TC4W66F_07 TOSHIBA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Features
- ON-resistance, RON
- OFF-resistance, ROFF ROFF (typ.) > 109 Ω Absolute Maximum Ratings Characteristics Symbol Rating Unit DC supply voltage VDD VSS − 0.5 to VSS + 20 V Control input voltage VC IN VSS − 0.5 to VDD + 0.5 V Switch I/O voltage VI/O VSS − 0.5 to VDD + 0.5 V Power dissipation PD 300 mW Potential difference across I/O during ON VI-VO ±0.5 V Control input current IC IN ±10 mA Operating temperature range Topr −40 to 85 °C Storage temperature Tstg −65 to 150 °C Lead temp./time TL 260°C/10 s Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Marking TC4W66F TC4W66FU TC4W66F TC4W66FU Weight SOP8-P-1.27: 0.05 g (typ.) SSOP8-P-0.65: 0.02 g (typ.)
(1/2 TC4W66F) Pin Assignment (top view) Truth Table Control Impedance Between IN/OUT-OUT/IN (Note 1) H 0.5 to 5 × 10 Ω L >10 Ω Note 1: See static electrical characteristics. Operating Ranges (VSS = 0 V) Characteristics Symbol Test Condition Min Typ. Max Unit DC supply voltage VDD ⎯ 3 ⎯ 18 V Input/output voltage VDD/VOUT ⎯ 0 ⎯ VDD V Static Electrical Characteristics (in case not specifically appointed, VSS = 0 V) Ta = −40°C Ta = 25°C Ta = 85°C Characteristics Symbol Test Circuit Test Condition VDD (V) Min Max Min Typ. Max Min Max Unit Control input high voltage VIH ⎯ ⏐ IIS⏐ = 10 μA 3.5 7.0 11.0 3.5 7.0 11.0 2.75 5.50 8.25 3.5 7.0 11.0 V Control input low voltage VIL ⎯ ⏐ IIS⏐ = 10 μA 1.5 3.0 4.0 2.25 4.5 6.75 1.5 3.0 4.0 1.5 3.0 4.0 V On-state resistance RON ⎯ 0 < = VIS < = VDD RL = 10 kΩ 800 210 140 290 120 950 250 160 1200 300 200 Ω ΔOn-state resistance (between any 2 switches) R ONΔ ⎯ ⎯ Ω Input/output leakage current IOFF ⎯ VIN = 18 V, VOUT = 0 V VIN = 0 V, VOUT = 18 V ±100 ±100 ±0.1 ±0.1 ±100 ±100 ±1000 ±1000 nA Quiescent device current I DD ⎯ VIN = VDD, VSS* 0.25 0.5 1.0 0.001 0.001 0.002 0.25 0.5 1.0 7.5 μA H level I IH ⎯ VIH = 18 V 18 ⎯ 0.1 ⎯ 10−5 0.1 ⎯ 1.0 Input current L level I IL ⎯ VIL = 0 V 18 ⎯ −0.1 ⎯ −10 −5 −0.1 ⎯ −1.0 μA
Dynamic Electrical Characteristics (Ta = 25°C, VSS = 0 V, CL = 50 pF) Characteristics Symbol Test Circuit Test Condition VSS (V) VDD (V) Min Typ. Max Unit Phase difference between input to output φI-O ⎯ C L = 50 pF ns Propagation delay time (CONTROL-OUT) tpZL tpZH RL = 1 kΩ CL = 50 pF 120 ns Propagation delay time (CONTROL-OUT) tpLZ tpHZ RL = 1 kΩ CL = 50 pF ns Max control input repetition Rate fmax (C) RL = 1 kΩ CL = 50 pF MHz −3dB cutoff frequency fmax (I-O) RL = 1 kΩ CL = 50 pF (Note 1) −5 5 ⎯ 30 ⎯ MHz Total harmonic distortion ⎯ ⎯ RL = 10 kΩ f = 1 kHz (Note 2) −5 5 ⎯ 0.03 ⎯ % −50dB feed through frequency ⎯ ⎯ RL = 1 kΩ (Note 3) −5 5 ⎯ 600 ⎯ kHz −50dB crosstalk frequency ⎯ ⎯ RL = 1 kΩ (Note 4) −5 5 ⎯ 1 ⎯ MHz Crosstalk (CONTROL-OUT) ⎯ ⎯ RIN = 1 kΩ ROUT = 10 kΩ CL = 15 pF 200 400 600 mV ⎯ Control input ⎯ 5 7.5 Input capacitance CIN ⎯ Switch I/O ⎯ 10 ⎯ pF Feed through capacitance C IN-OUT ⎯ ⎯ ⎯ 0.5 ⎯ pF Note 1: Since wave of ±2.5 Vp-p shall be used for VIS and the frequency of 20 ℓog 10 IS OS V V = −3dB shall be fmax. Note 2: V IS shall be sine wave of ±2.5 Vp-p. Note 3: Sine wave of ±2.5 Vp-p shall be used for VIS and the frequency of 20 ℓog 10 IS OUT V V = −50dB shall be feed-through. Note 4: Sine wave of ±2.5 Vp-p shall be used for VIS and the frequency of 20 ℓog 10 IS OUT V V = −50dB shall be crosstalk.
- t pLH, tpHL I/O-O/I 2. t pZL, tpZH, tpLZ, tpHZ Control-O/I 3. R ON 4. f max (C)
- Crosstalk (switch I/O) 6. Crosstalk (control input) 7. Total Harmonic Distortion, f max (I/O-O/I), Feedthrough (switch OFF) 0 V 2.5 V −2.5 V f I/O IN.
Weight: 0.05 g (typ.)
Weight: 0.02 g (typ.)
RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL
- The information contained herein is subject to change without notice.
- TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
- The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
- The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
- The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
- Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.