T73 MACOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • 10 amp switching capacity.
  • UL Class F (155°C) coil insulation system standard.
  • 1 Form A and 1 Form C contact arrangements.
  • Ideal for domestic appliances, HVAC and security.
  • Resists high temperature and various chemical solutions.
  • Immersion cleanable, plastic sealed case available. Coil Data @ 20°C Voltage: 3 to 48VDC. Nominal Power: 450 milliwatts. 660 milliwatts for 48VDC coil. Coil Temperature Rise: 35C° max, at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. T73 series Low Profile, 10 Amp Printed Circuit Board Relay Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Weight: 0.42 oz. (12g). File E29244 File LR48471 Initial Insulation Resistance Between Mutually Insulated Elements: 108 ohms min. @ 500VDC. Ag contact rating. Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Operate Data @ 20°C Operate Time: 10 ms (excluding bounce). Release Time: 5 ms (excluding bounce). Environmental Data Temperature Range: Storage: -40°C to +130°C. Operating: -30°C to +80°C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 100g min. Operational: 10g min. Operating Humidity: 45 to 85% RH. Coil Data @ 20°C Rated Coil Coil Must Operate Must Release Voltage Resistance Voltage Voltage (VDC) (Ohms) +10% (VDC) (VDC) 3 20 1.95 0.15 5 56 3.25 0.25 6 80 3.90 0.30 9 180 5.85 0.45 12 320 7.80 0.60 18 720 11.7 0.90 24 1,150 15.6 1.20 48 3,500 31.2 2.40 Contact Data @ 20 °C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Max. Switching Rate: 240 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations. Minimum Load: 10mA @ 5VDC Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC. Contact Ratings @ 20°C with relay properly vented. Remove vent nib after soldering and cleaning. Contact Typical Ratings Type Operations Arrang. 1 & 5 1/3HP NO @ 240VAC Motor 30,000 10A NO @ 120VAC Resistive 100,000 6A NO @ 120VAC Resistive 100,000 6A NO @ 24VDC Resistive 100,000 10A/5A @ 120VAC Resistive 100,000 1/4HP NO @ 120VAC Motor Consult factory for other ratings. Figure 1 - Coil Temperature Rise Operate Time Life Expectancy Coil Power (W)Coil Power (W) Time (msec) T emp. Rise (Deg.) Release Time Operate Time 100 Contact Current (A) Operation (x 104) 4 6 8 10 120 120VAC Resistive 28VDC Resistive Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.

reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. P&B Catalog 1308242 Issued 3-03

Ordering Information

Typical Part Number B T73 S 5 D 1 5 -24 1. Basic Series: T73 = Miniature, printed circuit board relay. 2. Enclosure: V = Vented (Flux-tight)* S = Immersion cleanable, plastic sealed case. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO). 5 = 1 Form C (SPDT) 4. Coil Input: D = DC voltage. 5. Relay Type: 1 = Standard coil. 6. Contact Material: 5 = Silver-Cadmium Oxide 7. Coil Voltage: 03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC 05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC * Not suitable for immersion cleaning process. T73S5D15-05 T73S5D15-12 T73S5D15-24 Outline Dimensions .610 (15.5) .877 (22.3) .693 (17 .6) .122 (3.1) .067 (1 .7) 0.30 (7 .62

1 Form A

Wiring Diagrams (Bottom Views) Suggested PC Board Layouts (Bottom Views) .300 (7 .62) .200 (5.08) .700 (17 .8) 2 x .051 DIA. (1 .3) 2 x .039 DIA. (1 .0) 34 5

1 Form C 1 Form C

.300 (7 .62) .200 (5.08) .700 (17 .8) 3 x .051 DIA. (1 .3) .500 (12.7) 2 x .039 DIA. (1 .0) 34 5 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.