TA4012AFE TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

/Gb7/G20Low current: ICC = 6.5 mA /Gb7/G20Wide band: f = 2.0 GHz (3dB down) /Gb7/G20Operating supply voltage: VCC = 1.5~2.2 V Maximum Ratings (Ta /G3d/G3d/G3d/G3d 25°C) Characteristics Symbol Rating Unit Supply voltage 1 V CC1 2.2 V Supply voltage 2 (Note1) V CC2 3 V Total power dissipation (Note2) P D 300 mW Operating temperature T opr /G2d40~85 °C Storage temperature T stg /G2d55~150 °C Note1: When V CC is operated at less than 1/4 duty cycle Note2: When mounted on the glass epoxy of 2.5 cm 2 /Gb4 1.6 t Marking Weight: 0.003 g (typ.) OUT U 4 COLLECTOR VCC GND IN 5 4 1 2 3

Electrical Characteristics (Ta /G3d/G3d/G3d/G3d 25°C, Zg /G3d/G3d/G3d/G3d Zl /G3d/G3d/G3d/G3d 50 /G57/G57/G57/G57) Characteristics Symbol Test Condition Min Typ. Max Unit Circuit current I CC V CC /G3d 2 V, non carrier 4.5 6.5 8.5 mA Band width BW V CC /G3d 2 V (Note3) 1.8 2.0 /Gbe GHz Insertion gain /GefS21/Gef2 V CC /G3d 2 V, f /G3d 1.5 GHz 10 12 /Gbe dB Noise figure NF V CC /G3d 2 V, f /G3d 1.5 GHz /Gbe 6 7.5 dB Isolation /GefS12/Gef2 V CC /G3d 2 V, f /G3d 1.5 GHz /Gbe /G2d22 /Gbe dB Input return loss /GefS11/Gef2 V CC /G3d 2 V, f /G3d 1.5 GHz /Gbe /G2d6.5 /Gbe dB Output return loss /GefS22/Gef2 V CC /G3d 2 V, f /G3d 1.5 GHz /Gbe /G2d7.5 /Gbe dB Output power at 1 dB gain compression Po1dB V CC /G3d 2 V, f /G3d 1.5 GHz /Gbe 0 /Gbe dBmW Note3: BW is the frequency of 3dB down from /GefS21/Gef2 at 1.5 GHz. Caution This device is sensitive to electrostatic discharge. When using this device, please ensure that all tools and equipment are earthed. RF Test Circuit (top view) Notice The circuits and measurements contained in this document are given only in the context of as examples of applications for these products. Moreover, these example application circuits are not intended for mass production, since the high-frequency characteristics (the AC characteristics) of these devices will be affected by the external components which the customer uses, by the design of the circuit and by various other conditions. It is the responsibility of the customer to design external circuits which correctly implement the intended application, and to check the characteristics of the design. TOSHIBA assume no responsibility for the integrity of customer circuit designs or applications. Equivalent Circuit RF IN GND 100 pF 1000 pF 10000 pF L RF OUT 1000 pF 1000 pF L: 4 nh VCC

Weight: 0.003 g (typ.)

/Gb7/G20TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. /Gb7/G20The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. /Gb7/G20The products described in this document are subject to the foreign exchange and foreign trade laws. /Gb7/G20The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. /Gb7/G20The information contained herein is subject to change without notice. 000707EBARESTRICTIONS ON PRODUCT USE