T6ARS3505M RECTRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

TRANSIENT VOLTAGE SUPPRESSORS GPP BRIDGE RECTIFIER VOLTAGE RANGE 600 to 1000 Volts CURRENT 35 Amperes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. T6ARS3505M THRU T6ARS3507M MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TC = 55 o C (With Heat-sink) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) SYMBOL VRRM VDC IFSM TJ, TSTG VRMS UNITS Volts Volts Amps35

300 Amps

Peak Power Dissipation at TA=25OC,TP=1mS (Note 1) PPPM Maximum 600 Watts Maximum Peak Pulse Current IPPM 1.1 Amps Breakdown Voltage Range at IT=1mA VBR 380 ~ 420 Volts Maximum Clamping Voltage at IPPM =1.1A VC 548 Volts

0 COperating and Storage Temperature Range

-55 to + 150 Volts T6ARS3505M 800 T6ARS3506M 800 560 1000 T6ARS3507M T6ARS3505M T6ARS3506M T6ARS3507M 1000 700 600 600 420 2007-7 CHARACTERISTICS at Rated DC Blocking Voltage VF SYMBOL IR uAmps Maximum DC Reverse Current Maximum Instantaneous Forward Voltage at 17.5A DC Volts 5.0 @TA = 100 o C @TA = 25 o C 1.1 200 UNITS NOTES : 1. Non-repetitive current pulse, per Fig.8 and derated above TA=25OC per Fig.7. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". Dimensions in inches and (millimeters)

FEATURES

  • Low leakage * Low forward voltage * Surge overload rating : 300 amperes peak * Mounting position: Any * Ideal for printed circuit boards * High forward surge current capability MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O * UL list the recognized component directory,file #E94233 RS-35M .106 (2.7) .096 (2.3) .087 (2.2) .071 (1.8) .043 (1.1) .035 (0.9) .303 (7.7) .287 (7.3) .303 (7.7) .287 (7.3) .402 (10.2) .386 (9.8) .031 (0.8) .023 (0.6) .114 (2.9) .098 (2.5) .189 (4.8) .173 (4.4) .150 (3.8) .134 (3.4) 1.193 (30.3) 1.169 (29.7) f .138 (3.5) .126 (3.2) .441 (11.2) .425 (10.8) .708 (18.0) .669 (17.0) .800 (20.3) .697 (17.7)

RATING AND CHARACTERISTICS CURVES ( T6ARS3505M THRU T6ARS3507M ) AVERAGE RECTIFIED FORWARD CURRENT, (A) NUMBER OF CYCLE POWER DISSIPATION, (W) INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 0.5 0.2 2 10 20 5010 100 200 300 5 100 FIG.3 SURGE FORWARD CURRENT CAPABILITY FIG.1 TYPICAL INSTANTANEOUS FORWARD CHARACTERITICS FIG.2 POWER DISSIPATION AMBIENT TEMPERATURE, (OC) PEAK FORWARD SURGE CURRENT, (A) 8040 120 160 FIG.4 TYPICAL FORWARD CURRENT DERATING CURVE HEAT SINK TEMPERATURE, (OC) AVERAGE FORWARD CURRENT, (A) 30 50 70 90 110 130 150 170 FIG.5 TYPICAL FORWARD CURRENT DERATING CURVE MOUNTING TORQUE (kg.cm) THERMAL RESISTANCE (OC/W) 0.2 0.4 0.6 0.8 1.0 1.2 3 4 5 6 7 8 FIG.6 CONTACT THERMAL RESISTANCE fcf Pulse test per one diode TC= 150OC (TYP) TC= 25OC (TYP) non-repetitive Tj=25 1 cycle 8.3ms 8.3ms IFSM sine wave on glass-epoxi substrate P.C.B soldering land 5mmf sine wave R-load free in air heatsink Tc Tc sine wave R-load on heatsink with thermal compound sine wave TJ = 150 O C

AMBIENT TEMPERATURE, ( O PEAK PULSE POWER OR CURRETN DERATING IN PERCENTAGE, (%) PULSE WIDTH,(S) 100 PEAK PULSE POWER, (KW) 0.1 1.0 100 1007525 50 150 175125 2000.1u 1.0u 10u 100u 1m 10u RATING AND CHARACTERISTICS CURVES ( T6ARS3505M THRU T6ARS3507M ) FIG.7 PEAK PULSE POWER RATING CURVE FIG.8 PULSE DERATING CURVE Non-Repetitive Pulse Waveform Shown in Fig.9 TA=25 O C TIME, (mS) 0 1.00 100 150 3.02.0 4.0 FIG.9 PULSE WAVEFORM PEAK PULSE CURRENT, (%) tr = 10usec. Peak Value IPPM td 10/1000usec. Waveform as Defined by R.E.A. HALF VALUE - IPPM Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM V(BR), BREAKDOWN VOLTAGE, (V) CJ, CAPACITANCE, (pF) 1.0 100 1000 100000 10000 10 100 200 FIG.10 TYPICAL JUNCTION CAPACITANCE TJ= 25 O C f = 1MHz Vsig = 50mVp-p Measured at Zero Bias Stand off Voltage,VWM Measured at Schematic

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE