TB62713F | DigiCamel IC Datasheet

Online Datasheet

Read TB62713F online.

TB62713N MARKTECH | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 20

Technical content

Features

Constant Current row drivers for consistent display brightness.
Single device saves labor and board space.
128 character internal character set simplifies design efforts.
Automatically handles multiplex and display refresh tasks.
16 step programmable brightness control.
Available in thru hole and surface mount packages.
Data out cascade connection port. Performance Characteristics VDD = 4.5V~5.5V Column source output: -17V / 350mA Row select output: 17V / 0-50mA Max transition frequency: 15MHz TB62713F TB62713N SDIP24-P-300-1.78 Weight: 1.62g (Typ.) SSOP24-P-300-1.00 Weight: 0.32g (Typ.) Company Headquarters

3 Northway Lane North

Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office:

950 South Coast Drive, Suite 265

Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Block Diagram Maximum Ratings: CHARACTERISTICS SYMBOL RATING UNIT Supply Voltage VDD 7.0 volts LED Supply Voltage VCC 17.0 volts Source Output Current Columns 0~4 ICO -420.0 mA Row Drive Current Rows 0~6 IRO 60.0 mA Output Current IOH/IOL +/-5.0 mA Input Voltage VIN -0.3 ~ VDD ~+0.3 volts Clock Frequency FCLK 15.0 MHz Total Output Current IVDD 420.0 mA Power Dissipation TB62713N Pd 1.78 W TB62713F 0.62 Operation Temperature Topr -40 ~ +85 Storage Temperature Tstg -55 ~+150 Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Recommended Operating Condition: CHARACTERISTICS SYMBOL TEST CIRCUIT CONDITION MIN. TYP. MAX. UNIT Output Stage Supply Current ICC1 Set normal operation mode Rext=590Ω, Out R0~R6, all on VCC = 5V, Ta=25°C 370 mA ICC2 Set normal operation mode Rext=590Ω, Out R0~R6, all on VCC = 12V, Ta=25°C 390 mA Column C0~C4 Scanning Frequency fOSC Normal operation mode VDD=4.5 - 5.5V 300 600 1200 Hz Col. C0~C4 Leakage Current ILEAK1 All off mode, VCC=17V -20 µA Row R0~R6 Leakage Current ILEAK2 All off mode, VCE=17V mA Row R0~R6 Sink Current IRO Normal operation, VCE=.7V, Rext=590Ω, 36.5 49.4 µA Col. C0~C4 Leakage Voltage VOUT Normal operation mode IOUT-cn = -350mA 3.0 V Logic Supply Current IDD1 Standby Mode, Ta=25°C 200 µA IDD2 Blank Mode, Ta=25°C 12.5 mA Operating Supply Current IDD3 Normal operating mode fCLK=10MHz, Ta=25°C Data-in:Rows R0~R6 on 20.5 mA High Level Input Current IIH Data-in, Load&Clock VIN=5V µA Low Level Output Current IIL Data-in, Load&Clock VIN=0V µA High Level Output Voltage VOH1 Data out, IOH=-1mA 4.6 V VOH2 Data-out, IOH=-1µA VDD V Low Level Output Voltage VOL1 Data out, IOL=-1mA 0.4 V VOL2 Data-out, IOL=-1µA 0.1 V Clock Frequency FCLK Cascade connected MHz Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Switching Characteristics: CHARACTERISTICS SYMBOL CONDITION MIN. TYP. MAX. UNIT Data Hold Time (D-IN Clock) tDHO ns Data Set-up Time (D-IN Clock) tDST ns Serial Output Delay tPDSO CL=10pf ns High Level Pulse Width Of Clock tCLKH ns Low Level Pulse Width Of Clock tCLKL ns Pulse Width Of Load tw LD 100 ns Setup Time (Clock-Load) tCLK-LD ns Setup Time (Load-Clock) tLD-CLK ns Col. C0~C6 Propagation Delay (Load-Outn) tPDCO CL=10pf 5.0 µs Col. C0~C6 Rise Time (OUTn) tr CO CL=10pf 0.2 1.0 µs Col. C0~C6 Fall Time (OUTn) tf CO CL=10pf 0.2 1.0 µs Row R0 ~ R4 Propagation Delay (Load-Rn) tPDRO CL=10pf 10.0 µs Row R0~R4 Rise Time (Rn) tr RO CL=10pf 0.4 2.0 µs Row R0~R4 Fall Time (Rn) tf RO CL=10pf 0.4 2.0 µs Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Recommended Operating Conditions: CHARACTERISTICS SYMBOL CONDITION MIN. TYP. MAX. UNIT Output Stage Supply Voltage VCC 4.0 15.0 V Column C0~C6 Output Current ICO VCE=0.7V mA Row R0~R4 Output Current IRO VOUT=3.0V -280 mA Logic Supply Voltage VDD 4.5 5.5 V High Level Input Current IIH Data-In, Load&Clock,VIN=VDD µA Low Level Input Current IIL Data-In, Load&Clock,VIN=0V µA High Level Input Voltage VIH 0.7 VDD V Low Level Input Voltage VIL 0.3 VDD V Switching Condition Data Hold Time (D-IN Clock) tDHO ns Data Setup Time (D-IN Clock) tDST ns Propagation Delay (Clock D-Out) tPDSO CL=10pf ns High Level Pulse Width Of Clock tCLKH ns Low Level Pulse Width Of Clock tCLKL ns Pulse Width Of Load twLD 150 ns Setup Time (Clock-Load) tCLKLD 100 ns Setup Time (Load-Clock) tLDCLK 100 ns Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Timing Diagram: Terminal Description: PIN No. NAME FUNCTION VDD Logic Supply Voltage Data IN Serial Data Input To Shift Register Clock (CLK) Clock Input Terminal Load (LD) Load Input Terminal 5-11 Row R0~R6 Output Terminal to Row Cathodes P-GND GND for Row Out Test In 2 Test Terminal - Grounded During Normal Operation Test In 1 Test Terminal - Grounded During Normal Operation 5-17,19,2 Column C0-C4 Output Terminal to Column Anodes VCC Supply Voltage For LEDs Test OUT During Normal Operation Leave open Rext Constant Current Programming Terminal Data Out (DO) Cascade Connection To Next Display Stage L-GND Logic & Analog Ground Terminal Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. Figure 1. Action Mode this field is not required and not recognized. into the appropriate registers following the 16th clock pulse.

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Action Mode 1. Blank - Constant current segment drivers are off resulting in an all segments off condition. Data D15 ~ D12 are 0. D11~D0 are not relevant in blank mode. (Note: the device draws < 12.5ma in Blank mode.) 2. Normal (Operation) - Instructs device to display data loaded during previous steps. D11~ D0 are not relevant in the Normal Operation mode. 3. Load Register - Directs the device to recognize and load D11~ D0. In this mode D11 ~ D8 determines the specific register to be loaded (see figure 2) and D7 ~ D0 serves as the actual data to be loaded for programming the brightness (duty cycle) or the particular digit. 4. All On - All constant current row drivers are on resulting in an all dots illuminated condition. D11 ~ D0 are not relevant in this mode. 5. Stand By - All display drivers off condition. The Stand-By command turns off all internal bias currents and serves as a low power consumption mode (<.2ma). Used with Stand-By set up commands “All Data Clear” or “Data Not Cleared” (table 7). The initial state, upon power up, is the BLANK state. Application Note: Stand-By and Blank perform similar functions in that the display is totally blank when either command is input. Stand-By provides a low power consumption (<.2ma current draw on VDD) mode by turning off all internal bias currents in the internal driver circuits. The Stand-By com- mand also cuts off the Rext bias current used to regulate the programmed constant current within the device. Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. Figure 2. LOAD REGISTER Mode this field is not required and not recognized. Register Action mode command (see Figure 1 - Action mode).

Duty Register - Enables the device to accept duty cycle (brightness) setting. (see table 3 -

Duty Cycle control register). Sixteen brightness steps (0/16 to 15/16) are available.

Character Data Register - Enables the device to accept the data to program the 5 X 7 matrix

character as encoded in D7~D0.

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Brightness Control Brightness is controlled by controlling the “on time” duty cycle. The device allows for 16 bright- ness as illustrated in list 3 with 0/16 as the dimmest setting (not illuminated) to 15/16 as the brightest setting. The duty cycle control register is addressed with a 20 Hex command at D15~D8 and the appropriate data per list 3 at D3~D0. D7~D4 are not recognized by the duty cycle register. The initial state, upon power up is 15/16, or full brightness. “x” indicates that data is required in this field to execute the function. “-” indicates that data in this field is not required and not recognized. REGISTER DATA INITIAL STATE DUTY CYCLE D15~D8 D7~D4 Hex Code 20H 20X0H 20H 20X1H 20H 20X2H 20H 20X3H 20H 20X4H 20H 20X5H 20H 20X6H 20H 20X7H 20H 20X8H 20H 20X9H 20H 20XAH 20H 20XBH 20H 20XCH 20H 20XDH 20H 20XEH 20H 20XFH Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F STAND-BY Commands Two STAND-BY commands are available as illustrated in Table 7. STAND-BY / NO DATA CLEAR places the device in a power save mode (see application note - ACTION Mode section) while leaving data intact in the various registers. This mode is enabled by a 4 Hex command at D15~D12 and 0 Hex at D3~D0. D11~D4 are not relevant in the STAND-BY / NO DATA CLEAR Mode. STAND-BY / DATA CLEAR also places the device in a power save mode and clears data in the various registers leaving registers in their initial state. This mode is enabled by a 4 Hex com- mand at D15~D12 and 1 Hex at D3~D0. D11~D4 are not relevant in the STAND-BY / NO DATA CLEAR Mode. “ x” indicates that data is required in this field to execute the function. “-” indicates that data in this field is not required and not recognized. REGISTER DATA D15~D8 D7~D4 Hex Code Stand-By (No Data Clear) 4-H 4XX0H Stand-By (Clear Data) 4-H 4XX1H Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Operation example. The following example begins with a blank display. Step 1 sets the brightness setting to maxi- mum brightness (15/16 duty cycle). The next step instructs the device to display the character A. Step 4 instructs the device to display the character B. The next four steps (steps 5 - 8) display the characters C,D,E and F in sequence, all at full brightness. Step 9 blanks but does not clear the display and step 10 reprograms the brightness to half (8/16 duty cycle) brightness. Step 11 again displays the character F at half brightness. Step 12 again blanks the device and step 13 programs the character G. Step 14 instructs the device to display the character G (still at the half brightness setting) and step 15 clears and blanks the display. STEP D15~D12 D11~D8 D7~D4 D3~D0 OUTPUT R0~R6 OUTPUT C0~C4 MODE DISPLAY INDICATION Off Off Initial State (Clear Mode) All Blank 0010 0000 XXXX 1111 Off Off Duty=15/16 All Blank 0010 0001 0100 0011 Off Off Character Data = A All Blank 0001 XXXX XXXX XXXX Off On Normal A 0010 0001 0100 0010 On On Character Data = B B 0010 0001 0100 0011 On On Character Data = C C 0010 0001 0100 0100 On On Character Data = D D 0010 0001 0100 0101 On On Character Data = E E 0010 0000 0100 0110 On On Character Data = F F 0000 XXXX XXXX XXXX Off Off Blank All Blank 0010 0000 XXXX 1000 Off Off Duty=8/16 All Blank 0001 XXXX XXXX XXXX On On Normal F - Half Brightness 0000 XXXX XXXX XXXX Off Off Blank All Blank 0010 0000 0100 0111 Off Off Character Data = G All Blank 0001 XXXX XXXX XXXX On On Normal G - Half Brightness 0100 XXXX XXXX 0000 Off Off Stand-By (Shut Down) All Blank Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F State Movement Diagram Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Character Generator List Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Test Circuit: Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Graphs: Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic For up-to-date product info visit our web site at www.marktechopto.com All specifications subject to change. TB62713N/F TB62713N/F TB62713N/F TB62713N/F TB62713N/F Outline Drawings: Company Headquarters Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: info@marktechopto.com California Sales Office: Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314

Product Information

TB62713F specifications and overview.

Summary

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic

Description

TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic

Source title TB62713F Datasheet(PDF) - Marktech Corporate

Related Parts

More parts from the same family.

Browse manufacturer