TC4584BP_07 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

TOSHIBA CMOS Digital Integrated Ci rcuit Silicon Monolithic TC4584BP,TC4584BF,TC4584BFN TC4584B Hex Schmitt Trigger The TC4584B is the 6-circuit inverter having the Schmitt trigger function at the input terminal. That is, since the circuit threshold level voltages at the leading and trailing edges of input waveform are different (VP, VN), the TC4584B can be used in the broad range application including line receiver, waveform shaping circuit, astable multivibrator, monostable multivibrator, etc. In addition to ordinary inverter. Since the pins are compatible with the TC4069UB, the substitution is also possible. Pin Assignment Logic Diagram Input/Output Voltage Characteristic Note: xxxFN (JEDEC SOP) is not available in Japan. TC4584BP TC4584BF TC4584BFN Weight DIP14-P-300-2.54 : 0.96 g (typ.) SOP14-P-300-1.27A : 0.18 g (typ.) SOL14-P-150-1.27 : 0.12 g (typ.) Input-Output Voltage Waveform Transfer Characteristics

Absolute Maximum Ratings (Note) Characteristics Symbol Rating Unit DC supply voltage VDD V SS − 0.5~VSS + 20 V Input voltage VIN V SS − 0.5~VDD + 0.5 V Output voltage VOUT V SS − 0.5~VDD + 0.5 V DC input current IIN ±10 mA Power dissipation PD 300 (DIP)/180 (SOIC) mW Operating temperature range Topr −40~85 °C Storage temperature range Tstg −65~150 °C Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Operating Ranges (VSS = 0 V) (Note) Characteristics Symbol Test Condition Min Typ. Max Unit DC supply voltage VDD ⎯ 3 ⎯ 18 V Input voltage VIN ⎯ 0 ⎯ V DD V Note 1: The operating ranges must be maintai ned to ensure the normal operation of the device. Unused inputs must be tied to either VDD or VSS.

Static Electrical Characteristics (VSS = 0 V) Test Condition −40°C 25°C 85°C Characteristics Sym- bol VDD (V) Min Max Min Typ. Max Min Max Unit High-level output voltage VOH ⎪IOUT⎪ < 1 μA VIN = VSS, VDD 4.95 9.95 14.95 4.95 9.95 14.95 5.00 10.00 15.00 4.95 9.95 14.95 V Low-level output voltage VOL ⎪IOUT⎪ < 1 μA VIN = VSS, VDD 0.05 0.05 0.05 0.00 0.00 0.00 0.05 0.05 0.05 0.05 0.05 0.05 V VOH = 4.6 V VOH = 2.5 V VOH = 9.5 V VOH = 13.5 V −0.61 −2.50 −1.50 −4.00 −0.51 −2.10 −1.30 −3.40 −1.0 −4.0 −2.2 −9.0 −0.42 −1.70 −1.10 −2.80 Output high current I OH VIN = VSS mA VOL = 0.4 V VOL = 0.5 V VOL = 1.5 V 0.61 1.50 4.00 0.51 1.30 3.40 1.5 3.8 15.0 0.42 1.10 2.80 Output low current I OL VIN = VDD mA Positive trigger threshold voltage VP VOUT = 0.5 V VOUT = 1.0 V VOUT = 1.5 V 2.05 4.80 7.80 3.75 7.60 11.60 2.15 4.90 7.90 3.0 6.4 9.9 3.75 7.60 11.60 2.15 4.90 7.90 3.85 7.70 11.70 V Negative trigger threshold voltage VN VOUT = 4.5 V VOUT = 9.0 V VOUT = 13.5 V 1.25 2.40 3.40 2.95 5.20 7.20 1.25 2.40 3.40 2.3 3.8 5.2 2.85 5.10 7.10 1.15 2.30 3.30 2.85 5.10 7.10 V Hysteresis voltage V H ⎯ 0.10 1.80 3.70 1.25 3.50 5.60 0.25 1.90 3.80 0.65 2.60 4.70 1.25 3.50 5.60 0.25 1.90 3.80 1.40 3.60 5.70 V “H” level I IH V IH = 18 V 18 ⎯ 0.1 ⎯ 10 −5 0.1 ⎯ 1.0 Input current “L” level I IL V IL = 0 V 18 ⎯ −0.1 ⎯ −10−5 −0.1 ⎯ −1.0 μA Quiescent supply current I DD VIN = VSS, VDD (Note) 0.001 0.002 0.004 7.5 15.0 30.0 μA Note: All valid input combinations.

Dynamic Electrical Characteristics (Ta = 25°C, VSS = 0 V, CL = 50 pF) Test Condition Characteristics Symbol V DD (V) Min Typ. Max Unit Output transition time (low to high) tTLH ⎯ 200 100 ns Output transition time (high to low) t THL ⎯ 200 100 ns Propagation delay time tpLH tpHL 170 340 160 120 ns Input capacitance CIN ⎯ ⎯ 5 7.5 pF Circuit and Waveform for Measurement of Dynamic Characteristics Circuit Waveform

Weight: 0.96 g (typ.)

Weight: 0.18 g (typ.)

Package Dimensions (Note) Note: This package is not available in Japan. Weight: 0.12 g (typ.)

RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.