TCA1D105M

TC ROHM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

Rev.A 1/13 Chip tantalum capacitors TC Series zFeatures ( M ) zExternal dimensions (Unit : mm) Newly designed ROHM original CSP structure ( face-down terminal ) provides, 1) Excellent adhesion. M caseDimensions L H S (Unit : mm) Anode mark L W 1 H W 2 SS 0.5 0.1+− 0.8 0.1+− 0.55 0.1+− 0.85 0.1+− 1.6 0.1+− 2) Easy visual recognition of fillets. 3) Expanded capacitance range with Low ESR. zFeatures ( P , A ) zExternal dimensions (Unit : mm) 1) Vital for all hybrid integrated circuits board application. P caseDimensions L H S Max.1.20 SS W H L W Anode mark (Unit : mm) 1.6 0.2+− 1.2 0.2+− 1.6 0.2+− 0.8 0.3+− 0.9 0.2+− 1.25 0.2+− 0.45 0.3+− A case + − 2) Wide capacitance range. 3) Screening by thermal shock. zModel name configuration Case styleSeries name Capacitance tolerance Capacitance tolerance Rated voltage (V) Code Rated voltage M 6.3 4 K Code Nominal capacitance R : Positive electrode on the side opposite to sprocket hole 8 : Tape width M1 A 8 RT 4 7 5C Nominal capacitance in pF in 3 digits: 2 significant figures followed by the figure repesenting the nymber of 0's. M 20%+− 10%+−

Rev.A 2/13 zRated Table. Marking A E J N S W a e j n s w µF Raited voltage (V.DC)

1.0 M,P,A P,A P,A

1.5 A

2.2 M,P,A

P,A P P M,P A

3.3 P,A

P P P,A A

4.7 M,P,A M,P,A M,P,A A

A A A A A A A

6.8 P,A

10 M,P,A

M,P,A W,P,A M,P,A P,A P,A A A

15 P,A P,A A

33 A A

A A 6.3 j J j a Voltge code Voltge code Capacitance code Capacitance code Voltge code j a Capacitance code M case (1608) P case (2012) Acase (3216)

Rev.A 3/13 zCharacteristics Item Performance Test conditions (based on JIS C 5101−1 and JIS C 5101−3) Operating Temperature −55 C∼+125 C Maximum operating temperature with no voltage derating +85 C Rated voltage (VDC) 2016106.34 16106.34 Category voltage (VDC) at 125 C at 85 C 106.342.5 13106.342.5 Surge voltage (VDC) 2620 5.2 5.2 DC Leakage current 0.5 µF or 0.01CV whichever is greater Shown in " Standard list " Tangent of loss angle (Df, tan δ) Impedance Appea- rance ∆C / C Df (tan δ) L.C. Shall be satisfied the voltage on " Standard list " Shall be satisfied allowance range. Shall be satisfied allowance range. Shall be satisfied the voltage on " Standard list " at 85 C M case M case M case M case M case M case Mcase P, Acase P, Acase P,Acase M case P,Acase P, Acase P,Acase Voltage reduction when temperature exceeds+85 C Capacitance tolerance +1.5~2V.DC Measuring frequency : 120 12Hz Measuring voltage : 0.5Vrms Measuring circut : DC Equivalent series circuit +1.5~2V.DC Measuring frequency : 120 12Hz Measuring frequency : 100 10kHz Measuring voltage : 0.5Vrms Measuring voltage : 0.5Vrms or less Measuring circut : DC Equivalent series circuit Resistance to Soldering heat There should be nosignificant abnormality. The indications should be clear. P case P case A case A case Dip in the solder bath Solder temp : 260 5 C Duration : 5 0.5s Repetition : 1 Ratedvoltage for 5min Rated voltage for 1min Less than 200% of initial limit Less than 200% of initial limit Less than 150% of initial limit Less than initial limit Shall be satisfied the value in Item No.6 Within 20% of initial value +− +−20% +−10%, +−20% 10% of initial value+− 5% of initial value+−

Rev.A 4/13 Item Performance Test conditions (based on JIS C 5101−1 and JIS C 5101−3) Repetition : 5 cycles (1 cycle : steps 1~4) without discontinuation. Temp. Time Temperature cycle There should be no significant abnormality.Appea- rance ∆C / C Df (tan δ) Df (tan δ) L.C Moisture resistance Appea- rance Appea- rance ∆C / C L.C −55 3 C Room temp. 125 2 C Room temp. 30 3min 3min.or less 30 3min 3min.or less There should be no significant abnormality. The indications should be Temperature Stebility Temp. −55 C ∆C / C Df (tan δ) L.C − Temp. +85 C ∆C / C L.C 5 µA or 0.1CV whitchever is greater ∆C / C L.C 6.3 µA or 0.125CV whitchever is greater Temp. +125 C Df (tan δ) Shall be satisfied the voltage on " Standard list " Shall be satisfied the voltage on " Standard list " M case M cas A case M case M case P case P , A case P , A case P case A case M case M case P case P , A case A casr M case P case A case M , P case M , P case M , P case M , P case M case P case A case A case A case A case Surgevoltage There should be no significant avnormality. ∆C / C L.C After leaving the sample under such atmospheric condition that the temperature and humidity are 60 2 C and 90 to 95% RH,respectiveiy,for 500 12h leave it at room temperature for 1 to 2h and then measure the sample. Shall be satisfied the voltage on " Standard list " Df (tan δ) Df (tan δ) Apply the spesified sergevoltage every 5 0.5 min. for 30 5 s. each time in the atmospheric condition of 85 2 C. Repeat this rocedure 1,000 times. Less than 200% of initial limit Less than 200% of initial limit Less than 200% of initial limit Less than 200% of initial limit Less than 150% of initial limit Less than 150% of initial limit Less than initial limit Less than initial limit Less than initial limit Shall be satisfied the value in Item No.6 Less than initial limit Within 20% of initial limit +−Within 20% of initial value +−Within 10% of initial value +−Within 20% of initial limit +−Within 10% of initial limit 15~22µF: within 20% of initial value +− 1~10µF: within 10% of initial value +− TCA1A226 , TCA0J476 : Within 15% of intial value Others +−Within 10% of initial value: Within 0/−15% of initial value Within +15/0 of initial value Within +20/0 of initial value Within +15/0% of initial value Within 0/−12% of initial value Within +12/0% of initial value Less than 200% of initial limit Less than initial limit Less than 200% of initial limit Less than 150% of initial limit

Rev.A 5/13 Item Performance Test conditions (based on JIS C 5101−1 and JIS C 5101−3) Loading at High temperature Appearance Appearance Appearance M , A case M case M case M case P case P case A case P case P , A case Terminal strength Capacitance The measured value should be stable. There should nosignificant abnormality. A force is applied to the terminal until it bends to 1mm and by a perscribed tool maintain the condition for5s.(See the figure below) 1mm F (Apply force) (Unit : mm)20 R230 45 45 L.C ∆C / C Df (tan δ) Capacitance 3 / 4 or more surface area of the solder coated terminal dipped in the soldering bath should be covered with the new solder. Dip speed=25 2.5mm / s Pre−treatment(accelerated aging): Leave the sample on the boiling distilled water for 1 h. Solder temp. Vibration Measure value shoule not fluctuate during the measurement. There should no significant abnormality. Frequency : 10 to 55 to 10Hz/min. Amplitude : 1.5mm Time : 2h each in X and Ydirections Mounting : The terminal is soldered on a print circuit board. . : 235 5 C : 2 0.5s : H63A : Rosin25% IPA75% Apply force a circuit board product C105 YAA Adhesiveness The terminal should not come off. Apply force of 5N in the two directions shown in the figure below for 10 1s after mounting the terminal on a circuit board. Dimensions Refer to "External dimensions" Measure using a caliper of JISB 7507 Class 2 or higher grade. The indication should be clear Dip in the isopropyl alcohol for 30 5s, at room temperature. thickness=1.6mm M , P case : After applying the rated voltage for 1000+36 h without discontinuation via the serial resistance of 3Ω or less at a tempera- ture of 85 2 C, leave the sample at room temperature / humidity for 1 to 2h and mea- sure the value. A case : After applying the rated voltage for 2000+72 h without discontinuation via the serial resistance of 3Ω or less at a tempera- ture of 85 2 C, leave the sample at room temperature / humidity for 1 to 2h and mea- sure the value. Resistance to solvents Solderability Duration Solder Flux +−within 15% of initial value +−within 10% of initial value Others TCA1A226 , TCA0J476 There should be nosignificant abnormality. There should be nosignificant abnormality. The indications should be clear. Less than 200% of initial limit Less than initial limit +−Within 20% of initial value +−Within 10% of initial value Less than 200% of initial limit Less than initial limit 150% of initial limit less than A case

Rev.A 6/13 zStandard list, TC series Part No. 0.5 4 2.5 5.2 4.7 6.8 0.5 TC M 0G 475 TC M 0G 106 TC M 0G 226 TC M 0J 475 TC M 0J 685 4.7 TC M 0J 106 10 0.6 TC M 1A 105 1.0 10 20 6.3 13 2.2TC M 1A 225 6.3 4 8 0.5 TC M 1A 475 TC M 1C 105 4.7 1.0 0.5 −55 C 125 C25 C 85 C (Ω) 9.0 9.0 9.0 13.5 15.0 15.020+− 20+− 20+− 20+− < M case : 1608 size > 1.8 =Tolerance (M : )+−20% Rated Voltage 85 C (V) Category Voltage 125 C (V) Surge Voltage 85 C (V) Cap. 120Hz (µF) Tolerance (%) Df 120Hz (%) Impedance 100kHz Leakage Current 25 C 1WV 5min (µA)

Rev.A 7/13 Part No. Rated Voltage 85 C (V) Cstegory Voltage 125 C (V) Surge Voltage 85 C (V) Cap. 120Hz (mF) Tolerance (%) Leakage Current 25 C 1WV.60s (mA) Df 120Hz (%) TC P 0G 106 TC P 0G 156 0.5 15 0.6 TC P 0G 226 TC P 0J 155 20,10 0.9 1.5 1.5 TC P 0G 475 TC P 0G 685 4.7 6.8 TC P 0G 225 2.2 TC P 0G 335 3.3 TC P 0J 225 2.2 2.2 TC P 0J 335 TC P 0J 475 4 2.5 5.2 3.3 3.3 4.7 4.7 6.3 6.8TC P 0J 685 TC P 0J 106 10 6.8 0.5 0.6 0.5 0.5 TC P 0J 156 TC P 1A 105 TC P 1A 155 TC P 1A 225 TC P 1A 335 TC P 1A 475 TC P 1A 685 TC P 1A 106 TC P 1C 105 15 0.9 1.0 1.0 6.3 20,10 −55 C 125 C25 C 85 C 15 10 Impedance 100kHz (Ω) 27.5 27.5 27.5 27.5+− =Tolerance (M : )+−20%,K : + −20,10 20,10 +−10% < P case : 2012 size >

Rev.A 8/13 22 0.9 33 1.3 1.9 2.7 3.3 1.5 0.5 15 0.6 TC A 0G 475 TC A 0G 106 TC A 0G 156 TC A 0G 226 TC A 0G 336 TC A 0G 476 TC A 0G 686 TC A 0J 335 4.7 TC A 0G 685 6.8 TC A 0J 475 4.7 2.2 TC A 0J 685 TC A 0J 106 2.5 5.2 6.8 3.3 4.7 0.5 6.3 13 15TC A 0J 156 TC A 0J 226 22 3.0 0.5 0.7 TC A 0J 336 TC A 0A 476 TC A 1A 155 TC A 1A 225 TC A 1A 335 TC A 1A 475 TC A 1A 685 33 2.1 0.9 6.8 6.3 4 8 20,10 −55 C 125 C25 C 85 C 10 6 (Ω) 20.0 20.0 20.0 20,10+− 20,10 1.0TC A 1A 106 10 12 10 1.5TC A 1A 156 15 1014 12 2.2TC A 1A 226 22 1230 16 TC A 1C 105 1.0 0.5 TC A 1C 155 1.5 TC A 1C 225 2.2 610 10 20TC A 1C 335 3.316 20.0 0.8TC A 1C 475 4.7 20,10 +−20,10 1.1TC A 1C 685 6.8 0.6TC A 1C 106 10 812 10 13 26 0.5TC A 1D 105 1.020 610 8 20.0 < A case : 3216 size > 0.6 1.4 Part No. Cap. 120Hz (µF) Tolerance (%) Df 120Hz (%) Impedance 100kHz Leakage Current 25 C 1WV 5min (µA) Surge Voltage 85 C (V) Category Voltage 125 C (V) Rated Voltage 85 C (V) =Tolerance (M : )+−20%,K : +−10%

Rev.A 9/13 zPackaging specifications Tape [ M case ] Reel [ M case ] Case M Unit : [mm] φ13 0.2 φ60 +10 01.5φ180 9.0 11.4 1.0 Label sticking position EIAJ ET−7002A pull direction +− +1.0 A B Sprolet hold φ Do P1 P2 P0 E F W Sprolet hole φDot1 Pull-out direction B A Tape [ P.A case ] Reek [ P.A case ] P1 P2 P3 E F W Component is loadee Unit : [mm] φ13 0.2 φ60 +10 0−1.5φ180 9.0 11.4 1.0 Labelsticling position EIAJ ET−7002A Pull direction +− +1.0 Case P A 1.55 1.9 2.3 3.5 8.0 8.0 1.75 1.75 3.5 3.5 4.0 4.0 2.0 2.0 4.0 4.0 zPackaging style 4,000pcs 3,000pcs 2,000pcs Case code package Taping M P A Packaging style plastic taping φ180mmReel Symbol R Basic ordering units

Rev.A 10/13 z Electrical characteristics and operation notes (1) Soldering conditions (soldering temperature and soldering time) 130 140 150 160 170 0 60 90 120 150 180 TIME (sec) Preheat Fig.1 reflow soldering 200 220 240 260 280 0 102 03 04 05 06 07 0 TIME (sec) Reflow zone TEMPERATURE ( C) TEMPERATURE ( C) 200 210 220 230 240 250 260 270 0 2 4 6 8 101 21 41 6 TIME (sec) TEMPERATURE ( C) Fig.2 Flow soldering (Dip wave soldering) 280 300 320 340 0 5 10 15 20 25 TIME (sec) Fig.3 Hand soldering (Wattage : 30W MAX.)TEMPERATURE ( C) (2) Leakage current-to-voltage ratio 0.01 0.1 0 204 06 08 0 100 % OF RATED VOLTAGE (VR) Fig.4 LEALKAGE CURRENT RATIO DCL / DCL

Rev.A 11/13 (3) Derating voltage as function of temperature 100 75 85 95 105 115 125 Fig.5 PERCENT OF 85 C RVDC1 (VR) TEMPERATURE ( C) Rated Voltage 6.3 5.2 2.5 6.3 3.4 Surge Voltage Category Voltage Surge Voltage (V.DC) (V.DC) (V.DC) (V.DC)

85 C 125 C

(4) Reliability The malfunction rate of tantalum solid state electrolytic capacitors varies considerably depending on the conditions of usage (ambient temperature, applied voltage, circuit resistance). Formula for calculating malfunction rate λp = λb × (πE × πSR × πQ × πCV) λp : Malfunction rate stemming from operation λb : Basic malfunction rate πE : Environmental factors πSR : Series resistance πQ : Level of malfunction rate πCV : Capacitance For details on how to calculate the malfunction rate stemming from operation, see the tantalum solid state electrolytic capacitors column in MIL-HDBK-217. Malfunction rate as function of operating Malfunction rate as function of circuit resistance (Ω/V) temperature and rated voltage 0.01 0.02 0.03 0.06 0.1 0.2 0.3 0.5 1.0 Ratio= Rated Voltage Applied Voltage 1.0 0.7 0.5 0.3 0.1 20 40 60 85 Fig.6 FAILURE RATE COEFFICIENT OPERATING TEMPERATURE ( C) 0.4 0.6 0.8 1.0 2.0 4.0 6.0 RESISTANCE OF CIRCUIT ( Ω/ V) Fig.7 RESISTANCE COEFFICIENT (π)

Rev.A 12/13 (5) Maximum power dissipation Warming of the capacitor due to ripple voltage balances with warming caused by Joule heating and by radiated heat. Maximum allowable warming of the capacitor is to 5°C above ambient temperature. When warming exceeds 5°C, it can damage the dielectric and cause a short circuit. Power dissipation (P) = I2 • R Ripple current P : As shown in table at right R : Equivalent series resistance Notes: 1. Please be aware that when case size is changed, maximum allowable power dissipation is reduced. 2. Maximum power dissipation varies depending on the package. Be sure to use a case which will keep warming within the limits shown in the table below. Allowable power dissipation (W) and maximum temperature rising Case Temp. 0.070A case (3216) 0.063 0.056 0.028 0.025P case (2012) 0.022 0.020 0.010 5552Max. Temp Rise [ C] +25 C +55 C +85 C +125 C (6) Impedance frequency characteristics (7) ESR frequency characteristics 100 1000 10000 100000 G475 A case (3216) C105 A case (3216) A105 P case (2012) 1 100 10k 1M 500M100M FREQUENCY (Hz) Fig.10 IMPEDANCE (Ω) 0.1 100 G475 A case (3216) C105 A case (3216) A105 P case (2012) 1 100 10k 1M 500M100M FREQUENCY (Hz) Fig.11 ESR (Ω) (8) Temperature characteristics −10 −26 −55 25 CAP 120Hz 85 125 Fig.12 CAP CHANGE (%) 4V−4.7µF A case (3216) 10V−1µF P case (2012) TEMPERATURE ( C) −55 25 DF 120Hz 85 125 Fig.13 DF (%) 4V−4.7µF A case (3216) 10V−1µF P case (2012) TEMPERATURE ( C)

Rev.A 13/13 100 1000 0−55 25 LC 1WV 85 125 Fig.14 LC (nA) 4V−4.7µF A case (3216) 10V−1µF P case (2012) TEMPERATURE ( C) 0−55 25 IMPEDANCE 100kHz 85 125 Fig.15 IMPEDANCE (Ω) 4V−4.7µF A case (3216) 10V−1µF P case (2012) TEMPERATURE ( C) The rush current is in inverse proportion to the ESR. Rush current The excessive rush current may cause a damage. Fig. 16 Max. rush current and ESR ESR Ω (100kHz) 33µF 33µF 100µF tantalum capactior aluminum electrolysis 4.7µF 4.7µF 100 INRUSH CURRENT (A)1 0.1 0.1 1 10 100 47µF Vpp=10V llimit=20A Pulse Width=500µsec. Power OP Amp Slew Rate=10V/6µs 22µF 15µF The rush current may be reduced by the protection resistors Fig. 17 Change in I max by protection resistors V (V) 100 I (A) R I = 0.476+R V 0.1 0.1 1 10 100 I = SAMPLE 16V−3.3µF Pulse width=500µsec Slew rate=10V−6µc Current limit=20A 0.25 1.0 2.0 5.0 0.476 V R=0Ω 0.5

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.