TAH OHMITE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • 20 Watt Power Rating at 25°C Case Temperature
  • High Pulse Tolerant Design
  • Quick-snap Molded Package
  • Very Low Inductance Design
  • Resistor Package Electrically Isolated from Heat Sink
  • Low Thermal Resistance to Heat Sink @ RTH<6.25°C/W
  • Tube Packaging Available

applications

  • Frequency Conversion
  • High Frequency Balancing
  • Snubbers (continued)

1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com146 dimensions (iin./mm)

ordering inFormation

0.400–0.420" (10.15–10.67mm) 0.630–0.650" (16.00–16.52mm) 0.450–0.550" (11.43–13.97mm) 0.100–0.160" (2.54–4.06mm) 0.045–0.055" (1.14–1.40mm) 0.026–0.034" (0.66–0.86mm) 0.190–0.210" (4.82–5.34mm) 0.115–0.135" (2.92–3.44mm) 0.016–0.024" (0.40–0.60mm) 0.060–0.080" (1.52–2.04mm) Standard Part Numbers TAH20P100RJE TAH20P10K0JE TAH20P10R0JE TAH20P150RJE TAH20P15R0JE TAH20P1K00JE TAH20P1K50JE TAH20P1R00JE TAH20P1R50JE TAH20P200RJE TAH20P20R0JE TAH20P220RJE TAH20P22R0JE TAH20P240RJE TAH20P24R0JE TAH20P2K00JE TAH20P2K20JE TAH20P2K40JE TAH20P2R00JE TAH20P2R20JE TAH20P2R40JE TAH20P330RJE TAH20P33R0JE TAH20P390RJE TAH20P39R0JE TAH20P3K30JE TAH20P3K90JE TAH20P3R30JE TAH20P3R90JE TAH20P470RJE TAH20P47R0JE TAH20P4K70JE TAH20P4R70JE TAH20P510RJE TAH20P51R0JE TAH20P5K10JE TAH20P5R10JE TAH20P750RJE TAH20P75R0JE TAH20P7K50JE TAH20P7R50JE TAH20PR050JE TAH20PR100JE TAH20PR150JE TAH20PR200JE TAH20PR220JE TAH20PR240JE TAH20PR330JE TAH20PR390JE TAH20PR470JE TAH20PR510JE TAH20PR750JE Ohm Value Example: 2R40 = 2.4 Ohms 2K40 = 2400 Ohms Tolerance F = 1% J = 5% StandardSeries TAH20P10R0JE Package Code RoHS Compliant Non-compliant version unavailable tah series

20 Watt TO220 Package

THIS PRODUCT IS DESIGNED FOR USE WITH PROPER HEATSINKING. Maximum base plate temperature of the resistor must be monitored and kept within specified limits to establish the power rating. Best technique is to attach a thermocouple to the side of the base plate of the resistor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor.