TAMC100 TEWS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
TAMC100 Carrier for 1 IndustryPack®
Application Information
The TAMC100 is a standard single width Mid-Size/Full-Size AMC.1 (PCI-Express) compliant c arrier for one single-size IndustryPack (IP) module used to build modular, flexible and cost effective I/O solutions for applications in process control, medical systems, telecommunication and traffic control. A HD50 SCSI -2 type connector provides access to all IP I/O lines. The TAMC100 is a versatile solution to upgrade well known legacy I/O solutions to a high performance form factor. All IP interrupt request lines are mapped to PCI e INTA. Alternatively Message Signaled Interrupts (MSI) can be used. For fast int errupt source detection the T AMC100 provides a special IP interrupt status register. The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40°C to +85°C. According to AMC.0, the TAMC 100 provides an IPMI compliant Module Management Controller (MMC) with temperature monitoring and hot-swap support. The TAMC100 is available as mid-size module or as full - size module. Please note that the mid-size module has restrictions to its usage because of a compon ent height violation. It is within the responsibility of the user to carefully check if the mid -size module with its component height violation can be used in his system . Otherwise damage of the TAMC100 or its slot to be used in may occur ! For more information see the user manual TAMC100-DOC. Technical Information Form Factor: PCIMG AMC.1 Module Board size: 180.6mm x 73.5mm Single width Mid-Size/Full-Size front panel Fabric Interface: PCIe single lane (x1) on AMC Port 4 (AMC.1 Type 1 compliant) IPMI V1.5 Support Front Panel LEDs: Blue Hot-Swap LED Red Fail LED (LED1) Green IP-Activity LED (LED 2) ANSI/VITA 4-1995 compliant interface to one IndustryPack module IndustryPack slot: one single-size 8/32 MHz interface, no DMA 8 Mbytes IP memory space Routing of all IP interrupts to PCIe INTA/MSI, local interrupt status register I/O access: HD50 SCSI-2 type connector Self Healing fuses and RF-filtering on all IP power lines Operating temperature: -40°C to +85°C MTBF (MIL-HDBK217F/FN2 GB 20°C): 633.000 h TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.1 2017-09-20 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com
TAMC100-10R AMC Carrier for 1 IndustryPack, Mid-Size front panel *) TAMC100-11R AMC Carrier for 1 IndustryPack, Full-Size front panel *) Please note that the mid-size module has restrictions to its usage because of a component height violation. It is within the responsibility of the user to carefully check if the mid-size module with its component height violation can be used in his system. Otherwise damage of the TAMC100 or its slot to be used in may occur! For more information see the user manual TAMC100-DOC For the availability of non-RoHS compliant (leaded solder) products please contact TEWS. Documentation TAMC100-DOC User Manual Software CARRIER-SW-42 VxWorks Software Support (Legacy and VxBus-enabled Software Support) CARRIER-SW-65 Windows XP/XPE/2000 Software Support CARRIER-SW-82 Linux Software Support CARRIER-SW-95 QNX 6 Software Support For other operating systems please contact TEWS.
Related Products
TA301 Cable Kit for Modules with HD50 connector TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice. All trademarks mentioned are property of their respective owners. Issue 1.0.1 2017-09-20 TEWS TECHNOLOGIES GmbH Am Bahnhof 7 25469 Halstenbek, Germany Phone: +49 (0) 4101 4058 0 Fax: +49 (0) 4101 4058 19 e-mail: info@tews.com www.tews.com