% t 20 ° a E 5 2 < < g Ea ES & 2 8 i 1997-06-30 6/10
1 ts ‘6 hid a aa as te a 0 os Wy, CHARACTERISTIC SYMBOL | wn. | (nate 10) UNIT Pulse Timing of SH and s1A a SH Pulse Rise Time, Fall Time | ta {io | 50 [| — [ns | SH Pulse Width | #3 | tooo | sooo | — | ns | #1A, $2A,B Pulse Rise Time, Fall Time | we { oo | too f — {ns | [RS Pulse Rise Time, Fall Time fe, tro. P50 OP Ts RS Pulse Width a Pulse Timing of 2B and RS a Video Data Delay Timing (Note 1) [| tz | = so P= ts (Note 10) TYP, is the case of fps = 1MHz. (Note 11) Load Resistance is 100kQ.. 1997-06-30 7/10
TYPICAL PERFORMANCE CURVES SPECTRAL RESPONSE 1.0) + eT eS 0.8} aA Va ai TOY OK TOY OK PAIN WAVE LENGTH A (nm) ELEMENT SHAPE Unit in mm 63.5 1997-06-30 8/10
- Window Glass The dust and stain on the glass window of the package degrade optical performance of CCD sensor. Keep the glass window clean by saturating a cotton swab in alcohol and lightly wiping the surface, and allow the glass to dry, by blowing with filtered dry N2. Care should be taken to avoid mechanical or thermal shock because the glass window is easily to damage. 2. Electrostatic Breakdown Store in shorting clip or in conductive foam to avoid electrostatic breakdown. 3. Incident Light CCD sensor is sensitive to infrared light. Note that infrared light component degrades resolution and PRNU of CCD sensor. 4. Lead Frame Forming Since this package is not strong against mechanical stress, you should not reform the lead frame. We recommend to use a IC-inserter when you assemble to PCB. 1997-06-30 9/10
WDIP22-C-400-2.54A (A) Unit : mm ee = Pee!
3 SF) g er| &
a ‘o| Pa o i S| 8 3 s eS 1 14 a 48.640.5 Pi CT co 3 3 2 —& - apaaniananl a 18 7 f = g | 5 3 | 3 1.0220.1 (Note 1) No.1 SENSOR ELEMENT (S1) TO EDGE OF PACKAGE. (Note 2) TOP OF CHIP TO BOTTOM OF PACKAGE. (Note 3) GLASS THICKNES (n= 1.5) Weight : 4.9g (Typ.) 1997-06-30 10/10