TBU-CAxxx-050-WH

TBU-CA BOURNS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

n Superior circuit protection n Overcurrent and overvoltage protection n Blocks surges up to rated limits n High-speed performance n Small SMT package n Agency listing:

Applications

n Protection modules and dongles n Process control equipment n Test and measurement equipment n General electronics TBU-CA Series - TBU® High-Speed Protectors *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. General Information The TBU-CA Series of Bourns® TBU® products are low capacitance single bidirectional high-speed protection components, constructed using MOSFET semiconductor technology, and designed to protect against faults caused by short circuits, AC power cross, induction and lightning surges. The TBU® high-speed protector placed in the system circuit will monitor the current with the MOSFET detection circuit triggering to provide an effective barrier behind which sensitive electronics will not be exposed to large voltages or currents during surge events. The TBU ® device is provided in a surface mount DFN package and meets industry standard requirements such as RoHS and Pb Free solder reflow profiles. Agency Listing

Description

UL File Number: E315805 Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Symbol Parameter Part Number Value Unit Vimp Peak impulse voltage withstand with duration less than 10 ms TBU-CA025-xxx-WH TBU-CA040-xxx-WH TBU-CA050-xxx-WH TBU-CA065-xxx-WH TBU-CA085-xxx-WH 250 400 500 650 850 V V rms Continuous A.C. RMS voltage TBU-CA025-xxx-WH TBU-CA040-xxx-WH TBU-CA050-xxx-WH TBU-CA065-xxx-WH TBU-CA085-xxx-WH 100 200 250 300 425 V T op Operating temperature range -55 to +125 °C Tstg Storage temperature range -65 to +150 °C Tjmax Maximum Junction Temperature +125 °C ESD HBM ESD protection per IEC 61000-4-2 ±2 kV TBU® Device Line In/ Line Out Line Out/ Line In *RoHS COMPLIANT LEAD FREE *RoHS COMPLIANTVERSIONS AVAILABLE LEAD FREE VERSIONS ARE RoHS COMPLIANT* Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com

TBU-CA Series - TBU® High-Speed Protectors Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Symbol Parameter Part Number Min. Typ. Max. Unit Itrigger Current required for the device to go from operating state to protected state TBU-CAxxx-050-WH TBU-CAxxx-100-WH TBU-CAxxx-200-WH TBU-CAxxx-300-WH TBU-CAxxx-500-WH 100 200 300 500 150 300 450 750 100 200 400 600 1000 mA R device Series resistance of the TBU device V imp = 250 V Itrigger (min.) = 50 mA Vimp = 250 V Itrigger (min.) = 100 mA Vimp = 250 V Itrigger (min.) = 200 mA Vimp = 250 V Itrigger (min.) = 300 mA Vimp = 250 V Itrigger (min.) = 500 mA Vimp = 400 V Itrigger (min.) = 50 mA Vimp = 400 V Itrigger (min.) = 100 mA Vimp = 400 V Itrigger (min.) = 200 mA Vimp = 400 V Itrigger (min.) = 300 mA Vimp = 400 V Itrigger (min.) = 500 mA Vimp = 500 V Itrigger (min.) = 50 mA Vimp = 500 V Itrigger (min.) = 100 mA Vimp = 500 V Itrigger (min.) = 200 mA Vimp = 500 V Itrigger (min.) = 300 mA Vimp = 500 V Itrigger (min.) = 500 mA Vimp = 650 V Itrigger (min.) = 50 mA Vimp = 650 V Itrigger (min.) = 100 mA Vimp = 650 V Itrigger (min.) = 200 mA Vimp = 650 V Itrigger (min.) = 300 mA Vimp = 650 V Itrigger (min.) = 500 mA Vimp = 850 V Itrigger (min.) = 50 mA Vimp = 850 V Itrigger (min.) = 100 mA Vimp = 850 V Itrigger (min.) = 200 mA Vimp = 850 V Itrigger (min.) = 300 mA Vimp = 850 V Itrigger (min.) = 500 mA TBU-CA025-050-WH TBU-CA025-100-WH TBU-CA025-200-WH TBU-CA025-300-WH TBU-CA025-500-WH TBU-CA040-050-WH TBU-CA040-100-WH TBU-CA040-200-WH TBU-CA040-300-WH TBU-CA040-500-WH TBU-CA050-050-WH TBU-CA050-100-WH TBU-CA050-200-WH TBU-CA050-300-WH TBU-CA050-500-WH TBU-CA065-050-WH TBU-CA065-100-WH TBU-CA065-200-WH TBU-CA065-300-WH TBU-CA065-500-WH TBU-CA085-050-WH TBU-CA085-100-WH TBU-CA085-200-WH TBU-CA085-300-WH TBU-CA085-500-WH 13.3 7.1 4.2 3.2 2.6 14.3 8.1 5.2 4.3 3.6 15.7 9.5 6.6 5.6 5.0 17.7 11.5 8.6 7.6 7.0 21.4 15.2 12.3 11.3 10.7 15.3 8.2 4.8 3.8 3.0 16.5 9.4 6.0 5.0 4.2 18.0 10.9 7.5 6.5 5.7 20.3 13.2 9.8 8.8 8.0 24.5 17.4 14.0 13.0 12.2 Ω t block Time for the device to go from normal operating state to protected state 1 µs IQ Current through the triggered TBU® device with 50 Vdc circuit voltage 0.25 0.50 1.00 mA Vreset Voltage below which the triggered TBU® device will transition to normal operating state 12 16 20 V Rth(j-l) Junction to package pads - FR4 using recommended pad layout 98 °C/W Rth(j-l) Junction to package pads - FR4 using heat sink on board (6 cm2) (1 in2) 40 °C/W Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -75 -50 -25 02 55 07 5 100 125 150 Junction Temperature (°C) Normalized Trip Current 2.2 1.6 1.8 2.0 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -75 -50 -25 02 55 07 5 100 125 150 Junction Temperature (°C) Normalized Resistance TBU-CA Series - TBU® High-Speed Protectors Reference Application The TBU® devices are general use protectors used in a wide variety of applications. The maximum voltage rating of the TBU® device should never be exceeded. Where necessary, an OVP should be employed to limit the maximum voltage. A cost- effective protection solution combines Bourns® TBU® protection devices with a pair of Bourns® MOVs. For bandwidth sensitive applications, a Bourns® GDT may be substituted for the MOV. The TBU® device, constructed using MOSFET semiconductor technology, placed in the system circuit will monitor the current with the MOSFET detection circuit triggering to provide an effective barrier behind which sensitive electronics are not exposed to large voltages or currents during surge events. The TBU® device operates in approximately 1 μs - once line current exceeds the TBU® device’s trigger current Itrigger. When operat- ed, the TBU® device will limit the current to less than the Itrigger value within the tblock duration. If voltage above Vreset is contin- uously sustained, the TBU® device will subsequently reduce the current to a quiescent current level within a period of time that is dependent upon the applied voltage. After the surge, the TBU® device resets when the voltage across the TBU® device falls to the Vreset level. The TBU® device will automatically reset on lines which have no DC bias or have DC bias below Vreset (such as unpowered signal lines). If the line has a normal DC bias above Vreset, the voltage across the TBU® device may not fall below Vreset after the surge. In such cases, special care needs to be taken to ensure that the TBU ® device will reset, with software monitoring as one method used to accomplish this. Bourns application engineers can provide further assistance. Basic TBU Operation Performance Graphs Typical V-I Characteristics (TBU-CA050-300-WH) Typical Trigger Current vs. Temperature Equip. OVP OVP Line Line TBU® Device TBU® Device Line In / Line Out Line Out / Line In Line Out / Line In Line In / Line Out Typical Resistance vs. TemperaturePower Derating Curve CURRENT (100 mA/div) VOLTAGE (5 V/div) ITRIP VRESET No Additional PCB Cu 0.5 sq. in. Additional PCB Cu Junction Temperature (°C) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 40 60 80 100 120 140 Total Max. Power (W) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -75 -50 -25 02 55 07 5 100 125 150 Junction Temperature (°C) Normalized Trip Current 2.2 1.6 1.8 2.0 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -75 -50 -25 02 55 07 5 100 125 150 Junction Temperature (°C) Normalized Resistance

TBU-CA Series - TBU® High-Speed Protectors Product Dimensions DIMENSIONS: MM (INCHES) Recommended Pad Layout TBU® High-Speed Protectors have a 100 % matte-tin termination finish. For improved thermal dissipation, the recommended layout uses PCB copper areas which extend beyond the exposed solder pad. The exposed solder pads should be defined by a solder mask which matches the pad layout of the TBU ® device in size and spac- ing. It is recommended that they should be the same dimension as the TBU ® pads but if smaller solder pads are used, they should be centered on the TBU® package terminal pads and not more than Solder pad areas should not be larger than the TBU ® pad sizes to ensure adequate clearance is maintained. The recommended opening size 0.025 mm (0.0010 in.) less than the solder pad size. Extended copper areas beyond the solder pad significantly improve the junction to ambient thermal resistance, resulting in operation at lower junction temperatures with a corresponding benefit of reli- ability. All pads should soldered to the PCB, including pads marked as NC or NU but no electrical connection should be made to these pads. For minimum parasitic capacitance, it is recommended that signal, ground or power signals are not routed beneath any pad. PIN 1 & BACKSIDE CHAMFER 4.00 ± 0.10 (.157 ± .004) 0.00 - 0.05 (.000 - .002) 6.50 ± 0.10 (.256 ± .004) 0.30 (.012) 3.40 (.134) 0.30 (.012) 1.85 (.073) 0.70 (.028) 0.70 (.028) 0.80 (.031)1.85 (.073) C PIN 10.25 (.010) 3.55 (.140) 0.70 (.028) 0.80 (.031) 1.85 (.073) 1.85 (.073) 3.55 (.140) 3 2 1 A = A1 =SEATING PLANE 0.80 - 1.00 (.031 - .039) XXXXX YWWLL PIN 1 & BACKSIDE CHAMFER 4.00 ± 0.10 (.157 ± .004) 0.00 - 0.05 (.000 - .002) 6.50 ± 0.10 (.256 ± .004) 0.30 (.012) 3.40 (.134) 0.30 (.012) 1.85 (.073) 0.70 (.028) 0.70 (.028) 0.80 (.031)1.85 (.073) C PIN 10.25 (.010) 3.55 (.140) 0.70 (.028) 0.80 (.031) 1.85 (.073) 1.85 (.073) 3.55 (.140) 3 2 1 A = A1 =SEATING PLANE 0.80 - 1.00 (.031 - .039) XXXXX YWWLL Pad # Pin Out

1 Line In/Out

3 Line Out/In

Dark grey areas show added PCB copper area for better thermal resistance. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

TBU-CA Series - TBU® High-Speed Protectors Reflow Profile 32 1 3.55 (.140) 0.70 (.028) 1.15 (.045) 2.625 (.103) PIN 1 TOP VIEW SIDE VIEW BOTTOM VIEW A D BE C JJ N N H E K K F Profile Feature Pb-Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3 °C/sec. max. Preheat - Temperature Min. (Tsmin) - Temperature Max. (Tsmax) - Time (tsmin to tsmax) 150 °C 200 °C 60-180 sec. Time maintained above: - Temperature (TL) - Time (tL) 217 °C 60-150 sec. Peak/Classification Temperature (Tp) 260 °C Time within 5 °C of Actual Peak Temp. (tp) 20-40 sec. Ramp-Down Rate 6 °C/sec. max. Time 25 °C to Peak Temperature 8 min. max. How to Order TBU - CA 085 - 500 - WH TBU® Product Series CA = Bi-Series Impulse Voltage Rating 025 = 250 V 040 = 400 V 050 = 500 V 065 = 650 V 085 = 850 V Trigger Current 050 = 50 mA 100 = 100 mA 200 = 200 mA 300 = 300 mA 500 = 500 mA Hold to Trip Ratio Suffix W = Hold to Trip Ratio Package Suffix H = DFN Package Typical Part Marking Thermal Resistance vs Additional PCB Cu Area Added Cu Area (Sq. In.) 120 100 Thermal Resistance (°C/W) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. PIN 1 MANUFACTURER’S TRADEMARK

5 DIGIT PRODUCT CODE:

• 1ST ALPHA CHARACTER INDICATES PRODUCT FAMILY: A = TBU-CA SERIES
• 2ND & 3RD DIGITS INDICATE IMPULSE VOLTAGE.
• 4TH & 5TH DIGITS INDICATE TRIGGER CURRENT. MANUFACTURING DATE CODE:
• 1ST DIGIT INDICATES THE YEAR.
• 2ND & 3RD DIGITS INDICATE THE WEEK NUMBER.
• 4TH & 5TH DIGITS INDICATE LOT CODE. XXXXX YWWLL

Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. TBU-CA Series - TBU® High-Speed Protectors “TBU” is a registered trademark of Bourns, Inc. in the United States and other countries. REV. 01/17 Packaging Specifications B A D C N F G (MEASURED AT HUB) USER DIRECTION OF FEED CENTER LINES OF CAVITY EMBOSSMENT t D TOP COVER TAPE E W P DIMENSIONS: MM (INCHES) A B C D G N 326 (12.835) 330 (13.002) 1.5 (.059) 2.5 (.098) 12.8 (.504) 13.5 (.531) 20.2 (.795) - 16.5 (.650) 102 (4.016) A0 B0 D D1 E F 4.3 (.169) 4.5 (.177) 6.7 (.264) 6.9 (.272) 1.5 (.059) 1.6 (.063) 1.5 (.059) - 1.65 (.065) 1.85 (.073) 7.4 (.291) 7.6 (.299) K0 P P0 P2 t W 1.0 (.039) 1.2 (.047) 7.9 (.311) 8.1 (.319) 3.9 (.159) 4.1 (.161) 1.9 (.075) 2.1 (.083) 0.25 (.010) 0.35 (.014) 15.7 (.618) 16.3 (.642) QUANTITY: 3000 PIECES PER REEL