TC20-11SYKWA KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
z 2.0 inch matrix height. z Dot size 5mm. z Low current operation. z High contrast and light output. z Stackable horizontally. z Easy mounting on P.C. boards or sockets. z Categorized for luminous intensity. z Mechanically rugged. z Standard : gray face, white dot. z RoHS compliant.
Description
The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAM8453 REV NO: V.2A DATE: APR/06/2015 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1332000603 Selection Guide Note: 1. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. 4. Excess driving current and/or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Description Min. Typ. Super Bright Yellow (AlGaInP) White Diffused 88000 160000 Column Cathode *21000 *51000 TC20-11SYKWA Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength Super Bright Yellow 590 nm I F=20mA λD [1] Dominant Wavelength Super Bright Yellow 590 nm I F=20mA Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm I F=20mA C Capacitance Super Bright Yellow 20 pF V F=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V I F=20mA IR Reverse Current Super Bright Yellow 10 uA V R=5V Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAM8453 REV NO: V.2A DATE: APR/06/2015 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1332000603 Super Bright Yellow TC20-11SYKWA
SPEC NO: DSAM8453 REV NO: V.2A DATE: APR/06/2015 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1332000603 PACKING & LABEL SPECIFICATIONS TC20-11SYKWA Terms and conditions for the usage of this document 1. The information included in this docum ent reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the dat asheet. If customer usage exceeds the spec ified limits, Kingbright will not be respon sible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applicati ons. If customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
SPEC NO: DSAM8453 REV NO: V.2A DATE: APR/06/2015 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1332000603
SPEC NO: DSAM8453 REV NO: V.2A DATE: APR/06/2015 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: L.Q.Xie ERP: 1332000603