T90H1D12-24-18

T90S5D12-24 MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

02-2014, Rev. 0214 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Potter & Brumfield T90 Series, 30A PCB Relay Coil Data Coil voltage range 5 to 110VDC Max. coil power 1.0W Max. coil temperature 155°C Coil insulation system according UL Class F Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% wW 5 5 3.75 0.5 27 900 6 6 4.5 0.6 40 900 9 9 6.75 0.9 97 900 12 12 9 1.2 155 900 18 18 13.5 1.8 380 900 24 24 18 2.4 660 900 48 48 36 4.8 2560 900 110 110 82.5 11 13450 900 All figures are given for coil without preenergization, at ambient temperature +23°C. Ambient temperature vs. coil voltage – 1W coil Data graphed above are average values and should be verified in application. Tests were conducted within a 2’ (.6m) cube (still air); at nominal coil power @ 25°C; with normally open contact loaded; and with 4’ (1.22m) long, #10AWG load wires. P .C. board relays were mounted to a 30A, single side P .C. board. Coil rise test conducted with a 30A PC board to maintain 20°C max. rise at 30°C. The relay connections and wiring must be designed with an adequate cross section to ensure proper current flow and heat dissipation. After cleaning process knock-off nib should be removed for optimum life of wash-tight relays. n 30A, 1 form A (NO); 20A, 1 form C (CO) n Available as open frame or sealed construction n Meets UL 508 and 873 Spacing - 3.18 through air, 6.36 over surface n UL class F insulation system standard Typical applications HVAC, Appliances, Industrial Controls. Approvals UL E22575; CSA LR15734 Technical data of approved types on request. Contact Data Contact arrangement 1 form A (NO), 1 form B (NC), 1 form C (CO) Rated voltage 277VAC Max. switching voltage 277VAC Rated current 30A Limiting continuous current 30A Limiting making current 30A Limiting breaking current 30A Contact material AgCdO Min. recommended contact load 1A, 5VDC or 12VAC Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC Frequency of operation, with load 360hr Operate/release time max., including bounce 15/15ms Contact ratings Type Load Cycles Typical AgCdO, open style relay NO 30A, 240VAC, general purpose 100x103 NO 20A, 240VAC, resistive heater 100x103 CO 20A/10A, 240VAC, general purpose 100x103 CO 20A/10A, 28VDC, resistive 100x103 UL 508/873 AgCdO NO 30A, 240VAC, general purpose 100x103 NC 15A, 240VAC, general purpose 100x103 CO 20A/10A, 240VAC, general purpose 100x103 NO 20A, 240VAC, resistive 100x103 NC 15A, 240VAC, resistive 100x103 CO 20A/10A, 240VAC, resistive 100x103 NO 80LRA/30FLA, 240VAC 30x103 NC 30LRA/10FLA, 240VAC 30x103 CO 53.6LRA/20FLA / 20LRA/6.7FLA, 240VAC 100x103 NO 98LRA/22FLA, 120VAC 100x103 NO 2HP , 240VAC 1x103 NC 1/2HP , 240VAC 1x103 NO 1HP , 120VAC 1x103 NC 1/4HP , 120VAC 1x103 NO 6A, 277VAC, ballast 100x103 NC 3A, 277VAC, ballast 6x103 NO TV5, 240VAC, tungsten 6x103 NC TV3, 240VAC, tungsten 6x103 NO 20A, 28VDC, resistive 100x103 NC 10A, 28VDC, resistive 100x103 All ratings at 25°C (unless otherwise noted) with relay properly vented. Remove vent nib from enclosed relays after soldering and cleaning for optimum life. Mechanical endurance 10x106 ops. 130 120 110 100 2050 75 100 125 150 175 200 225 30A Load 25A Load 20A Load 15A Load 10A Load 0A Load 150 140 130 120 110 100 2050 75 100 125 150 175 200 225 Wash Tight Relay, Vented 0A Load 10A Load 30A Load 25A Load 20A Load 15A Load Open Style Relay, No Dust Cover Applied Continuous Coil Voltage (% of Rated Voltage) Coil Temp. Rise Above Ambient (°C) Applied Continuous Coil Voltage (% of Rated Voltage) Coil Temp. Rise Above Ambient (°C) General Purpose High Power PCB Relays

02-2014, Rev. 0214 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Potter & Brumfield T90 Series, 30A PCB Relay (Continued) Other Data (continued) Vibration resistance (functional) 1.65mm max excursions, 10-55 Hz Shock resistance (functional) 10g for 11msec Shock resistance (destructive) 100g Terminal type PCB-tht Weight 20g open relay 26g wash-tight relay Resistance to soldering heat THT IEC 60068-2-20 250°C Packaging/unit tray/50 pcs., box/500 pcs. 1) Operating ambient temperature must consider “Must Operate Voltage Change Over Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to cool) and Maximum Coil Temperature. Specification ambient considers 20A load with coil cooled to ambient. Insulation Data Initial dielectric strength between open contacts 1500Vrms between contact and coil 1500Vrms Initial insulation resistance between insulated elements 1x109Ω Clearance/creepage between contact and coil 3.17mm Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature DC coil -55ºC to 85ºC 1) Category of environmental protection IEC 61810 RT0 - open, RTIII - wash tight Dimensions T90N T90S Terminal assignment Bottom view on pins 1 form A 1 form B 1 form C PCB layout Bottom view on pins Only necessary terminals are present on single throw models and terminal code 4 models. Consequently, some holes will be unnecessary for those models. .045 x .045 (1.14 x 1.14) TERMINALS .025 x .025 (.64 x .64) TERMINALS .031 x .062 (.79 x 1.58) TERMINALS .680 MAX. (17.27) .130 .020 (3.3 .51) 1.20 MAX. (30.5) .950 MAX. (.8 x 1.6) TERMINALS .212 MAX. (5.38) .10 MAX. (2.54) .805 MAX. (20.4) .69 (17.6) 1.27 MAX. (32.26) 1.08 MAX. (27.43) .50 (12.8) .130 + .016 – .010 3.30 + .41 –.25( ) .016 (.43) .025 x .025 (.64 x .64) TERMINALS .045 x .045 (1.14 x 1.14) TERMINALS .078 ± .003 DIA. (1.98 ± .08).100 (2.54) .600 (15.24) .600 (15.24) .300 (7.62) .043 ± .003 DIA. (1.09 ± .08) .150 (3.81) .350 (8.89) .550 (13.97) .700 (17.78) .081 ± .005 DIA. (2.06 ± .13) .719 (18.26) 1.256 MAX. (31.9) .69 (17.5) .090 (2.29) 1.067 MAX. (27.1) .50 (12.7) .87 (22.1) Note: This terminal is not present on relays with terminal code 4. Accessory Optional plastic dust cover is a snap-on unit, open on the PC board side of the relay. The cover, when ordered with the relay, is shipped separately. It is designed to be snapped into place by the customer after the relay has been assembled to the PC board. Product Code Description Part Number 35C620A Black dust cover, for use on T90N relay 4-1393209-2 35C620A General Purpose High Power PCB Relays

02-2014, Rev. 0214 www.te.com © 2014 Tyco Electronics Corporation, a TE Connectivity Ltd. company. Catalog and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section. Catalog and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions Catalog product data, ‘Definitions’ section, application notes and all specifications are subject to change. Potter & Brumfield T90 Series, 30A PCB Relay (Continued) Potter & Brumfield Product code structure Typical product code T90 S 5 D 1 2 -24 Type T90 Power PCB relay T90 Enclosure N Open, no enclosure (snap-on dust cover available as an option) S Wash-tight, sealed plastic case with knock off nib for ventilation Contact arrangement 1 1 form A (1 NO) 2 1 form B (1 NC) 5 1 form C (1 CO) Coil Input D DC voltage Mounting and termination

1 PCB terminals

4 PCB terminals, no common terminal between coil terminals (see PCB layout/terminal assignment drawing)

Note: Terminal code 4 recommended for UL 873 applications. Consult factory for use of terminal code 1 for UL 873 applications. Contact material

2 AgCdO

Coil code: please refer to coil versions table Product Code Enclosure Contacts Terminals Contact Material Coil Part Number T90N1D12-5 open, no cover 1 form A, 1 NO PCB AgCdO 5 VDC 7-1393208-4 T90N1D12-9 9 VDC 7-1393208-5 T90N1D12-12 12 VDC 6-1393208-5 T90N1D12-18 18 VDC 6-1393208-8 T90N1D12-24 24 VDC 7-1393208-0 T90N1D12-48 48 VDC 7-1393208-3 T90N1D12-110 110 VDC 6-1393208-4 T90N1D42-12 PCB, no extra COM 12 VDC 7-1393208-7 T90N1D42-24 24 VDC 7-1393208-9 T90N5D12-5 1 form C, 1 CO PCB 5 VDC 9-1393208-5 T90N5D12-12 12 VDC 8-1393208-6 T90N5D12-18 18 VDC 9-1393208-0 T90N5D12-24 24 VDC 9-1393208-3 T90N5D12-48 48 VDC 9-1393208-4 T90N5D12-110 110 VDC 8-1393208-5 T90N5D42-12 PCB, no extra COM 12VDC 9-1393208-9 T90N5D42-24 24 VDC 1393209-2 T90S1D12-5 wash tight 1 form A, 1 NO PCB 5 VDC 1-1393209-8 T90S1D12-6 6 VDC 1-1393209-9 T90S1D12-9 9 VDC 2-1393209-0 T90S1D12-12 12 VDC 1-1393209-2 T90S1D12-18 18 VDC 1-1393209-3 T90S1D12-24 24 VDC 1-1393209-6 T90S1D42-12 PCB, no extra COM 12 VDC 2-1393209-2 T90S1D42-24 24 VDC 2-1393209-5 T90S1D42-48 48 VDC 2-1393209-6 T90S5D12-5 1 form C, 1 CO PCB 5 VDC 3-1393209-4 T90S5D12-12 12 VDC 2-1393209-8 T90S5D12-18 18 VDC 3-1393209-0 T90S5D12-24 24 VDC 3-1393209-1 T90S5D12-48 48 VDC 3-1393209-3 T90S5D42-12 PCB, no extra COM 12 VDC 1423094-1 T90S5D42-18 18 VDC 3-1393209-8 T90S5D42-24 24 VDC 4-1393209-0 General Purpose High Power PCB Relays

Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: T90S1D42-24 T90S5D42-24 T90S1D12-5 T90S1D12-6 T90S5D12-24 T90N5D12-24 T90N1D12-24 T90S1D12-

24 T90S1D12-12 T90N5D12-12 T90S5D12-12 T90N1D12-12 T90S5D12-5 T90N5D12-5 5-1393208-4 6-1393208-

4 6-1393208-6 7-1393208-2 7-1393208-4 7-1393208-8 8-1393208-1 8-1393208-4 8-1393208-5 8-1393208-9 9- 1393208-1 9-1393208-9 1393209-2 1-1393209-0 1-1393209-3 2-1393209-0 2-1393209-1 3-1393209-3 5- 1393209-0 T90S5D12-48 T90N1D12-110 T90N5D11-24 T90N5D12-110 T90S1D11-24 T90S1D12-18 T90S1D12-9 T90N1D42-12=T90 T90H1D12-24-08 T90H1D12-24-18 T90R1D12-12 T90R5D12-12 T90R5D12-24 T90N1D12- 18-05 T90N1D12-18 T90N1D12-48 T90N1D12-9 T90N1D42-12 T90N1D42-24 T90N1D42-24-01 T90N5D12-18 T90N5D12-48 T90N5D42-24-03 T90S1D12-110 T90S1D42-12 T90S1D42-48 T90S5D12-110 T90S5D12-18 T90S5D42-12 T90H5D12-20-01