DG11 SCHURTER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Power entry modules without line filter DG11https://www.schurter.com /PG05 Connectors IEC Appliance Inlet C14 or C18 with Circuit Breaker TA35 2-pole Screw-on with IP67 and TA35 in white with black printed symbols Screw-on with IP67 Snap-in IP40 with TA35 red illuminated and em- bossed symbols See below: Approvals and Compliances C14 70° C C18 70° C

Description

  • Panel mount : Screw-on version from front or rear side, snap-in version from front side - 2 Functions : Appliance Inlet , protection class I or II , Circuit breaker type TA35 , 2-pole - Pre-wired coupling - V-Lock notch standard - Quick connect terminal 6.3 x 0.8 mm Unique Selling Proposition - Variant tested for IP67 into the appliance - Various mounting options - Recessed rocker prevents accidental manipulation - Compatible with V-Lock cord retention Characteristics - Connector and circuit breaker are prewired - Circuit Breaker non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 Other versions on request - Version without pre-wiring from inlet to circuit breaker - Protection class II, 70°C - Variants in white References Substitute for type 6135 Component: circuit breakers TA35 Rocker 2Pole Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz Ratings UL/CSA 15 A / 250 VAC; 60 Hz Dielectric Strength > 2.5 kVAC between L-N > 3 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- rature -25 °C to 60 °C IP-Protection from front side IP40 or IP67 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal Quick connect terminals 6.3 x 0.8 mm Panel Thickness S Screw: max 8 mm Recommended torque min 0.25 Nm Snap-in : S =1/1.2/1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 UL 60320-1, CSA C22.2 no. 60320-1 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class I or II Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA 22.2 no. 235 2-pole rocker switch, illuminated or non- illuminated. Conditional short circuit Inc: 2000 A Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals

Power entry modules without line filterDG11 https://www.schurter.com /PG05 Connectors Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: DG11 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40048151 UL Approvals UL UL File Number: E96454 CQC Approvals CQC CCC Certificate Number: pending Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Dimensions [mm] Snap-in mounting for front mount IP40 R1.5 (51.6) 48.3 32.45 3.3 S 1622.1 5.35 5.65 max. R3 ±0.10 +0.20 +0.10 S = Panel thickness

Power entry modules without line filter DG11https://www.schurter.com /PG05 Connectors Screw-on mounting version A for front mount IP40 R1.5 32.45 1.2 ø 3.4 ø 6.2 3.348.3 (51.6) 1622.1 5.65 5.35 ±0.10 ±0.10 +0.20 ø 3.4/M3 max. R3 Screw-on mounting Version A for rear mount IP40 ø 3.4 R1.5 50.1 (51.6) 34.25 1.8 1.5 5.65 5.35 1622.1 ø 3.4/M3 ±0.10 57.2 ±0.10 max. R1 59.2 ±0.10 Screw-on mounting Version B for front mount IP40 5.65 5.35 22.1 161.2 ø 6.2 (51.6) 48.3 32.45 3.3 R1.5 ø 3.4 / M3 ±0.10 ±0.10 +0.20 max. R3

Power entry modules without line filterDG11 https://www.schurter.com /PG05 Connectors Screw-on mounting version B for rear mount IP40 R1.5 ø 3.4 50.1 (51.6) 1.8 1.534.25 5.65 5.35 1622.1 ±0.10 29.2 ±0.10 ø 3.4 / M3 max. R1 57.2 ±0.10 Screw-on mounting for front mount IP67 1622.1 5.65 5.35 3.332.45 (53.6) 50.3 34.3 ±0.10 ±0.10 ø 3.4/M3 max. R3 ±0.10 +0.20 Diagrams L N PE PE' L' P1 N' P2 1) 2) TA35 1) Line 2) Load Effect of ambient temperature The units are calibrated for an ambient temperature of +23°C. To determine the rated cur- rent for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient Temperature [°C] Correction factor -30 0.76 -20 0.81 0 0.90 +23 1.00 +40 1.03 +50 1.04 +60 1.06 Example: Rated current = 5 A, Environmental temperature = 50 °C --> Correction factor = 1.04, Resulting current = 5.2 A --> Fount to next higher rated current: 6 A

Power entry modules without line filter DG11https://www.schurter.com /PG05 Connectors Time-Current-CurvesTime in Seconds Typ p TA35 Nennstrom <3 A (TC-1,TC-2) Umgebungstemp. +23 °C 1,05 10854321,35 10'000 2\000 1\000 500 200 100 [ sec ][ min ] 0,5 0,3 0,2 0,1 Multiple of Rated Current In Reference Temperature +23° Time in Seconds 1,05 10854321,35 10'000 2\000 1\000 500 200 100 [ sec [ min ] 0,5 0,3 0,2 0,1 > 3–15A (TC-1, TC-2) Typ TA35 Nennstrom Umgebungs- temp. +23 °C Multiple of Rated Current In Reference Temperature +23°

Power entry modules without line filterDG11 https://www.schurter.com /PG05 Connectors Rated current In (A) Other rated currents on request In Code 1,0 J10 2,0 J20 4,0 040 5,0 050 6,0 060 In Code 8,0 080 10,0 100 12,0 120* 15,0 150* F 120 C0 No other

features

Surface Illustration Colour of print Rocker legend l ON OFF ON OFF ll Other legends on request Colours Switch front Rocker non-illuminated illuminated W black white – B black black – 3 black – red transparent 4 black – green transparent 6 black – orange transparent Other colours on request CBD WTA35- ORDER CODE Switch without CBT CBD illumination Switch illuminated 240 V C12 C32

120 V C14 C34

Table 1 Selection for type TA35 Order example LINE LOAD LINE LOAD Number of switched poles 2-pole Number of protected poles 1 2 *) UL / CSA only Position of the rocker legend e.g. I / O

Power entry modules without line filter DG11https://www.schurter.com /PG05 Connectors Typ Confi guration Code (Example) TA35 DG11 C B D W F 1 2 0 C 0 -000- C6135-XXX - XXX -00 see table 1 Confi guration Code Please note that Schurter will establish an internal part number for logistics use in addition to the order code. The format of this internal part number is, for example: 3-XXX-XXX Panel Mounting

00 Screw version A front mounting

01 Screw version B front mounting

02 Screw version A rear mounting

03 Screw version B rear mounting

10 Snap-in 1.0 mm 12 Snap-in 1.2 mm 15 Snap-in 1.5 mm 20 Snap-in 2.0 mm 25 Snap-in 2.5 mm 30 Snap-in 3.0 mm

88 Screw version front mounting

(sealed towards housing, IP65) Color

0 Black

Screw version A Screw version B Terminal PE

0 Without (PCII)

1 QC 6.3x0.8 mm Terminal L 1 QC 6.3x0.8 mm (unwired)

3 Connection to TA35 (wired)

1 QC 6.3x0.8 mm (unwired) Config. Code Order Number DG11-C126F100C0-000-C6135-331-200-00 3-107-924 █ DG11-CBDWM100C0-000-C6135-331-880-00 3-108-454 █ DG11-CBDBL100C0-000-C6135-331-010-00 3-108-463 █ DG11-CBDWM100C0-000-C6135-331-150-00 3-109-713 █ DG11-CBDWM100C0-000-C6135-331-010-00 3-109-714 █ DG11-CBDWM100C0-000-C6135-331-020-00 3-109-715 █ DG11-CBDWM150C0-000-C6135-331-150-00 3-109-716 █ DG11-CBDWM150C0-000-C6135-331-010-00 3-109-717 █ DG11-CBDWM150C0-000-C6135-331-020-00 3-109-718 █ DG11-CBDWM150C0-000-C6135-331-880-00 3-109-719 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 10 Pcs The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 23.07.2018