TB3571

TB3571 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

August, 2011 3M™ Hook and Loop Fastener Trial Bag TB3571 / TB3572 Product Description

3M™ Hook and Loop Fastener Trial Bag TB3571 / TB3572 Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Typical Physical Properties Thickness Test Condition TB3571: 2.4 mm, TB3572: 3.2 mm TB3571: 91 mil, TB3572: 125 mil Unmated 3.6 mm 140 mil Engaged Property: Thickness Property Values Full Roll Product Number 3M™ Fasteners SJ3571 Hook & SJ3572 Loop Backing High Performance Acrylic PSA Liner Polyolen with embossed 3M logo Liner Thickness 0.1 mm 4 mil Liner Color Clear Material Hook - Woven Nylon Loop - Woven Nylon Typical Performance Characteristics Property Values Substrate Notes Dynamic Tensile 11 lb/in² Nylon Hook to Nylon Loop Dynamic Shear 22 lb/in² Nylon Hook to Nylon Loop Cleavage Strength 13.1 g/cm width 7.5 lb/in width Nylon Hook to Nylon Loop T-Peel Adhesion 3.5 g/cm width 2 lb/in width Nylon Hook to Nylon Loop Run at 12 inches per minute 90° Peel Adhesion 3.9 g/cm width 2.2 lb/in width Nylon Hook to Nylon Loop Run at 12 inches per minute Cycle Life 5,000 Nylon Hook to Nylon Loop Number of closures before losing 50% of original strength Product Performance This guide should assist you in determining which product will adhere best to your substrate for your application.

3M™ Hook and Loop Fastener Trial Bag TB3571 / TB3572 Typical Performance Characteristics (continued) Additional Informationnotes: This guide should assist you in determining which product will adhere best to your substrate for. Design Considerations Handling/Application Information Application Techniques The following information is intended to assist the designer considering the use of adhesive-coated 3M™ Hook and Loop Fasteners. System product performance depends upon a number of factors, including the fastener (material, adhesive and area), application method, surface characteristics (material, texture and cleanliness), environmental conditions (moisture, ultraviolet and temperature exposure) plus the time it is expected to support a given load. Because many of these factors are uniquely within the user’s knowledge and control, it is required that the user evaluate 3M products to determine whether they are t for a particular purpose and suitable for the user’s substrates, method of application and desired end use.

3M™ Hook and Loop Fastener Trial Bag TB3571 / TB3572 Handling/Application Information (continued) Directions for Use Surface Preparation Storage and Shelf Life Store in original packaging between 60° to 80°F (16° to 27°C) and 40 to 60% relative humidity. TB3000 TB3401 /TB3402 TB3506 / TB3507 TB3526N /TB3527N TB3530 / TB3531 TB3571 / TB3572 Material Hook - Polypropylene Loop - Woven Nylon Hook - Polypropylene Hook - Woven Nylon Hook - Woven Nylon Hook - Woven Nylon Backing No Adhesive, Back to Back Hook and Loop No Adhesive, Sew on General Purpose Acrylic High Performance Rubber PSA General Purpose Rubber PSA High Performance Acrylic PSA Liner 83 lb Brown Polykraft with green 3M Polyethylene with red “3M” Polypropylene Polyolen with embossed 3M logo Liner Thickness (mm) 0.08 0.08 0.1 Liner Color White White Clear

3M™ Hook and Loop Fastener Trial Bag TB3571 / TB3572 References ISO Statement Recognition/Certication Technical Information Product Use Warranty, Limited Remedy, and Disclaimer Limitation of Liability This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 and ISO/TS 16949:2002 standards. The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but theaccuracy or completeness of such information is not guaranteed. Many factors beyond 3M’s control and uniquely within user’s knowledge and control can aect the use and performance of a 3M product in a particular application.Given the variety of factors that can aect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whetherit is t for a particular purpose and suitable for user’s method of application. Unless an additional warranty is specically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets theapplicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING,BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIEDWARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, thenthe sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential,regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

3M™ Hook and Loop Fastener Trial Bag TB3571 / TB3572 Industrial Adhesives and Tapes Division 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3m.com Please recycle. © 3M 2018. All Rights Reserved. The brands listed above are trademarks of 3M.