TC4420 MICROCHIP | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 22
Technical content
Features
- Latch-Up Protected: Will Withstand >1.5A Reverse Output Current
- Logic Input Will Withstand Negative Swing Up To
- ESD Protected: 4 kV
- Matched Rise and Fall Times: - 25 ns (2500 pF load)
- High Peak Output Current: 6A
- Wide Input Supply Voltage Operating Range: - 4.5V to 18V
- High Capacitive Load Drive Capability: 10,000 pF
- Short Delay Time: 55 ns (typ.)
- CMOS/TTL Compatible Input
- Low Supply Current With Logic ‘1’ Input: -4 5 0 µ A ( t y p . )
- Low Output Impedance: 2.5
- Output Voltage Swing to Within 25 mV of Ground or V DD
- Space-Saving 8-Pin SOIC and 8-Pin 6x5 DFN Packages
Applications
- Switch-Mode Power Supplies
- Motor Controls
- Pulse Transformer Driver
- Class D Switching Amplifiers General Description The TC4420/TC4429 are 6A (peak), single-output MOSFET drivers. The TC4429 is an inverting driver (pin-compatible with the TC429), while the TC4420 is a non-inverting driver. These drivers are fabricated in CMOS for lower power and more efficient operation versus bipolar drivers. Both devices have TTL/CMOS compatible inputs that can be driven as high as V DD + 0.3V or as low as –5V without upset or damage to the device. This eliminates the need for external level-shifting circuitry and its associated cost and size. The output swing is rail-to-rail, ensuring better drive voltage margin, especially during power-up/power-down sequencing. Propagational delay time is only 55 ns (typ.) and the output rise and fall times are only 25 ns (typ.) into 2500 pF across the usable power supply range. Unlike other drivers, the TC4420/TC4429 are virtually latch-up proof. They replace three or more discrete components, saving PCB area, parts and improving overall system reliability. Package Types(1) 5-Pin TO-220 VDD GND INPUT GND OUTPUT TC4420 TC4429 Tab is Common to VDD 8-Pin CERDIP/ VDD OUTPUT GND VDD INPUT NC GND OUTPUT TC4420 TC4429 TC4420 TC4429 VDD OUTPUT GND OUTPUT PDIP/SOIC Note 1: Duplicate pins must both be connected for proper operation. 2: Exposed pad of the DFN package is electrically isolated. 8-Pin DFN(2) VDD INPUT NC GND 4 5 TC4420 TC4429 VDD OUTPUT GND OUTPUT TC4420 TC4429 VDD OUTPUT GND OUTPUT 6A High-Speed MOSFET Drivers
DS21419D-page 2 2002-2012 Microchip Technology Inc. Functional Block Diagram Effective Input TC4420 Output Input GND VDD 300 mV 4.7V C = 38 pF TC4429 500 µA Non-Inverting Inverting
2002-2012 Microchip Technology Inc. DS21419D-page 3 TC4420/TC4429
1.0 ELECTRICAL
Absolute Maximum Ratings† Power Dissipation (TA 70°C) Package Power Dissipation (T A 25°C) Thermal Impedances (To Case) † Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operation sections of the spec ifications is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. DC CHARACTERISTICS Electrical Specifications: Unless otherwise noted, TA = +25°C with 4.5V VDD 18V. Parameters Sym Min Typ Max Units Conditions Input Logic ‘1’, High Input Voltage VIH 2.4 1.8 — V Logic ‘0’, Low Input Voltage V IL —1 . 3 0 . 8 V Input Voltage Range V IN –5 — V DD+0.3 V Input Current I IN –10 — +10 µA 0V VINVDD Output High Output Voltage V OH VDD – 0.025 — — V DC TEST Low Output Voltage V OL — — 0.025 V DC TEST Output Resistance, High R OH —2 . 1 2 . 8 IOUT = 10 mA, VDD = 18V Output Resistance, Low R OL —1 . 5 2 . 5 IOUT = 10 mA, VDD = 18V Peak Output Current I PK —6 . 0 — A V DD = 18V Latch-Up Protection Withstand Reverse Current Switching Time (Note 1) Rise Time t R —2 5 3 5 n s Figure 4-1, CL = 2,500 pF Fall Time t F —2 5 3 5 n s Figure 4-1, CL = 2,500 pF Delay Time t D1 —5 5 7 5 n s Figure 4-1 Delay Time t D2 —5 5 7 5 n s Figure 4-1 Power Supply Power Supply Current I S — 0.45 1.5 150 mA µA VIN = 3V VIN = 0V Operating Input Voltage V DD 4.5 — 18 V Note 1: Switching times ensured by design. 2: Package power dissipation is dependent on the copper pad area on the PCB.
DS21419D-page 4 2002-2012 Microchip Technology Inc. DC CHARACTERISTICS (OVER OPERATING TEMPERATURE RANGE) TEMPERATURE CHARACTERISTICS Electrical Specifications: Unless otherwise noted, over operating temperature range with 4.5V VDD 18V. Parameters Sym Min Typ Max Units Conditions Input Logic ‘1’, High Input Voltage VIH 2.4 — — V Logic ‘0’, Low Input Voltage V IL —— 0 . 8 V Input Voltage Range V IN –5 — V DD + 0.3 V Input Current I IN –10 — +10 µA 0V VINVDD Output High Output Voltage V OH VDD – 0.025 — — V DC TEST Low Output Voltage V OL — — 0.025 V DC TEST Output Resistance, High R OH —3 5 IOUT = 10 mA, VDD = 18V Output Resistance, Low R OL —2 . 3 5 IOUT = 10 mA, VDD = 18V Switching Time (Note 1) Rise Time t R —3 2 6 0 n s Figure 4-1, CL = 2,500 pF Fall Time t F —3 4 6 0 n s Figure 4-1, CL = 2,500 pF Delay Time t D1 —5 0 1 0 0 n s Figure 4-1 Delay Time t D2 —6 5 1 0 0 n s Figure 4-1 Power Supply Power Supply Current I S — 0.45 400 mA µA VIN = 3V VIN = 0V Operating Input Voltage V DD 4.5 — 18 V Note 1: Switching times ensured by design. Electrical Specifications: Unless otherwise noted, all parameters apply with 4.5V VDD 18V. Parameters Sym Min Typ Max Units Conditions Temperature Ranges Specified Temperature Range (C) T A 0— + 7 0 ° C Specified Temperature Range (I) T A –25 — +85 °C Specified Temperature Range (E) T A –40 — +85 °C Specified Temperature Range (V) T A –40 — +125 °C Maximum Junction Temperature T J — — +150 °C Storage Temperature Range T A –65 — +150 °C Package Thermal Resistances Thermal Resistance, 5L-TO-220 JA —7 1— ° C / W Thermal Resistance, 8L-CERDIP JA —1 5 0— ° C / W Thermal Resistance, 8L-6x5 DFN JA — 33.2 — °C/W Typical four-layer board with vias to ground plane. Thermal Resistance, 8L-PDIP JA —1 2 5— ° C / W Thermal Resistance, 8L-SOIC JA —1 5 5— ° C / W
2002-2012 Microchip Technology Inc. DS21419D-page 5 TC4420/TC4429
2.0 TYPICAL PERFORMANCE CURVES
Note: Unless otherwise indicated, TA = +25°C with 4.5V VDD 18V. FIGURE 2-1: Rise Time vs. Supply Voltage. FIGURE 2-2: Rise Time vs. Capacitive Load. FIGURE 2-3: Propagation Delay Time vs. Temperature. FIGURE 2-4: Fall Time vs. Supply Voltage. FIGURE 2-5: Fall Time vs. Capacitive Load. FIGURE 2-6: Supply Current vs. Capacitive Load. Note: The graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. The performance characteristics listed herein are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. 57 9 1 1 1 3 1 5 Supply Voltage (V) C = 2200 pFL 120 100 Time (nsec) C = 4700 pFL C = 10,000 pFL V = 12VDD V = 5VDD 1000 10,000 Capcitive Load (pF) V = 18VDD 100Time (nsec) –60 –20 20 60 100 140 TA (°C) Delay Time (nsec) D1t D2t C = 2200 pFL V = 18VDD 57 9 1 1 1 3 1 5 Supply Voltage (V) C = 2200 pFL Time (nsec) C = 4700 pFL C = 10,000 pFL 100 1000 10,000 Capacitive Load (pF) Time (nsec) V = 18VDD 100 V = 12VDD V = 5VDD 0 100 1000 10,000 Capacitive Load (pF) Supply Current (mA) 500 kHz 200 kHz 20 kHz V = 15VDD
DS21419D-page 6 2002-2012 Microchip Technology Inc. Note: Unless otherwise indicated, TA = +25°C with 4.5V VDD 18V. FIGURE 2-7: Rise and Fall Times vs. Temperature. FIGURE 2-8: Propagation Delay Time vs. Supply Voltage. FIGURE 2-9: Supply Current vs. Frequency. FIGURE 2-10: High-State Output Resistance vs Supply Voltage. FIGURE 2-11: Effect of Input Amplitude on Propagation Delay. FIGURE 2-12: Low-State Output Resistance vs. Supply Voltage. –60 –20 20 60 100 140 TA (°C) t RISEt Time (nsec) C = 2200 pF V = 18VDD FALL L
35 Delay Time (nsec)
Supply Voltage (V) tD2 tD1 100 0 100 1000 10,000 Frequency (kHz) Supply Current (mA) 1000 18V 10V C = 2200 pFL 59 1 3 Supply Voltage (V) R ( )ΩOUT 100 mA 50 mA10 mA 71 1 1 5 200 160 120 Delay Time (nsec) 567 1 1 1 3 15 Load = 2200 pF Input 2.4V Input 3V Input 5V Input 8V and 10V 8 9 10 12 14 V (V)DD 2.5 1.5 59 1 3 Supply Voltage (V) R ( )ΩOUT 100 mA 50 mA 10 mA 71 1 1 5
2002-2012 Microchip Technology Inc. DS21419D-page 7 TC4420/TC4429 Note: Unless otherwise indicated, TA = +25°C with 4.5V VDD 18V. FIGURE 2-13: Crossover Energy. Crossover Area (AS) x 10-8 567 1 1 1 3 158 9 10 12 14 Supply Voltage (V) The values on this graph represent the loss seen by the driver during one complete cycle. For a single transition, divide the value by 2.
DS21419D-page 8 2002-2012 Microchip Technology Inc.
3.0 PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 3-1. TABLE 3-1: PIN FUNCTION TABLE
3.1 Supply Input (V DD)
The VDD input is the bias supply for the MOSFET driver and is rated for 4.5V to 18V with respect to the ground pins. The VDD input should be bypassed to ground with a local ceramic capacitor. The value of the capacitor should be chosen based on the capacitive load that is being driven. A minimum value of 1.0 µF is suggested.
3.2 Control Input
The MOSFET driver input is a high-impedance, TTL/CMOS compatible input. The input circuitry of the TC4420/TC4429 MOSFET driver also has a “speed- up” capacitor. This helps to decrease the propagation delay times of the driver. Because of this, input signals with slow rising or falling edges should not be used, as this can result in double-pulsing of the MOSFET driver output.
3.3 CMOS Push-Pull Output
The MOSFET driver output is a low-impedance, CMOS, push-pull style output capable of driving a capacitive load with 6.0A peak currents. The MOSFET driver output is capable of withstanding 1.5A peak reverse currents of either polarity.
3.4 Ground
The ground pins are the return path for the bias current and the high peak currents that discharge the load capacitor. The ground pins should be tied into a ground plane or have very short traces to the bias supply source return.
3.5 Exposed Metal Pad
The exposed metal pad of the 6x5 DFN package is not internally connected to any potential. Therefore, this pad can be connected to a ground plane or other copper plane on a printed circuit board (PCB) to aid in heat removal from the package. Pin No. 8-Pin CERDIP/ PDIP/SOIC Pin No. 8-Pin DFN Pin No. 5-Pin TO-220 Symbol Description 11 —V DD Supply input, 4.5V to 18V 2 2 1 INPUT Control input, TTL/CMOS compatible input 3 3 — NC No Connection 4 4 2 GND Ground 5 5 4 GND Ground 6 6 5 OUTPUT CMOS push-pull output 7 7 — OUTPUT CMOS push-pull output 88 3V DD Supply input, 4.5V to 18V —P A D — N C E x p o s e d M e t a l P a d —— T A BV DD Metal Tab is at the VDD Potential
2002-2012 Microchip Technology Inc. DS21419D-page 9 TC4420/TC4429
4.0 APPLICATIONS INFORMATION
FIGURE 4-1: Switching Time Test Circuits. Inverting Driver Non-Inverting Driver Input tD1 tF tR tD2 Input: 100 kHz, square wave, tRISE = tFALL 10 ns Output Input Output tD1 tF tR tD2 +5V 10% 90% 10% 90% 10% 90%+18V 90% 10% 10% 10% 90% +5V +18V 90% CL = 2,500 pF 0.1 µF 4.7 µF Input VDD = 18V Output 0.1 µF Note: Pinout shown is for the PDIP , SOIC, DFN and CERDIP packages. TC4429 TC4420
DS21419D-page 10 2002-2012 Microchip Technology Inc.
5.0 PACKAGING INFORMATION
5.1 Package Marking Information
Example: TC4420CAT 0419256 8-Lead CERDIP (300 mil) Example: XXXXXXXX XXXXXNNN YYWW TC4420 MJA256 0419 8-Lead DFN Example: XXXXXXX XXXXXXX XXYYWW NNN TC4420 EMF 0419 256 Legend: XX...X Customer-specific information Y Year code (last digit of calendar year) YY Year code (last 2 digits of calendar year) WW Week code (week of January 1 is week ‘01’) NNN Alphanumeric traceability code Pb-free JEDEC designator for Matte Tin (Sn) * This package is Pb-free. The Pb-free JEDEC designator ( ) can be found on the outer packaging for this package. Note: In the event the full Microchip part number cannot be marked on one line, it will be carried over to the next line, thus limiting the number of available characters for customer-specific information.
2002-2012 Microchip Technology Inc. DS21419D-page 11 TC4420/TC4429 Package Marking Information (Continued) XXXXXXXX XXXXXNNN YYWW 8-Lead PDIP (300 mil) Example: TC4420 CPA256 0419 8-Lead SOIC (150 mil) Example: XXXXXXXX XXXXYYWW NNN TC4420 EOA0419 256
DS21419D-page 12 2002-2012 Microchip Technology Inc. 5-Lead Plastic Transistor Outline (AT) (TO-220) L H1 Q E b e F A D a (5X) ØPEJECTOR PIN Drawing No. C04-036 Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010" (0.254mm) per side. JEDEC equivalent: TO-220 *Controlling Parameter Mold Draft Angle Lead Width Lead Thickness a b .014 Dimension Limits Overall Height Lead Length Overall Width Lead Pitch A L E .540 MIN e Units .060 INCHES* .022 0.36 0.56 MILLIMETERS .190 .560 13.72 MINMAX 4.83 14.22 MAX .160 4.06 3° 7° 3° 7° Overall Length D 1.020.64.040.025 Overall Lead Centers e1 .263 .385 .560 .273 6.68 6.93 .072 1.52 1.83 .415 9.78 10.54 .590 14.22 14.99 Through Hole Diameter P .146 .156 3.71 3.96 J1Base to Bottom of Lead .090 2.29 .115 2.92 Through Hole Center Q .103 2.87 .113 2.62 Flag Thickness F .045 1.40 .055 1.14 Flag Length H1 .234 6.55 .258 5.94 Space Between Leads e3 .030 1.02 .040 0.76 Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
2002-2012 Microchip Technology Inc. DS21419D-page 13 TC4420/TC4429 8-Lead Ceramic Dual In-line – 300 mil (JA) (CERDIP) 2.54.100pPitch 88nNumber of Pins MAXNOMMINMAXNOMMINDimension Limits MILLIMETERSINCHES*Units JEDEC Equivalent: MS-030 Drawing No. C04-010 *Controlling Parameter D n c eB E p L B A Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
DS21419D-page 14 2002-2012 Microchip Technology Inc. 8-Lead Plastic Dual Flat No Lead Package (MF) 6x5 mm Body (DFN-S) – Saw Singulated Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
2002-2012 Microchip Technology Inc. DS21419D-page 15 TC4420/TC4429 8-Lead Plastic Dual In-line (PA) – 300 mil (PDIP) B A L p E eB c n D Units INCHES* MILLIMETERS Dimension Limits MIN NOM MAX MIN NOM MAX Number of Pins n 88 Pitch p .100 2.54 Base to Seating Plane A1 .015 0.38 Mold Draft Angle Top 51 01 5 51 01 5 Mold Draft Angle Bottom 51 01 5 51 01 5 * Controlling Parameter Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed JEDEC Equivalent: MS-001 Drawing No. C04-018 .010” (0.254mm) per side. § Significant Characteristic Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
DS21419D-page 16 2002-2012 Microchip Technology Inc. 8-Lead Plastic Small Outline (OA) – Narrow, 150 mil (SOIC) Foot Angle 048048 1512015120Mold Draft Angle Bottom 1512015120Mold Draft Angle Top 1.27.050pPitch 88nNumber of Pins MAXNOMMINMAXNOMMINDimension Limits MILLIMETERSINCHES*Units D n p B E h c 45 A * Controlling Parameter Notes: Dimensions D and E1 do not include mold flash or protrusions. Mold flash or protrusions shall not exceed .010” (0.254mm) per side. JEDEC Equivalent: MS-012 Drawing No. C04-057 § Significant Characteristic Note: For the most current package drawings, please see the Microchip Packaging Specification located at http://www.microchip.com/packaging
2002-2012 Microchip Technology Inc. DS21419D-page 17 TC4420/TC4429
6.0 REVISION HISTORY
Revision D (December 2012) Added a note to each package outline drawing.
DS21419D-page 18 2002-2012 Microchip Technology Inc. NOTES:
2002-2012 Microchip Technology Inc. DS21419D-page 19 TC4420/TC4429 PRODUCT IDENTIFICATION SYSTEM To order or obtain information, e.g., on pricing or delivery, refer to the factory or the listed sales office . Sales and Support Device: TC4420: 6A High-Speed MOSFET Driver, Non-Inverting TC4429: 6A High-Speed MOSFET Driver, Inverting Temperature Range: C = 0°C to +70°C (PDIP, SOIC, and TO-220 Only) I = -25°C to +85°C (CERDIP Only) E = -40°C to +85°C V = -40°C to +125°C Package: AT = TO-220, 5-lead (C-Temp Only) JA = Ceramic Dual In-line (300 mil Body), 8-lead (I-Temp Only) MF = Dual, Flat, No-Lead (6X5 mm Body), 8-lead MF713 = Dual, Flat, No-Lead (6X5 mm Body), 8-lead (Tape and Reel) PA = Plastic DIP (300 mil Body), 8-lead OA = Plastic SOIC, (150 mil Body), 8-lead OA713 = Plastic SOIC, (150 mil Body), 8-lead (Tape and Reel) PB Free G = Lead-Free device * = Blank * Available on selected packages. Contact your local sales representative for availability PART NO. X XX PackageTemperature Range Device Examples: a) TC4420CAT: 6A High-Speed MOSFET Driver, Non-inverting, TO-220 package, 0°C to +70°C. b) TC4420EOA: 6A High-Speed MOSFET Driver, Non-inverting, SOIC package, -40°C to +85°C. c) TC4420VMF: 6A High-Speed MOSFET Driver, Non-inverting, DFN package, -40°C to +125°C. a) TC4429CAT: 6A High-Speed MOSFET Driver, Inverting, TO-220 package, 0°C to +70°C b) TC4429EPA: 6A High-Speed MOSFET Driver, Inverting, PDIP package, -40°C to +85°C c) TC4429VMF: 6A High-Speed MOSFET Driver, Inverting, DFN package, -40°C to +125°C XXX Tape and Reel X PB Free Data Sheets Products supported by a preliminary Data Sheet may have an errata sheet describing minor operational differences and recommended workarounds. To determine if an errata sheet exists for a particular device, please contact one of the following: 1. Your local Microchip sales office 2. The Microchip Worldwide Site (www.microchip.com) Please specify which device, revision of silicon and Data Sheet (include Literature #) you are using. Customer Notification System Register on our web site (www.microchip.com/cn) to receive the most current information on our products.
DS21419D-page 20 2002-2012 Microchip Technology Inc. NOTES:
2002-2012 Microchip Technology Inc. DS21419D-page 21 Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY , PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE . Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, FlashFlex, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC, SST, SST Logo, SuperFlash and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MTP, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Silicon Storage Technology is a registered trademark of Microchip Technology Inc. in other countries. Analog-for-the-Digital Age, Application Maestro, BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, SQI, Serial Quad I/O, Total Endurance, TSHARC, UniWinDriver, WiperLock, ZENA and Z-Scale are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. GestIC and ULPP are registered trademarks of Microchip Technology Germany II GmbH & Co. & KG, a subsidiary of Microchip Technology Inc., in other countries. All other trademarks mentioned herein are property of their respective companies. © 2002-2012, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 9781620767948 Note the following details of the code protection feature on Microchip devices:
- Microchip products meet the specification cont ained in their particular Microchip Data Sheet.
- Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used i n the intended manner and under normal conditions.
- There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
- Microchip is willing to work with the customer who is concerned about the integrity of their code.
- Neither Microchip nor any other semiconduc tor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are co mmitted to continuously improvin g the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. QUALITY MANAGEMENT S YSTEM CERTIFIED BY DNV == ISO/TS 16949 ==
DS21419D-page 22 2002-2012 Microchip Technology Inc. AMERICAS Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 ASIA/PACIFIC Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 China - Hangzhou Tel: 86-571-2819-3187 Fax: 86-571-2819-3189 China - Hong Kong SAR Tel: 852-2943-5100 Fax: 852-2401-3431 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 China - Shenzhen Tel: 86-755-8864-2200 Fax: 86-755-8203-1760 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 ASIA/PACIFIC India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 Japan - Osaka Tel: 81-66-152-7160 Fax: 81-66-152-9310 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 Taiwan - Kaohsiung Tel: 886-7-213-7828 Fax: 886-7-330-9305 Taiwan - Taipei Tel: 886-2-2508-8600 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 EUROPE Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 Worldwide Sales and Service 11/27/12