BTB08 STMICROELECTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
Table 1: Main Features
DESCRIPTION
Available either in through-hole or surface-mount packages, the BTA08, BTB08 and T8 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applica- tions such as static relays, heating regulation, in- duction motor starting circuits... or for phase control operation in light dimmers, motor speed controllers,... The snubberless versions (BTA/BTB...W and T8 series) are specially recommended for use on inductive loads, thanks to their high commutation performances. Logic level versions are designed to interface directly with low power drivers such as microcontrollers. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 2500V RMS) complying with UL standards (file ref.: E81734). Symbol Value Unit IT(RMS) 8A VDRM/VRRM 600 and 800 V IGT (Q1) 5 to 50 mA BTA08, BTB08 and T8 Series 8A TRIACS REV. 6February 2006 SNUBBERLESS™, LOGIC LEVEL & STANDARD Table 2: Order Codes Part Number Marking BTA08-xxxxxRG See page table 8 on page 10 BTB08-xxxxxRG T8xx-xxxG T8xx-xxxH T8xx-xxxB G D2PAK (T8-G) GA2 G TO-220AB Insulated (BTA08) TO-220AB (BTB08) G IPAK (T8-H) G A2A1 G DPAK (T8-B)
BTA08, BTB08 and T8 Series Table 3: Absolute Maximum Ratings Tables 4: Electrical Characteristics (Tj = 25°C, unless otherwise specified) ■ SNUBBERLESS and Logic Level (3 quadrants) Symbol Parameter Value Unit IT(RMS) RMS on-state current (full sine wave) IPAK/D2PAK/ DPAK/TO-220AB Tc = 110°C TO-220AB Ins. Tc = 100°C ITSM Non repetitive surge peak on-state current (full cycle, Tj initial = 25°C) F = 50 Hz t = 20 ms 80 A F = 60 Hz t = 16.7 ms 84 I²tI ²t Value for fusing tp = 10 ms 36 A²s dI/dt Critical rate of rise of on-state cur- rent IG = 2 x IGT , tr ≤ 100 ns F = 120 Hz Tj = 125°C 50 A/µs IGM Peak gate current tp = 20 µs T j = 125°C 4A PG(AV) Average gate power dissipation Tj = 125°C 1W Tstg Tj Storage junction temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 °C Symbol Test Conditions Quad- rant T8 BTA08 / BTB08 Unit T810 T835 TW SW CW BW IGT (1) VD = 12 V RL = 30 Ω I - I I - I I I M A X . 1 03 5 5 1 03 55 0 m A VGT I - II - III MAX. 1.3 V VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C I - II - III MIN. 0.2 V IH (2) I T = 100 mA MAX. 15 35 10 15 35 50 mA IL IG = 1.2 IGT I - III MAX. 25 50 10 25 50 70 mA II 30 60 15 30 60 80 dV/dt (2) VD = 67 %VDRM gate open Tj = 125°C MIN. 40 400 20 40 400 1000 V/µs (dI/dt)c (2) (dV/dt)c = 0.1 V/µs Tj = 125°C MIN. 5.4 - 3.5 5.4 - - A/ms(dV/dt)c = 10 V/µs Tj = 125°C 2.8 - 1.5 2.98 - - Without snubber Tj = 125°C -4 . 5- -4 . 57
BTA08, BTB08 and T8 Series ■ Standard (4 quadrants) Table 5: Static Characteristics Table 6: Thermal resistance Symbol Test Conditions Quadrant BTA08 / BTB08 Unit CB IGT (1) VD = 12 V RL = 30 Ω I - II - III IV MAX. 25 100 mA VGT ALL MAX. 1.3 V VGD VD = VDRM RL = 3.3 kΩ Tj = 125°C ALL MIN. 0.2 V IH (2) I T = 500 mA MAX. 25 50 mA IL IG = 1.2 IGT I - III - IV MAX. 40 50 mA II 80 100 dV/dt (2) VD = 67 %VDRM gate open Tj = 125°C MIN. 200 400 V/µs (dV/dt)c (2) (dI/dt)c = 5.3 A/ms Tj = 125°C MIN. 5 10 V/µs Symbol Test Conditions Value Unit VT (2) I TM = 11 A tp = 380 µs T j = 25°C MAX. 1.55 V Vto (2) Threshold voltage Tj = 125°C MAX. 0.85 V Rd (2) Dynamic resistance Tj = 125°C MAX. 50 m Ω IDRM IRRM VDRM = VRRM Tj = 25°C MAX. 5µ A Tj = 125°C 1m A Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1. Symbol Parameter Value Unit Rth(j-c) Junction to case (AC) IPAK / D2PAK / DPAK / TO-220AB 1.6 °C/W TO-220AB Insulated 2.5 Rth(j-a) Junction to ambient S = 1 cm² D2PAK 45 °C/WS = 0.5 cm² DPAK 70 TO-220AB / TO-220AB Insulated 60 IPAK 100 S = Copper surface under tab.
BTA08, BTB08 and T8 Series In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com Table 8: Ordering Information Ordering type Marking Package Weight Base qty Delivery mode BTA/BTB08-xxxyzRG BTA/BTB08-xxxyz TO-220AB 2.3 g 50 Tube T8yy-xxxG T8yyxx D2PAK 1.5 g
50 Tube
T8yy-xxxG-TR T8yyxx 1000 Tape & reel T8yy-xxxB T8yyxx DPAK 0.3 g
75 Tube
T8yy-xxxB-TR T8yyxx 2500 Tape & reel T8yy-xxxH T8yyxx IPAK 0.4 g 75 Tube Note: xxx = voltage, yy = sensitivity, z = type Table 9: Revision History Date Revision Description of Changes Apr-2002 5A Last update. 13-Feb-2006 6 TO-220AB delivery mode changed from bulk to tube. ECOPACK statement added.
BTA08, BTB08 and T8 Series Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publicati on are subject to change without notice. This publication supersedes and replac es all information previously supplied. STMicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectro nics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Ital y - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America