TC100 ALLIED | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Pre-tinned Copper Leads
- Vertical and Horizontal Mounting
- Low Cost Construction
- Varnished Windings Typical Applications Include:
- Switching Power Supplies
- Hash Choke Applications
- EMI/RFI FilteringAnalyzer HP-4291A. Electrical Inductance: Measured at 1KHz, 0.01V. Rated current may decrease inductance by no more than 10%. Tolerance: Inductance Tolerance is 20% over the entire range of inductance values. Tighter tolerances available. Current Rating: Continuous operation at room temperature will not decrease inductance by more than 10%. 90% terminal coverage. Solder: H63A. Solder Available Options Include:
- Tighter Tolerances
- Custom Inductance Values
- Custom Current Ratings
- Custom P.C. Mounts, Including Surface Mounts Analyzer HP-4291A. ( )TC100- 1R0M-RC ( )TC100- 1R2M-RC ( )TC100- 1R5M-RC ( )TC100- 1R8M-RC ( )TC100- 2R2M-RC ( )TC100- 2R7M-RC ( )TC100- 3R3M-RC ( )TC100- 3R9M-RC ( )TC100- 4R7M-RC ( )TC100- 5R6M-RC ( )TC100- 6R8M-RC ( )TC100- 8R2M-RC ( )TC100- 100M-RC ( )TC100- 120M-RC ( )TC100- 150M-RC ( )TC100- 180M-RC ( )TC100- 220M-RC ( )TC100- 270M-RC ( )TC100- 330M-RC ( )TC100- 390M-RC ( )TC100- 470M-RC ( )TC100- 560M-RC ( )TC100- 680M-RC ( )TC100- 820M-RC ( )TC100- 101M-RC ( )TC100- 121M-RC ( )TC100- 151M-RC ( )TC100- 181M-RC ( )TC100- 221M-RC ( )TC100- 271M-RC ( )TC100- 331M-RC ( )TC100- 391M-RC ( )TC100- 471M-RC ( )TC100- 561M-RC ( )TC100- 681M-RC ( )TC100- 821M-RC ( )TC100- 102M-RC Lead Length (Nom) Allied Part Number Inductance (µh) DCR Max (Ω) I MAX (Amps) ID (Nom) W/H (Nom) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 100 120 150 180 220 270 330 390 470 560 680 820 1000 4.5 4.5 4.5 4.5 4.0 4.0 3.5 3.5 3.5 2.5 2.5 2.5 2.5 2.0 1.7 1.7 1.5 1.5 1.5 1.0 1.0 .262 .262 .262 .262 .262 .262 .262 .262 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .28 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 .24 Please sp ecify Vertical or Hor izontal Mount by placing a V or H at the beginning o f the part number, i.e. VTC100- 1R0M (Vertical Mount). A ll specificat ions subject to change without notice. OD (Nom) .004 .004 .005 .005 .007 .007 .008 .009 .01 .011 .012 .013 .014 .018 .02 .025 .029 .035 .04 .06 .095 .120 .125 .200 .250 .31 .42 .49 .59 .64 .66 .74 .88 .99 1.1 1.3 1.6 .25 .25 .25 .25 .25 .25 .25 .25 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .22 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .23 .58 .58 .58 .58 .58 .58 .58 .58 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .60 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 .56 Tolerance (%) W O.D. I.D. Lead Length Vertical Mount H Horizontal Mount Toroidal Chokes TC100 ALLIED COMPONENTS INTERNATIONAL714-665-1 140 www.a lliedcom ponen ts.com RoHS REVISED 7/20/09