TA4018F TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

/Gb7/G20High gain: |S21|2 = 11dB (@45 MHz, at Maximum gain) /Gb7/G20Gain control range: GR = 37dB (@45 MHz) /Gb7/G20Low distortion: IM3 = 42dB (@45 MHz, at Maximum gain) /Gb7/G20Operating supply voltage: VCC = 4.75 V~5.25 V Maximum Ratings (Ta /G3d/G3d/G3d/G3d 25°C) Characteristics Symbol Rating Unit Supply voltage V CC 5.5 V Total power dissipation P D (Note 1) 550 mW Operating temperature T opr /G2d40~85 °C Storage temperature T stg /G2d55~150 °C Note 1: When mounted on the glass epoxy of 2.5 cm 2 /Gb4 0.4 t Pin Assignment Weight: 0.02g (typ.) VGCA GND OUT (1) OUT (2) 7 6 5 VCC 1 2 3 4 IN (2)NC IN (1) 4018F

Electrical Characteristics (Ta /G3d/G3d/G3d/G3d 25°C, VCC /G3d/G3d/G3d/G3d 5 V, Zg /G3d/G3d/G3d/G3d Zl /G3d/G3d/G3d/G3d 50 /G57/G57/G57/G57) Characteristics Symbol Test Circuit Test Condition Min Typ. Max Unit Circuit current I CC VGCA /G3d 3 V, Non carrier 21 28 35 mA Input return loss |S11| 2 VGCA /G3d 3 V, f /G3d 45 MHz /Gbe /G2d0.3 /Gbe dB Insertion gain (1) |S21| 2(1) VGCA /G3d 3 V, f /G3d 45 MHz 8 11 /Gbe dB Insertion gain (2) |S21| 2(2) VGCA /G3d 1 V, f /G3d 45 MHz /G2d36 /G2d26 /G2d16 dB Isolation |S12| 2 VGCA /G3d 3 V, f /G3d 45 MHz /Gbe /G2d50 /Gbe dB Output return loss |S22| 2 VGCA /G3d 3 V, f /G3d 45 MHz /Gbe /G2d5 /Gbe dB Gain control range GR |S21| 2(2)-|S21|2(1) 24 37 /Gbe dB Noise figure NF VGCA /G3d 5 V, f /G3d 45 MHz /Gbe 11.5 15 dB 3rd order Inter Modulation IM3 Fig1 VGCA /G3d 3 V, f1 /G3d 45 MHz, f2 /G3d 44 MHz Pin /G3d /G2d20dBmW 32 42 /Gbe dB CAUTION: This device electrostatic sensitivity. Please handle with caution.

C.Gain – VGCA VGCA ( V ) C.Gain (dB) VCC /G3d 5 V f /G3d 44 MHz Ta /G3d 25°C /G2d50 0.0 /G2d10 5.01.0 /G2d30 /G2d20 /G2d40 4.0 3.0 Pout, IM3, IM2 – Pin Pin (dBmW) Pout, IM3, IM2 (dBmW) VCC /G3d 5 V f /G3d 44 MHz, 45 MHz Ta /G3d 25°C /G2d100 /G2d50 /G2d60 /G2d5 /G2d40 /G2d80 /G2d40 /G2d45 /G2d35 /G2d25 /G2d15 /G2d30 /G2d70 /G2d90 /G2d50 /G2d10 /G2d20 /G2d20 /G2d30 /G2d10 Po IM2 IM3 Po VGCA /G3d 3.0 V VGCA /G3d 0.5 V IM2 NF-f 0 200 400 600 800 1000 f (MHz) NF (dB)

VGC=0.5V Vcc=5V VGC=3V Vcc=5V |S21| 2-f -60 -50 -40 -30 -20 -10 0 200 400 600 800 1000 f(MHz) |S21| 2 (dB) |S12| 2-f -140 -120 -100 -80 -60 -40 -20 0 200 400 600 800 1000 f(MHz) |S12| 2 (dB) |S21| 2-f 0 200 400 600 800 1000 f (MHz) |S21| (dB) S22 |S12| 2-f -120 -100 -80 -60 -40 -20 0 200 400 600 800 1000 f (MHz) |S12| 2 (dB)

|S21| 2-f 0 200 400 600 800 1000 f (MHz) |S21| 2 (dB) |S12| 2-f -140 -120 -100 -80 -60 -40 -20 0 200 400 600 800 1000 f (MHz) |S12| (dB) S22 VGC=5V Vcc=5V

Weight: 0.02g (typ.)

/Gb7/G20TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. /Gb7/G20The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. /Gb7/G20The products described in this document are subject to the foreign exchange and foreign trade laws. /Gb7/G20The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. /Gb7/G20The information contained herein is subject to change without notice. 000707EBARESTRICTIONS ON PRODUCT USE