TB120S JUXING | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Ratings at 25 ambient temperature unless otherwise specified. Single phase half-wave 60 Hz, resistive or inductive load, for capacitive load current derate by 20 %. Maximum Ratings and Electrical characteristics Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) Maximum Forward Voltage at 1.0 A Parameter Operating and Storage Temperature Range Typical Junction Capacitance（Note1） IO IFSM VF 1.0 1.1 -55 ~ +150 A A V μA pF Units Cj T , Tj stg Symbols Typical Thermal Resistance（Note2） °C/W RθJA RθJC Average Rectified Output Current at T = 125 °Cc Maximum DC Reverse Current at Rated DC Blocking Voltage (@VR=1000V) IR @T =25 °CA @T =125 °CA TB120S Note: 1. Measured at 1MHz and applied reverse voltage of 4 V D.C. FEATURES: Glass Passivated Chip Junction High Surge Current Capability Designed for Surface Mount Application

  • Lower clamping voltage and excellent performance on ringing waves testing. RoHS compliant Large withstanding surge current capability : 200A (@8/20μs) Lead Free Finish/RoHS Compliant Green Molding Compound (No Halogen and Antimony) PINNING PIN

DESCRIPTION

4 Output Cathode（-）

Output Anode（+） Input Pin（~） Input Pin（~） MECHANICAL DATA

  • Case: MBS
  • Terminals: Solderable per MIL-STD-750, Method 2026
  • A pprox. Weight: 100mg / 0.0035oz NOTES: 1. The breakdown voltage was measured at 1mA 2. The clamping voltage was measured at 8/20μs standard current, (1A) 3. The peak current was tested at 8/20μs waveform Technology Data Maximum allowable continuous AC voltage at 50-60Hz Maximum allowable clamping voltage Symbol TB240S Unit VRMS 310 V 700VC Maximum allowable continuous DC voltage VDC 440 A Maximum peak current (8/20μs) Ipeak 200 V V Operating Junction Temperature and Storage Temperature Range T , Tj stg °C-55 ~ +150 Maximum Ratings and Thermal Characteristics(TA = 25°C unless otherwise specified) TB120S 155 350 220 TB240S VBR V237~263 492~543AC input Stand-off Voltage SU GE SUPPRESSOR BRIDGER TB120S~TB240S http://www.trr-jx.comversion: 02

Fig.5 Maximum Non-Repetitive Peak Forward Surage Current Peak A)Forward Surage Current ( Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method) Fig.2 Typical Reverse Characteristics 0.1 1.0 100 20 40 60 80 100 12000 140 percent of Rated Peak Voltage (%)Reverse Instaneous Current（ A）Reverse μ T =125J °C T =25J °C Fig.4 Typical Junction Capacitance Junction Capacitance ( pF) 1.0 10 1000.1 100 Reverse Voltage (V) T =25J °C 0.2 0.4 0.6 0.8 1.0 0.0 25 50 75 100 125 150 175 Fig.1 Derating Curve Average Rectified Output Current Average Rectified Output Current (A) Case Temperature (°C) 1.2 Fig.3 Typical Instaneous Forward Characteristics Instaneous Forward Current (A) 0.0 0.01 0.1 1.0 Instaneous Forward Voltage (V) T =25J °C pulse with 300μs 1% duty cycle Resistive or Inductive Load Fig.7 Peak Pulse Power Rating Curve 10.1 0.1 1.0 100 10 100 1000 10000 P ,PEAK PULSE FORWARD ,kWPPM t ,PULSE WIDTH ,usd Non-Repetive Pulse. T =25A °C Fig.6 Off-State Current vs. Junction Temperature I(DRM) OFF-STATE CURRENT ( A)μ 50 75 100 12525 0.01 0.1 1.0 Tj ,JUNCTION TEMPERATURE(°C) 100 VDRM=50V TB120S VDRM=400V TB240S http://www.trr-jx.comversion: 02 Characteristic Curves A =25 ℃ unless otherwise noted) SU GE SUPPRESSOR BRIDGER TB120S~TB240S

Fig.8 Derating Curve for number of pulses Fig.9 V/I Curve Pulses Number 100 1000 Voltage(V) CURRENT (A)Pulses Number 100 1000 10 20 30 40 50 60 70 80 90 100 Surge (A) Fig.11 The IR reflow and temperature of soldering for Pb free process IEC61000-4-5 Standards SEVERITY LEVEL T1(=1.67t’1) T2 1 10us 1000us 2 8us 20us0 t’1 t V 0.3 1.0 0.9 0.5 Fig.10 Surge Waveform 250 225 200 175 150 125 100 01:00:00 02:00:00 03:00:00 04:00:00 Temperature (°C) Time (min) Pre-Heat 175°C (60~120sec) Peak Temp 260°C(3~10sec) Peak Temp 245°C (10~20sec) IR reflow Pb free process suggestion profile (2) Temp. maintain at 175±25 180seconds max. (3) Temp. maintain above 217℃ 60~150 seconds (4) The peak temperature must be at least 260℃, the time above the 255℃ must be within 20s (1) Ramp-up rate (217℃ to peak) +3℃/second max. 8/20us waveform current Pulse number TB120S TB240S http://www.trr-jx.comversion: 02 SU GE SUPPRESSOR BRIDGER TB120S~TB240S

2.5 1000.9 6.0 236 2.4 mm (mil) Unit ： PACKAGE OUTLINE Plastic surface mounted package; 4 leads MBS UNIT mm max min mil max min 102 8.7 5.9 197 177 161 142 276 252 A C D E HE ∠d 0.7 0.5 e 2.7 2.3 106 L L1 a 1.7 1.3 1.1 0.5 0.2 MBS mechanical data C ∠ALL ROUND HE A E D e e dL a TB240S TB240S http://www.trr-jx.comversion: 02 SU GE SUPPRESSOR BRIDGER TB120S~TB240S