T72M

T72M MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• 20 A, 16 V switching rating - 60 A inrush at 16 V - 15 A continuous contact rat- ing at 105 °C - Immersion cleanable plastic case with nipp-off pin for ventilation - Low profile package has a seated height of only 0.67" (17 mm) Typical applications - Lighting controls - Power door locks, windows, sunroof - Seat controls - Remote keyless entry - Body computer - Wiper/washer control - ABS/Traction control - Body control modules - Power sliding door Please contact Tyco Electronics for relay application support. Design Sealed, immersion cleanable Weight Approx. 0.4 oz. (12 g) Nominal voltage

6 V, 12 V or 24 V

PCB terminals, for assembling in printed circuit boards Conditions All parametric, environmental and endurance tests are performed according to EIA Standard RS-407-A at standard test conditions unless otherwise noted: 23 °C ambient temperature, (998.9 ±33.9 hPa). Please also refer to the Application Recommendations in this catalog for general precautions. Disclaimer All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and to request our technical service. Any responsibility for the application of the product remains with the customer only. All speci fications are subject to change without notification. All rights of Tyco are reserved.

Please observe the disclaimer. Catalog 1308028 Revision 03-06 Revision 03-05 Dimensional drawing .03 MAX. (.76) .140 ± .020 (3.5 ± .51) ø .040 (1.02) .10 MIN. (2.5) SOLDER .081 (2.06)4 x .020 x .045 MAX. (.51 x 1.14) .89 MAX. (22.5) .65 MAX. (16.5) .67 MAX. (17.0) ECR2200-Q ø .052 TYP . (1.3) .480 (12.2) .472 (12.0) .236 (6.0) .079 (2.0) ECR2201-Y View of the terminals (Bottom view) Mounting holes View of the terminals (Bottom view)

Please observe the disclaimer. Catalog 1308028 Revision 03-06 Revision 03-05 Contact data Typical areas of application Contact configuration Circuit symbol (see also Pin assignment) Rated voltage Rated current at 85 °C Contact material Max. switching voltage/power Max. switching current On2) Off Min. recommended load4) Voltage drop at 10 A (initial) Mechanical endurance (without load) Electrical endurance (example of resistive load) Max. switching rate at nominal load 1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 13.5 V for 12 V or 27 V for 24 V load voltages. 2) For a load current duration of maximum 3 s for a make/break ratio of 1:10. 3) Corresponds to a peak inrush current on initial actuation (cold filament). 4) See chapter Diagnostics in our Application Recommendations on page 18 of this catalog or consult the internet at http://relays. tycoelectronics.com/application.asp Resistive / inductive loads Indicator / lamp loads Changeover contact/ Form C 12 V NC/NO 10/20 A AgNi0.15 AgSnO 2 See load limit curve NC/NO NC/NO

12 A/60 A 15 A/80 A 3)

20 A/20 A 20 A/20 A

1 A at 5 V

Typ. 50 mV, 300 max. for NC/NO contacts > 107 operations 105 operations at 20 A, 14 V, resisitive load on NO contact 6 operations per minute (0.1 Hz) Load limit curve Pin assignment 100 W 0.5 1 23 4 5 7 10 12 20 Switching Current (A) Switching Voltage (VDC)

200 W250 W

320 W40 W

Safe breaking, arc extinguished (normally open contact) for resistive loads. 1 changeover contact/ 1 form C ECR2204-N

Please observe the disclaimer. Catalog 1308028 Revision 03-06 Revision 03-05 Ambient temperature vs. coil voltage for continuous duty 140 120 100 80 90 100 110 120 130 140 150 160 170 180 190 200 Applied Coil Voltage (% of Nominal Voltage) Maximum Allowable Ambient Temperature (°C)

0 A Contact Load

10 A Contact Load

15 A Contact Load

20 A Contact Load

Available for nominal voltages 6, 12, 24 V Nominal power consumption of the unsuppressed coil at nominal voltage 0.8 W Test voltage winding/contact 500 VACrms Maximum ambient temperature range1) – 40 to + 105 °C Operate time at nominal voltage 5 ms Release time at nominal voltage2) 2 ms 1) See also diagram Ambient temparature vs. coil voltage for continuous duty. 2) Measured at nominal voltage without coil suppression unit. N.B. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher risk of contact tack welding. Assumptions: 1. Still air 2. Nominal coil resistance 3. Maximum mean coil temperature = 155 ˚C 4. Coil temperature rise due to load = 8 °C at 10 A = 20 °C at 15 A 35.5 °C at 20 A 5. Curves are based on nominal coil power at 23 °C 6. When full lifetime is at high ambient and high load current, subtract 25 °C from maximum allowable ambient temperature. Mechanical data Audible sound (14 V coil voltage) 95 dBA at 10 cm 77 dBA at 1 m Enclosures Sealed relay is suitable for immersion cleaning of PCB assembly. Sealed Please refer to the Application Recommendations in this catalog. Relay may be vented after cleaning by cutting the vent protection from the corner of the relay after processing using a razor knife or equivalent. Operating conditions Temperature range, storage Refer to Storage in the “Glossary” Test Relevant standard Testing as per Dimension Comments Vibration resistance 1.27 mm double amplitude 10-40 Hz Valid for NC contacts. 5 g constant 40-70 Hz NO contacts are 0.5 mm double amplitude 70-100 Hz significantly higher 10 g constant 100-500 Hz Shock resistance half sine pulse form 11 ms No change in the 20 g switching state > 1 ms Jump start 24 V for 5 minutes conducting nominal current at 23 °C Drop test Capable of meeting specifications after 1.0 m (3.28 foot) drop onto concrete in final enclosure Flammability UL94-HB or better (meets FMVSS 302)

Please observe the disclaimer. Catalog 1308028 Revision 03-06 Revision 03-05

Ordering information

Standard delivery packs (orders in multiples of delivery pack) T72M: 1000 pieces Coil Rated coil Coil resistance Must Must Allowable overdrive 1) data for voltage +/- 10% operate voltage release voltage voltage (V) T72M (V) ( Ω) (V) (V) at 23 °C at 105 °C 1) Allowable overdrive is stated with 10A load current flowing through the relay contacts and minimum coil resistance with power a pplied for 30 s max. (20% max. duty cycle). Part numbers (see table below for coil data) Contact Contact Enclosure Terminals Relay part number Tyco order number arrangement material T72M5D121-12 0-1393289-9 1 Form C AgNi0.15 Sealed, plastic cover Printed circuit T72M5D155-12 2-1393289-4 1 Form C AgNi0.15 Sealed, plastic cover Printed circuit