DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
SURFACE MOUNT GLASS P ASSIVATED BRIDGE RECTIFIERS Forward Current : 2A Reverse V oltage : 100V to 1000V FE ATURES Reverse Voltage: 100 to 1000 V Forward Current: 2.0 A High Surge Current Capability Designed for Surface Mount Application Glass Passivated Chip Junction MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ a mbient temperature unless otherwise specified. Single phase half-wave 60 Hz, resistive or inductive load, for capacitive load current derating by 20 %. PARAMETER SYMBOL TB1F-20 TB2F-20 TB4F-20 TB6F-20 TB8F-20 TB10F-20 UNIT Maximum Repetitive Peak Reverse Voltage V RRM 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current at TC =125℃ IF(AV) 2.0 A Peak Forward Surge Current (Note1) IFSM 55 A Maximum Forward Voltage at 2.0A V F 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage at TA=25℃ at TA=125℃ IR 5 100 μA Typical Junction Capacitance (Note2) C J 30 pF Typical Thermal Resistance (Note3) RθJA RθJC 16 ℃/W Operating Junction Temperature Range T J -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Notes: 1. Measured at 8.3 ms single half sine wave superimposed on rated load (JEDEC Method). 2. Measured at 1MHz and applied reverse voltage of 4 V D C. PINNING PIN DESCRIPTION
1 Input Pin（~）
2 Input Pin（~）
3 Output Anode（+）
4 Output Cathode（-）
Case: ABF Terminals: Solderable per MIL-STD-750, Method 2026 Weight: 82 mg(Approx) 1 / 3www.pingjingsemi.com Revision:1.0 Oct-2017
RATINGS AND CHARACTERISTIC CURVES 10 1001 0.5 1.0 1.5 2.0 0.0 25 50 75 100 125 150 175 Fig.1 Derating Curve Average Rectified Output Current Average Rectified Output Current (A) Fig.5 Maximum Non-Repetitive Peak Forward Surge Current Peak A)Forward Surge Current ( Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method) Fig.2 Typical Reverse Characteristics 0.1 1.0 100 20 40 60 80 100 12000 140 Percent of Rated Peak Voltage (%)Reverse Instaneous Current （ A）Reverse μ T =125J °C T =25J °C Fig.4 Typical Junction Capacitance JunctionCapacitance (pF) 1.0 10 1000.1 100 Reverse Voltage (V) T =25J °C Fig.3 Typical Instaneous Forward Characteristics Instaneous Forward Current (A) 0.0 0.01 0.1 1.0 Instaneous Forward Voltage (V) T =25J °C pulse with 300μs 1% duty cycle Case Temperature (°C) 2.5 Resistive or Inductive Load TB1F-20 thru TB10F-20 2 / 3www.pingjingsemi.com Revision:1.0 Oct-2017
RECOMMENDED MOUNTING PAD SIZE ABF mechanical data UNIT A C D E H E d e L L 1 a ∠ mil max 47 8 .7 205 177 252 165 28 37 24 8 min 39 5 .9 193 166 236 150 20
ORDERING INFORMATION
∠ALL H L C a A d e e E D ABF 4.0 157 6.2 244 1.0 2.0 mm mil Unit 5,000/Tape & Reel (13 inches) TB1F-20 thru TB10F-20 3 / 3www.pingjingsemi.com Revision:1.0 Oct-2017