TA4020FT TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

TOSHIBA Linear Integrated Circuit Silicon-Germanium Monolithic TA4020FT ○ UHF LOW NOISE AMPLIFIER APPLICATION ・Thin Extreme Super mini Quad Package (4pin) :TESQ

FEATURES

  • Low Noise Figure: NF=0.95dB (@ f=1.5GHz)
  • High Gain: |S21e|2=15.0dB (@ f=1.5GHz)
  • Lead free article Marking(Tentative) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Voltage at pin Vcc VCC 3.7 V Current into pin Vcc ICC 10 mA RF input power Pin 10 dBmW Total Power dissipation PD 37 mW Junction temperature Tj 150 °C Operate temperature Range Topr −40～85 °C Storage temperature Range Tstg −55～150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Recommend Operation range Characteristics Symbol Test Condition Min Typ. Max Unit Voltage supply VCC ⎯ 2.3 3.0 3.3 V Unit: mm JEDEC － JEITA － TOSHIBA － Weight: 0.0015 g 4 3 1 2 U 3 0.2±0.05 1.2±0.05 2 3 1.2±0.05 0.9±0.05 0.8±0.05 0.12±0.05 0.52±0.05 1. IN 2. GND 3. OUT 4. Vcc TESQ

Electrical Characteristics (Vcc = 3V, Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Circuit Current ICC Vcc = 3V 3.5 5 7 mA |S21e| (1) Vcc = 3V, f = 1.5GHz 13 15 ⎯ dB Insertion Gain |S21e| (2) Vcc = 3V, f = 2.6GHz 8.5 10.5 ⎯ dB NF(1) Vcc = 3V, f = 1.5GHz, Zs = Zsopt ⎯ 0.95 1.25 dB Noise Figure NF(2) Vcc = 3V, f = 2.6GHz, Zs = Zsopt ⎯ 1.25 ⎯ dB IIP3(1) Vcc = 3V, f = 1.5GHz ⎯ -9.5 ⎯ dBmW Input Third order Intercept Point IIP3(2) Vcc = 3V, f = 2.6GHz ⎯ -4 ⎯ dBmW Caution: This device is sensitive to electrostatic discha rge due to applied the high frequency transistor process of fT=60GHz class is used for this product. Please make enough tool and equipment earthed when you handle. RF Test Circuit (Top View) Equivalent Circuit IN GND VCC OUT 47 pF 10000 pF 100 pF 27 pF

The circuits and measurements contained in this document are given only in the context of as examples of applications for these products. Moreover, these example application circuits are not intended for mass production, since the high-frequency characteristics (the AC characteristics) of these devices will be affected by the external components which the customer uses, by the design of the circuit and by various other conditions. It is the responsibility of the customer to design external circuits which correctly impl ement the intended application, and to check the characteristics of the design. TOSHIBA assume no responsibility for the integrity of customer circuit designs or applications. ICC - VCC PIN -POUT, IM3 Circuit current ICC (mA) 012345 Ta=25°C Output power level POUT (dBmW) 3rd order inter modulation M3 (dBmW) -80 -70 -60 -50 -40 -30 -20 -10 Vcc=3V f1=1.5G H z f2=1.501GHz Ta=25°C Supply voltage VCC (V) Input power level PIN (dBmW) |S21e|2 - f NF - f Insertion gain |S21e|2 (dB) 0.1 1 10 Vcc=3V Ta=25°C Noise figure NF (dB) 0.2 0.4 0.6 0.8 1.2 1.4 1.6 1.8 0123 Vcc=3V Ta=25°C Frequency f (GHz) Frequency f (GHz)

RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.