TC4896-DA

TC4896-DA FOTEK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Operating Temp./Hum Vibration Resistance Panel Thickness K < CA > , J < IC > or PT-100 Relay< 5A / 250V AC >,V oltage < 20mA / 12V >,Linear < 4~20mA > P+D ON/OFF , ON/OFF or Proportion Appro 2.5% of F.S.

2 Sec or 20 Sec < ON+OFF >

Trimmer , Range 10 C or F Trimmer ( AL ) 0 ~ +50 , 0 ~ -50 or -50 ~ +50 of Setting Value Relay , 0.5A/250V AC Trimmer (HB) Relay , 0.5A/250V AC 110 / 220 V AC 20% 50 / 60Hz 2.5V A max. Over 50M /500 VDC Between Power And Another Terminal 1.0~8.0mm Over 2.5KV / 1min Between Power And Another Terminal 10~55Hz / 1.5mm , 2Hrs in X.Y .Z Direction Attachment CT provided with Heater Break Alarm type only. CT General Data AL Alarm Al HB Alarm Hb Electrical Data Mechanical Data 7 8 9 10 With Cold Junction Compensation, Suited to Operated at -20 C ~ +60 C All type with Sensor Break Alarm LED. With P+D Control to Control Temperature Easily. High Accuracy of Displaying & Setting Less than 0.5% of F.S. With Stand-by/Over-heat Alarm.( Optioned ). With Heater Break Alarm.( Optioned ). -20 C ~ +60 C P+D 0.5% ( ) ( ) Guiding of Model Product Range of Setting TC = Temperature Controller Digital Switch Trimmer Outline 0 = -99 ~ + 99 05 = -50 ~ +50 48 = 48(W) X 48(H) mm X mm 1 = 0 ~ +199 1 = 0 ~ +100 4896 = 48(W) X 96(H) mm X mm 3 = 0 ~ +399 2 = 0 ~ +200 72 = 72(W) X 72(H) mm X mm 5 = 0 ~ +599 4 = 0 ~ +400 96 = 96(W) X 96(H) mm X mm 9 = 0 ~ +999 6 = 0 ~ +600 Method of Setting 11 = 0 ~ +1199 12 = 0 ~ +1200 D = Digital Swith Unit of Degree A = Trimmer F = F Method of Display non = C A = Analog Deviation Meter Method of Control D = Digital LED Display S = ON/OFF N = Without Display non = P+D ON/OFF Type of Sensor Alarm PT = RTD PT-100 A = With Stand-by / Over Heat Alarm J = J Type Thermocouple AH = With Stand-by / Over Heat Alarm Non = K Type Thermocouple & Heater Break Alarm Method of Output Non = Without Alarm R = Relay (5A/250V AC) V = V oltage (20mA/12V) L = Linear (4~20mA) Ex. TC - 4896 D A - PT - R 3 - F - S - A 5.8 21.0 30.0 40.0 3.5 2 7.5 25.0 3.0 10.0

Operating Temp./Hum Vibration Resistance Panel Thickness K < CA > , J < IC > or PT-100 Relay< 5A / 250V AC >,V oltage < 20mA / 12V >,Linear < 4~20mA > P+D ON/OFF , ON/OFF or Proportion Appro 2.5% of F.S. Trimmer , Range 10 C or F Trimmer ( AL ) 0 ~ +50 , 0 ~ -50 or -50 ~ +50 of Setting Value Relay , 0.5A/250V AC Trimmer (HB) Relay , 0.5A/250V AC 110 / 220 V AC 20% 50 / 60Hz 2.5V A max. Over 50M /500 VDC Between Power And Another Terminal 1.0~8.0mm Over 2.5KV / 1min Between Power And Another Terminal 10~55Hz / 1.5mm , 2Hrs in X.Y .Z Direction Attachment CT provided with Heater Break Alarm type only. CT General Data AL Alarm Al HB Alarm Hb Electrical Data Mechanical Data 7 8 9 10 With Cold Junction Compensation, Suited to Operated at -20 C ~ +60 C All type with Sensor Break Alarm LED. With P+D Control to Control Temperature Easily. High Accuracy of Displaying & Setting Less than 0.5% of F.S. With Stand-by/Over-heat Alarm.( Optioned ). With Heater Break Alarm.( Optioned ). -20 C ~ +60 C P+D 0.5% ( ) ( ) Guiding of Model Product Range of Setting TC = Temperature Controller Digital Switch Trimmer Outline 0 = -99 ~ + 99 05 = -50 ~ +50 48 = 48(W) X 48(H) mm X mm 1 = 0 ~ +199 1 = 0 ~ +100 4896 = 48(W) X 96(H) mm X mm 3 = 0 ~ +399 2 = 0 ~ +200 72 = 72(W) X 72(H) mm X mm 5 = 0 ~ +599 4 = 0 ~ +400 96 = 96(W) X 96(H) mm X mm 9 = 0 ~ +999 6 = 0 ~ +600 Method of Setting 11 = 0 ~ +1199 12 = 0 ~ +1200 D = Digital Swith Unit of Degree A = Trimmer F = F Method of Display non = C A = Analog Deviation Meter Method of Control D = Digital LED Display S = ON/OFF N = Without Display non = P+D ON/OFF Type of Sensor Alarm PT = RTD PT-100 A = With Stand-by / Over Heat Alarm J = J Type Thermocouple AH = With Stand-by / Over Heat Alarm Non = K Type Thermocouple & Heater Break Alarm Method of Output Non = Without Alarm R = Relay (5A/250V AC) V = V oltage (20mA/12V) L = Linear (4~20mA) Ex. TC - 4896 D A - PT - R 3 - F - S - A 5.8 21.0 30.0 40.0 3.5 2 7.5 25.0 3.0 10.0

Dimension & Fixed Hole/ Outline Fixed Hole ( Thickness 1~8mm ) Single Cutout Multi Juxtaposed Cutout N 2 3 4 5 6 TC-4896-DA- - -A TC-4896-DA- - -AH AL Alarm AL+HB Analog Deviation Meter 1.0% of F.S. Digital Switch < 3 Digits > 0.5% of Setting Range DisplaySetting 44.5 91.5 48.0 96.0 9.0 7.0 100.0 L=48N-4.0 L 91.591.5 TC-72-DN- - DIN72 X 72 68.0 68.0 Model TC-72-DA- - -ATC-72-DA- - Outline Fixed Hole ( Thickness 1~8mm ) Model TC-72-AA- - -ATC-72-AA- -TC-72-AN- - Non Non AL Alarm DIN72 X 72 68.0 68.0 Non Non Non Analog Deviation Meter 1.0% of F.S. Trimmer < Variable Resister > 1.0% of Setting Range 0~100 , 0~200 , 0~400 , 0~600 , 0~1200 AL AlarmNonNon Analog Deviation Meter 1.0% of F.S. Non Non Non Digital Switch 0.5% of Setting Range Dimension & Fixed Hole/ Fixed hole 68.0 68.0 67.0 117.019.0 72.0 72.0 FOTEK TC-72-DA-A AL SB KC a03 9 9 MR ON/OFF DisplaySetting Outline Alarm Method Tolerance Range Method Tolerance Range DisplaySetting Outline Alarm Method Tolerance Range Method Tolerance Range 40 +- 44.5 40 +- 40 +-

ON/OFF LED Turn to Green Color , Control Output Turn ON. ON/OFF LED Turn to Red Color , Control Output Turn OFF . but , Linear Output Type That ON/OFF LED Turn to Green Color. ()Sensor Break Alarm SB SB LED Turn ON when Sensor Break. SB Stand-by/Over-heat Alarm (AL) SV = Setting Value A V1/A V2 = Stand-by/Over-heat Value DIP Switch to Select Function on Inner PC Board DIP Stand-by Alarm Over-heat Alarm Stand-by/ Over-heat Alarm Heater Break Alarm (HB) Heater Break Alarm Output Turns ON when the Current of Heater Lower than Setting V alue that may set at Front Panel. ( 0.5A~25A standard/1.0A~50A Optioned ) 0.5A~25A 1.0A~50A P+D ON/OFF SV SV ()ON/OFF S SV PV SV PV Process Value Proportion SV SV PV Process Value

ON/OFF LED Turn to Green Color , Control Output Turn ON. ON/OFF LED Turn to Red Color , Control Output Turn OFF . but , Linear Output Type That ON/OFF LED Turn to Green Color. ()Sensor Break Alarm SB SB LED Turn ON when Sensor Break. SB Stand-by/Over-heat Alarm (AL) SV = Setting Value A V1/A V2 = Stand-by/Over-heat Value DIP Switch to Select Function on Inner PC Board DIP Stand-by Alarm Over-heat Alarm Stand-by/ Over-heat Alarm Heater Break Alarm (HB) Heater Break Alarm Output Turns ON when the Current of Heater Lower than Setting V alue that may set at Front Panel. ( 0.5A~25A standard/1.0A~50A Optioned ) 0.5A~25A 1.0A~50A P+D ON/OFF SV SV ()ON/OFF S SV PV SV PV Process Value Proportion SV SV PV Process Value