TA4017FT_07 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • High gain: |S21|2 = 13dB (@45 MHz)
  • Low distortion: IM3 = 42dB (@45 MHz)
  • Operating supply voltage: VCC = 4.75 V~5.25 V Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Supply voltage VCC 5.5 V Total power dissipation PD (Note 1) 300 mW Operating temperature Topr −40 to 85 °C Storage temperature Tstg −55 to 150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: When mounted on the glass epoxy of 2.5 cm 2 × 1.6 t Pin Assignment Weight: 0.0045g (typ.) U 5 5 4 1 2 3 IN (1) IN (2) V CC OUT (1) GND OUT (2)

Electrical Characteristics (Ta = 25°C, VCC = 5 V, Zg = Zl = 50 Ω) Characteristics Symbol Test Circuit Test Condition Min Typ. Max Unit Circuit current ICC Non Carrier 15 19 25 mA Band width BW (Note 2) 0.7 1 ⎯ GHz Input return loss |S11|2 f = 45 MHz ⎯ −0.8 ⎯ dB f = 45 MHz 10 13 16 Insertion gain |S21|2 f = 400 MHz ⎯ 12.5 ⎯ dB Isolation |S12| 2 f = 45 MHz ⎯ −40 ⎯ dB Output return loss |S22|2 f = 45 MHz ⎯ −3.5 ⎯ dB f = 45 MHz ⎯ 3 4.5 Noise figure NF f = 400 MHz ⎯ 3 ⎯ dB f = 45 MHz 0 2 ⎯ Output power at 1dB gain compression Po1dB f = 400 MHz ⎯ 2 ⎯ dBmW f1 = 45 MHz, f2 = 44 MHz, Pin = −20dBmW 34 42 ⎯ 3rd order inter modulation IM3 Fig1 f1 = 400 MHz, f2 = 399 MHz, Pin = −20dBmW ⎯ 42 ⎯ dB Note 2: BW is the frequency of 3dB down from |S21| 2 at 45 MHz. CAUTION: This device electrostatic sensitivity. Please handle with caution.

|S21| 2-f 0 200 400 600 800 1000 f (MHz) |S21| 2 (dB) |S12| 2-f -80 -70 -60 -50 -40 -30 -20 -10 0 200 400 600 800 1000 f (MHz) |S12| 2 (dB) Pin − Pout, IM3 Pin (dBmW) Pout, IM3 (dBmW) VCC = 5 V f = 44 MHz, 45 MHz Ta = 25°C −80 −45 −40 −5 −35 −60 −20 −10 −50 −70 −30 IM3 Pout S11 S22 NF-f 0 200 400 600 800 1000 f (MHz) NF (dB)

Weight: 0.0045g (typ.)

RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.