TC90175XBG

TC90175XBG TOSHIBA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

Features

• Analog video signal (CVBS) input ‒ 10bit ADC 1ch, 2-in / 1-out selector switch ‒ Pre-filter (LPF) ‒ 3line-Y / C sepalation ‒ Color decorder for multi color system
• Digital video signal input ‒ LVTTL 1ch 85MHz (max), YUV = 4:2:2 or RGB = 4:4:4 ‒ LVDS (Single 2ch or Dual 1ch) 100MHz (max)@Singel-Link, YUV = 4:4:4/4:2:2 or RGB = 4:4:4 (e.g. 1920x720@60fps) 150MHz (max)@Dual-Link, YUV = 4:4:4/4:2:2 or RGB = 4:4:4 (e.g. 1920x1080@60fps)
• Scaling function ‒ Up / Down scaling ‒ Horizontal averration correction ‒ Trapezoid correction ‒ Nonliner horizontal scaling
• YUV signal process ‒ Edge correction (HVD-Enhancer / NC, Sharpness, CTI) ‒ Static / Dynamic YC-gamma correction ‒ Area-adaptive dynamic YC-gamma correction ‒ Color management ‒ TINT adjustment ‒ Contrast adjustment, Brightness adjustment ‒ Color gain adjustment, Color offset adjustment
• RGB signal process ‒ Offset / Gain adustment ‒ Ganmma correction ‒ Dither process
• Built-in OSD function ‒ Font OSD display ‒ Line drawing
• Digital video signal output ‒ LVTTL 1 ch 80MHz (max), YUV = 4:2:2 or RGB = 4:4:4 T-con signal output (Case of RGB18bit output) ‒ LVDS (Single 2ch or Dual 1ch) 100MHz (max)@Singel-Link, YUV = 4:4:4/4:2:2 or RGB = 4:4:4 (e.g. 1920x720@60fps) 150MHz (max)@Dual-Link, YUV = 4:4:4/4:2:2 or RGB=4:4:4 (e.g. 1920x1080@60fps) ‒ PWM signal output (2 pin)
• PLLwithin SSCGfunction
• I 2C-BUS control
• Operating temperature : -40℃ to 85℃
• Power supply : 1.2 V , 3.3 V
• Package : P-LFBGA293-1717-0.80-001 P-LFBGA293-1717-0.80-001 Weight 0.665g (Typ.)

©2018 TOSHIBA Electronic Devices & Storage Corporation Page 2 Rev.1.00 2018-07-02 1. Block Diagram Figure 1.1 Internal Block diagram I2C-Bus

©2018 TOSHIBA Electronic Devices & Storage Corporation Page 3 Rev.1.00 2018-07-02 2. Electrical Characteristics 2.1 . Absolute Maximum Ratings The absolute maximum ratings are the rated values which must not be exceeded during operation, even for an instant. Exceeding the maximum rating may result in destruction, degradation, or other damages of device. Table 2.1 Absolute Maximum Ratings Parameter Symbol Min Typ. Max Unit Core power supply (1.2 V) VDD12 -0.3 — VSS + 1.8 V Standard I/O power supply (3.3 V) VDD33 - 0.3 — VSS + 3.9 V ADC power supply (1.2 V) A VDD12 - 0.3 — VSS + 1.8 V ADC power supply (3.3 V) AVDD33 - 0.3 — VSS + 3.9 V LVDS-Rx power supply (1.2 V) RVDD12 - 0.3 — VSS + 1.8 V LVDS-Rx power supply (3.3 V) RVDD33 - 0.3 — VSS + 3.9 V LVDS-Tx power supply (1.2 V) TVDD12 - 0.3 — VSS + 1.8 V LVDS-Tx power supply (3.3 V) TVDD33 - 0.3 — VSS + 3.9 V X’tal power supply (3.3 V) XVDD33 - 0.3 — VSS + 3.9 V PLL power supply (1.2 V) PVDD12 - 0.3 — VSS + 1.8 V DC input voltage (3.3 V) VIN33 - 0.3 — VDD33 + 0.3 V DC output voltage (3.3 V) VOUT33 - 0.3 — VDD33 + 0.3 V DC input current IIN — — ± 10 mA Operating ambient temperature Ta - 40 — 85 °C Storage temperature Tstg - 40 — 125 °C

©2018 TOSHIBA Electronic Devices & Storage Corporation Page 4 Rev.1.00 2018-07-02 2.2 . Operating Conditions Table 2.2 Operating conditions Parameter Symbol Min Typ. Max Unit Core power supply (1.2V) VDD12 1.1 1.2 1.3 V Standard I/O power supply (3.3 V) VDD33 3.0 3.3 3.6 V ADC power supply (1.2 V) AVDD12 1.1 1.2 1.3 V ADC power supply (3.3V) AVDD33 3.0 3.3 3.6 V LVDS-Rx power supply (1.2V) RVDD12 1.1 1.2 1.3 V LVDS-Rx power supply (3.3V) RVDD33 3.0 3.3 3.6 V RVDD33 (2.5V mode) 2.3 2 .5 2 .7 V LVDS-Tx power supply (1.2V) TVDD12 1.1 1.2 1.3 V LVDS-Tx power supply (3.3V) TVDD33 3.0 3.3 3.6 V RVDD33 (2.5V mode) 2.3 2 .5 2 .7 V XTAL power supply (3.3V) XVDD33 3.0 3.3 3.6 V PLL power supply (1.2V) PVDD12 1.1 1.2 1.3 V 2.3 . Consumption current Table 2.3 DC characteristic (Consumption current) Parameter Symbol Min Typ. Max Unit Notes Current of Core (1.2V) IDD12 — 210 350 mA PLL1 = 150MHz PLL2 = 75MHz 1dot-crosshatch processing (Notes. 1) Current of Standard I/O (3.3 V) IDD33 — 65 90 mA 75MHz output 1dot-crosshatch processing (Notes. 2) Current of ADC (1.2 V) AIDD12 — 18 25 mA - Current of ADC (3.3V) AIDD33 — 25 35 mA - Current of LVDS-Rx (1.2V) RIDD12 — 75 90 mA When Dual mode Current of LVDS-Rx (3.3V) RIDD33 — 70 110 mA When Dual mode (3.3V mode) — 65 100 mA When Dual mode (2.5V mode) Current of LVDS-Tx (1.2V) TIDD12 — 10 20 mA When Dual mode Current of LVDS-Tx (3.3V) TIDD33 — 100 125 mA When Dual mode (3.3V mode/350mVp-p mode) — 75 95 mA When Dual mode (2.5V mode/225mVp-p mode) Current of XTAL (3.3V) XIDD33 — 5 10 mA - Current of PLL (1.2V) PIDD12 — 10 15 mA - Notes. 1：The consumption current of Core power (IDD12) is depends on operating frequency and using circuit block at this IC. Notes. 2：The consumption current of Standard IO power is depends on the load capacity at output pin. When the load capacity is large value, the consumption current of IDD33 may exceed the above described maximum value.

©2018 TOSHIBA Electronic Devices & Storage Corporation Page 5 Rev.1.00 2018-07-02 2.4 . 3.3V system I/O Table 2.4 DC characteristic (3.3V system I/O) Parameter Symbol Min Typ. Max Unit Notes Input voltage VIH VDDIO×0.8 ― VDDIO V I/O input terminal of 3.3V system VIL VSS ― VDDIO×0.2 I/O input terminal of 3.3V system Input current IIH - 10 ― 10 µA I/O input terminal of 3.3V system IIL - 10 ― 10 I/O input terminal of 3.3V system Output voltage VOH VDD33-0.6 ― VDD33 V I/O output terminal of 3.3V system when load current 4mA VDD33-0.6 ― VDD33 I/O output terminal of 3.3V system when load current 8mA VOL DVSS ― 0.4 I/O output terminal of 3.3V system when load current 4mA DVSS ― 0.4 I/O output terminal of 3.3V system when load current 8mA 2.5 . LVDS input Table 2.5 DC characteristic (LVDS input) Parameter Symbol Min Typ. Max Unit Notes Input voltage VIN 0.2 ― 2.4 V - Absolute input differential voltage |Vid| 100 ― 600 mV - 2.6 . LVDS output Table 2.6 DC characteristic (LVDS output) Parameter Symbol Min Typ. Max Unit Notes Output voltage VOH ― ― 1600 mV RLOAD = 100Ω ± 1% VOL 900 ― ― mV RLOAD = 100Ω ± 1% Absolute differential output voltage |VOD| 250 ― 450 mV RLOAD = 100Ω ± 1% Output offset voltage VOS 1075 ― 1325 mV RLOAD = 100Ω ± 1%

©2018 TOSHIBA Electronic Devices & Storage Corporation Page 6 Rev.1.00 2018-07-02 3. Package Information 3.1 . Package Diagram P- LFBGA293-1717-0.80-001 Unit：mm Weight：0.665g (Typ.) Figure 3.1 Package dimensions

©2018 TOSHIBA Electronic Devices & Storage Corporation Page 7 Rev.1.00 2018-07-02 4. Revision History Table 4.1 Revision History Revision Date Description 1.00 2018-07-02 First Edition

©2018 TOSHIBA Electronic Devices & Storage Corporation Page 8 Rev.1.00 2018-07-02 RESTRICTIONS ON PRODUCT USE Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”. Hardware, software and systems described in this document are collectively referred to as “Product”.

• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.
• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.
• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
• PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MA Y CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT ("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales representative.
• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations.
• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
• ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.