TPMC901 TEWS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.2.2 2018-03-05 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com The Embedded I/O Company TPMC901 6/4/2 Channel Extended CAN Bus
Application Information
The TPMC901 is a PCI Mezzanine Card (PMC) compatible module. The TPMC901-10R provides six independent CAN bus interfaces using six Bosch CC770F CAN Controllers. The CC770 offers pin compatibility with Intel's 82527 CAN Controller and is a function replacement. Additionally to the standard data and remote frame, all channels support the extended data and remote frame according to the CAN specification 2.0 part A and B (standard 11 bit identifier and extended 29 bit identifier). All channels have the capability to transmit, receive and perform message filtering on extended and standard messages. Each channel supports CAN High Speed according to ISO11898 as the physical interface. The bus line termination is selectable by a jumper separate for each bus line pair. The data transfer rates of up to 1 Mbps are supported for a bus line length of 40 m. The TPMC901-11R supports four CAN bus channels and the TPMC901-12R has two CAN bus channels. Software Support (TDRV011-SW -xx) for different operating systems is available. Technical Information Form Factor: Standard single-width 32 bit PMC module conforming to IEEE P1386/P1386.1 Board size: 149 mm x 74 mm PCI 2.2 (33 MHz) compliant interface 3.3V PCI signaling with 5V I/O tolerance CAN Bus interface based on CC770F CAN Controller Function replacement of Intel's 82527 Support of CAN specification 2.0 Part A and B (standard and extended data frames) Programmable global mask 15 message objects of 8 byte data length Powerful error handling Programmable transfer rates Physical interface CAN High Speed (according to ISO 11898) per channel Maximum transfer rate 1 Mbit/s (bus length up to 40m) Operating temperature -40°C to +85°C MTBF (MIL-HDBK217F/FN2 GB 20°C) TPMC901-10R: 621000 h TPMC901-11R: 632000 h TPMC901-12R: 645000 h
TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.2.2 2018-03-05 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com The Embedded I/O Company Order Information RoHS Compliant TPMC901-10R 6 x CAN Bus based on Bosch CC770, ISO11898 CAN High Speed, DB25 TPMC901-11R 4 x CAN Bus based on Bosch CC770, ISO11898 CAN High Speed, DB25 TPMC901-12R 2 x CAN Bus based on Bosch CC770, ISO11898 CAN High Speed, DB25 For the availability of non-RoHS compliant (leaded solder) products please contact TEWS. Documentation TPMC901-DOC User Manual Software TDRV011-SW-25 Integrity Software Support TDRV011-SW-42 VxWorks Software Support (Legacy and VxBus-Enabled Software Support) TDRV011-SW-65 Windows Software Support TDRV011-SW-82 Linux Software Support TDRV011-SW-95 QNX Software Support For other operating systems please contact TEWS.
Related Products
TA302 Cable Kit for modules with DB25 male connector