TAR5SB30 TOSHIBA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
/Gb7/G20Low stand-by current /Gb7/G20Over-temperature/over-current protection /Gb7/G20Operation voltage range is wide. /Gb7/G20Maximum output current is high. /Gb7/G20Low dropout voltage /Gb7/G20Small package (SOT-23 5 pin) /Gb7/G20Ceramic capacitors can be used. Pin Assignments (top view) Over-temperature/over-current protection functions are NOT guarantee maximum-ratings of these devices. Do not use devices under conditions in which their maximum ratings will be exceeded. Weight: 0.014 g (typ.) 1 3 2 VOUT VIN GND NOISE CONTROL Preliminary
TAR5SB15~TAR5SB33 2001-04-13 2 List of Products Number and Marking Marking on the Product Products No. Marking TAR5SB15 1B5 TAR5SB18 1B8 TAR5SB23 2B3 TAR5SB24 2B4 TAR5SB25 2B5 TAR5SB27 2B7 TAR5SB28 2B8 TAR5SB29 2B9 TAR5SB30 3B0 TAR5SB33 3B3 Maximum Ratings (Ta /G3d/G3d/G3d/G3d 25°C) Characteristics Symbol Rating Unit Supply voltage V IN 15 V Output current I OUT 200 mA 200 (Note 1) Power dissipation P D 380 (Note 2) mW Operation temperature range T opr /G2d40 to 85 °C Storage temperature range T stg /G2d55 to 150 °C Note 1: Unit Ratintg Note 2: Mounted on a glass epoxy circuit board of 30 /Gb4 30 mm. Pad dimension of 50 mm2
3 B 0
Example: TAR5SB30 (3.0 V output) Preliminary
TAR5SB15~TAR5SB33 2001-04-13 3 TAR5SB15, TAR5SB18 Electrical Characteristic (unless otherwise specified, VIN /G3d/G3d/G3d/G3d VOUT /G2b/G2b/G2b/G2b 1 V, IOUT /G3d/G3d/G3d/G3d 50 mA, CIN /G3d/G3d/G3d/G3d 1 /G6d/G6d/G6d/G6dF, COUT /G3d/G3d/G3d/G3d 10 /G6d/G6d/G6d/G6dF, CNOISE /G3d/G3d/G3d/G3d 0.01 /G6d/G6d/G6d/G6dF, Tj /G3d/G3d/G3d/G3d 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Output voltage V OUT Please refer to the Output Voltage Accuracy table. Line regulation Reg ･line VOUT /G2b 1 V /G3c/G3dVIN /G3c/G3d15 V, IOUT /G3d 1 mA /Gbe 3 15 mV Load regulation Reg ･load 1 mA /G3c/G3dIOUT /G3c/G3d150 mA /Gbe 25 75 mV IB1 IOUT /G3d 0 mA /Gbe 170 /Gbe Quiescent current IB2 I OUT /G3d 50 mA /Gbe 550 850 /G6dA Stand-by current I B (OFF) V CT /G3d 0 V /Gbe /Gbe 0.1 /G6dA Output noise voltage V NO IOUT /G3d 10 mA,
10 Hz /G3c/G3df /G3c/G3d100 kHz, Ta /G3d 25°C /Gbe 30 /Gbe /G6dVrms
Temperature coefficient T CVO /G2d40°C /G3c/G3dTopr /G3c/G3d85°C /Gbe 100 /Gbe ppm/°C Input voltage V IN /Gbe 2.4 /Gbe 15 V Ripple rejection R.R. IOUT /G3d 10 mA, f /G3d 1 kHz, VRipple /G3d 500 mVp-p, Ta /G3d 25°C /Gbe 70 /Gbe dB Control voltage (ON) V CT (ON) /Gbe 1.5 /Gbe V IN V Control voltage (OFF) V CT (OFF) /Gbe /Gbe /Gbe 0.4 V Control current (ON) I CT (ON) V CT (ON) /G3d 1.5 V /Gbe 3 10 /G6dA Control current (OFF) I CT (OFF) V CT (OFF) /G3d 0 V /Gbe 0 0.1 /G6dA TAR5SB23~TAR5SB33 Electrical Characteristic (unless otherwise specified, VIN /G3d/G3d/G3d/G3d VOUT /G2b/G2b/G2b/G2b 1 V, IOUT /G3d/G3d/G3d/G3d 50 mA, CIN /G3d/G3d/G3d/G3d 1 /G6d/G6d/G6d/G6dF, COUT /G3d/G3d/G3d/G3d 10 /G6d/G6d/G6d/G6dF, CNOISE /G3d/G3d/G3d/G3d 0.01 /G6d/G6d/G6d/G6dF, Tj /G3d/G3d/G3d/G3d 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Output voltage V OUT Please refer to the Output Voltage Accuracy table. Line regulation Reg ･line VOUT /G2b 1 V /G3c/G3dVIN /G3c/G3d15 V, IOUT /G3d 1 mA /Gbe 3 15 mV Load regulation Reg ･load 1 mA /G3c/G3dIOUT /G3c/G3d150 mA /Gbe 25 75 mV IB1 IOUT /G3d 0 mA /Gbe 170 /Gbe Quiescent current IB2 I OUT /G3d 50 mA /Gbe 550 850 /G6dA Stand-by current I B (OFF) V CT /G3d 0 V /Gbe /Gbe 0.1 /G6dA Output noise voltage V NO IOUT /G3d 10 mA, Dropout voltage V IN-VOUT I OUT /G3d 50 mA/G20/Gbe 130 200 mV Temperature coefficient T CVO /G2d40°C /G3c/G3dTopr /G3c/G3d85°C /Gbe 100 /Gbe ppm/°C Input voltage V IN /Gbe VOUT /G2b 0.2 V /Gbe 15 V Ripple rejection R.R. IOUT /G3d 10 mA, f /G3d 1 kHz, VRipple /G3d 500 mVp-p, Ta /G3d 25°C /Gbe 70 /Gbe dB Control voltage (ON) V CT (ON) /Gbe 1.5 /Gbe V IN V Control voltage (OFF) V CT (OFF) /Gbe /Gbe /Gbe 0.4 V Control current (ON) I CT (ON) V CT (ON) /G3d 1.5 V /Gbe 3 10 /G6dA Control current (OFF) I CT (OFF) V CT (OFF) /G3d 0 V /Gbe 0 0.1 /G6dA Preliminary
TAR5SB15~TAR5SB33 2001-04-13 4 Output Voltage Accuracy (VIN /G3d/G3d/G3d/G3d VOUT /G2b/G2b/G2b/G2b 1 V, IOUT /G3d/G3d/G3d/G3d 50 mA, CIN /G3d/G3d/G3d/G3d 1 /G6d/G6d/G6d/G6dF, COUT /G3d/G3d/G3d/G3d 10 /G6d/G6d/G6d/G6dF, CNOISE /G3d/G3d/G3d/G3d 0.01 /G6d/G6d/G6d/G6dF, Tj /G3d/G3d/G3d/G3d 25°C) Product No. Symbol Min Typ. Max Unit TAR5SB15 1.44 1.5 1.56 TAR5SB18 1.74 1.8 1.86 TAR5SB23 2.24 2.3 2.36 TAR5SB24 2.34 2.4 2.46 TAR5SB25 2.43 2.5 2.57 TAR5SB27 2.63 2.7 2.77 TAR5SB28 2.73 2.8 2.87 TAR5SB29 2.83 2.9 2.97 TAR5SB30 2.92 3.0 3.08 TAR5SB33 VOUT 3.21 3.3 3.39 V Preliminary
TAR5SB15~TAR5SB33 2001-04-13 5 Thermal Resistance Evaluation Board Recommended Application Circuit The noise capacitor should be connected to NOISE pin to GND for stable operation. The recommended value is higher than 0.0047 /G6dF. Preliminary Circuit board material: glass epoxy, Circuit board dimension: 30 mm /Gb4 30 mm, Copper foil pad area: 50 mm2 (t /G3d 0.8 mm) COUT CNOISE VIN VOUT CONTROL GND NOISE Control Level Operation HIGH ON LOW OFF VIN NOISE 1 3 GND VOUT CONTROL 0.01 /G6dF 1 /G6dF 10 /G6dF
TAR5SB15~TAR5SB33 2001-04-13 6 Package Dimensions Weight: 0.014 g (typ.) Preliminary
TAR5SB15~TAR5SB33 2001-04-13 7 Preliminary /Gb7/G20TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. /Gb7/G20The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. /Gb7/G20The products described in this document are subject to the foreign exchange and foreign trade laws. /Gb7/G20The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. /Gb7/G20The information contained herein is subject to change without notice. 000707EBARESTRICTIONS ON PRODUCT USE