T81331J BITECH | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Standard Resistance Range, Ohms 22 to 1Meg Standard Resistance Tolerance, at 25°C ±5% (J Tol.) Optional: ±2% (G Tol.) Operating Temperature Range -55°C to +125°C Temperature Coefficient of Resistance ±200ppm/°C Temperature Coefficient of Resistance Tracking ±50ppm/°C Maximum Operating Voltage 50Vdc or √PR Insulation Resistance ≥10,000 Megohms MECHANICAL Lead Material Steel Alloy Lead Finish Solder (90/10 Typical) Substrate Material 96% Alumina Resistor Material Cermet Body Material Conformal Epoxy Resin MODEL T SERIES Thick Film Super Low Profile SIP Resistor NetworksENVIRONMENTAL (PER MIL-R 83401, REV. D) Thermal Shock ∆R ±0.50% Short Time Overload ∆R ±0.50% Terminal Strength ∆R ±0.25% Moisture Resistance ∆R ±0.50% Mechanical Shock ∆R ±0.25% Vibration Shock ∆R ±0.25% Low Temperature Storage ∆R ±0.25% High Temperature Exposure ∆R ±0.50% Load Life, 1,000 Hours ∆R ±2.00% Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) ∆R ±0.25% Storage Temperature Range -55°C to +125°C Specifications subject to change without notice.
-55 0 70 125 Percent of Rated Power Ambient Temperature (°C) POWER DERATING CURVE POWER DISSIPATION, AT 70°C Model Per Package Per Resistor Tn-1 (n-1) x 0.100 0.100 Tn-3 (n-1) x 0.100 0.100 Tn-5 (n-1) x 0.100 0.060 4-64 Model T Series -3 Circuit (Isolated Resistors) & -1 Circuit (Bussed Resistors) Ohms Code Ohms Code Ohms Code 22 220 1K 102 27K 273 33 330 1.2K 122 33K 333 39 390 1.5K 152 39K 393 47 470 1.8K 182 47K 473 56 560 2K 202 56K 563 68 680 2.2K 222 68K 683 82 820 2.7K 272 82K 823 100 101 3.3K 332 100K 104 120 121 3.9K 392 120K 124 150 151 4.7K 472 150K 154 180 181 5.6K 562 180K 184 220 221 6.8K 682 220K 224 270 271 8.2K 822 270K 274 330 331 10K 103 330K 334 390 391 12K 123 390K 394 470 471 15K 153 470K 474 560 561 18K 183 560K 564 680 681 20K 203 680K 684 820 821 22K 223 820K 824 1Meg 105 Ohms Code Ohms Code Ohms Code R1/R2 R1/R2 R1/R2 R1/R2 R1/R2 R1/R2 180/390 181/391 330/390 331/391 3K/6.2K 302/622 220/270 221/271 330/470 331/471 220/330 221/331 330/680 331/681 STANDARD RESISTANCE VALUES, OHMS -5 Circuit (Dual Terminators) PACKAGING Standard: Plastic Bags Capacity = 200 Units APPLICABLE DOCUMENTS MIL-R-83401 — Resistor Networks, Fixed, Film, General Specifications MIL-STD-105 — Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 — Test Methods for Electronic and Electrical Component Parts
.020 ± .004 0.51 ± 0.10 .100 ± .010 2.54 ± 0.25 .010 ± .004 0.25 ± 0.10 .118 ± .020 3.50 ± 0.50 .138 3.50 Max. “L” Max. No. of Leads .098 2.50 Max. 1.40 35.56 1.30 33.02 1.20 30.48 1.10 27.94 1.00 25.40 .90 22.86 .80 20.32 .70 17.78 .60 15.24 .50 12.70 .40 10.16 Dim.“L” Max. 4# of Leads OUTLINE DIMENSIONS (Inch/mm) SCHEMATICS 1234 n -3 Circuit Isolated Resistors -5 Circuit Dual Terminator 1234 n1234 n -1 Circuit Bussed Resistors
ORDERING INFORMATION
No. of Leads: 4 thru 14 Circuit Type: 1 = Bussed 3 = Isolated 5 = Dual Terminator Tolerance Code: G = 2%(Optional) J = 5% (Standard) R2 Resistance Code: (Add for -5 circuit only.) Resistance Code: First 2 digits are significant . Last digit denotes number of trailing zeros. TYPICAL PART MARKING Model Name Date Code T8 - 1 - 103J 933 LogoLead #1 Indicator