TC4P FRANCEJOINT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
QUALITY & EXPERTISE FOR YOUR SEALING NEEDS || SEAL DESIGN Tolerance for the outside diameter of the seal (ØD) Bore diameter ØD1 (mm) Apparent metal cage Rubber coating Coating with grooves Roundness tolerance Bore diameter ØD1 (mm) Apparent metal cage Rubber coating ØD1 ≤ 50.0 0.18 0.25 50.0 < ØD1 ≤ 80.0 0.25 0.35 80.0 < ØD1 ≤ 120.0 0.30 0.50 120.0 < ØD1 ≤ 180.0 0.40 0.65 180.0 < ØD1 ≤ 300.0 0.25% of the outside diameter 0.80 300.0 < ØD1 ≤ 500.0 0.25% of the outside diameter 1.00 Tolerance for the inside diameter of the seal (Ød) Free and without constraint, the inside diameter of the sealing lip is always smaller than the diameter of the rod. The pre-tightening or interference denotes the difference between these two values. Depending on the rod diameter, the diameter of the sealing lip is generally considered to be less, between 0.8 and 3.5 mm. |DESCRIPTION The TC4P profile is a shaft seal composed of a single metal cage with a rubber coating and a double sealing lip with an integrated spring, suitable for linear movements. |ADVANTAGES Sealing lips designed for linear movements |APPLICATIONS All types of linear applications Shock absorbers Steering |MATERIALS Rubber FKM 75 - 80 Shore A HNBR 75 - 80 Shore A NBR 75 - 80 Shore A Metal cage Steel - AISI 1010 Steel - DC01 C490 Steel - DC01 C590 Spring Steel - AISI 1070 - 1090 Stainless steel - AISI 316 SEALS FOR LINEAR MOVEMENTS TC4P ROTARY SEALS | SEALS FOR LINEAR MOVEMENTS | TC4P
www.francejoint.com Temperature / Media Media Maximum temperature depending on the materials ACM AEM EPDM FKM HNBR NBR VMQ Mineral oils Hydraulic oils +130°C +130°C – +170°C +130°C +100°C +150°C Greases – +130°C – – +100°C +90°C – Fire-resistant fluids HFA group - Emulsion with more than 80% water – – – – +70°C +70°C +60°C HFB group - Opposite solution (water in oil) – – – – +70°C +70°C +60°C HFC group - Polymer aqueous solution – – +60°C – +70°C +70°C – HFD group - Water-free synthetic fluids – – – +150°C – – – Other fluids EL + L heating oil – – – – +100°C +90°C – Water for washing – – +130°C +100°C +100°C +90°C – Temperature range || TECHNICAL DATA Speed / Pressure ratio We recommend using seals designed for linear movements at maximum speed of 1.5 m/sec and pressures that do not exceed 0.65 MPa. These approximate values cannot be interpreted at the same time. Rod diameter (mm) 0,2 m/s 0,5 m/s 1 m/s 1,5 m/s 40 80 120 160 2000 0,1 0,2 0,3 0,4 0,5 0,6 0,7 Max. pressure (MPa) ROTARY SEALS | SEALS FOR LINEAR MOVEMENTS | TC4P
|| DIMENSIONS Part number Shaft diameter Ød1 h11 Bore diameter ØD1 H8 Seal height Seal height TC4P 11 x 31 x 4 x 10 11.00 31.00 4.00 10.00 TC4P 11 x 33 x 4 x 7 11.00 33.00 4.00 7.00 TC4P 12 x 24 x 2 x 7 12.00 24.00 2.00 7.00 TC4P 12 x 35 x 5 x 10 12.00 35.00 5.00 10.00 TC4P 16 x 57 x 3 x 10 16.00 57.00 3.00 10.00 TC4P 20 x 32 x 2 x 7 20.00 32.00 2.00 7.00 TC4P 22 x 35 x 7 x 9 22.00 35.00 7.00 9.00 TC4P 22 x 38 x 4 x 10 22.00 38.00 4.00 10.00 TC4P 22 x 48 x 6 x 11 22.00 48.00 6.00 11.00 TC4P 25 x 37 x 2 x 7 25.00 37.00 2.00 7.00 TC4P 25 x 42 x 4 x 10 25.00 42.00 4.00 10.00 TC4P 25 x 50 x 7 x 11 25.00 50.00 7.00 11.00 TC4P 26 x 42 x 4 x 10 26.00 42.00 4.00 10.00 TC4P 28 x 53 x 7 x 11 28.00 53.00 7.00 11.00 ROTARY SEALS | SEALS FOR LINEAR MOVEMENTS | TC4P FRANCE JOINT SAS Zone Artisanale Le Mortier - B.P . 50009 - Cugand - 85613 Montaigu Cedex - France Ph. +33 (0)2 51 42 13 76 - Fax +33 (0)2 51 43 61 14 - Email: contact@francejoint.fr - Website: www.francejoint.com