T60402-C4615-X065 VACUUMSCHMELZE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

V A C U U M S C H M E L Z E DATENBLATT / specification Sach Nr.: Item no.: T60402-C4615-X065 K-Nr.: K-no.: 25877 Gegentaktübertrager / Push Pull Transformer Datum: Date: 14.10.2011 Kunde: Customer Kd. Sach Nr.: Customers part no.: Seite 1 von 2 Page of Hrsg.: KB-E editor Bearb: designer Ockajak KB-PM: Leh. check freig.: HS released Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden. Any offenders are liable to pay all relevant damages. Maßbild (mm): Freimaßtoleranz DIN ISO 2768-c Mechanical outline General tolerances 4 7 22,5 Toleranz der Stiftabstände ±0,2mm Tolerances grid distance) DC=DateCode F=Factory DC F 0,7x0,7 22,5 3,5-0,5 2,5 Kennzeichnung Stift 1 (marking pin 1) 10,16 Prüfmaß (test dimension) ≤ 20 20,32 20,32 Anschlußschema: Schematic diagram ü = 44 : 15 : 15 Betriebsdaten/Charakteristische Daten (Richtwerte): Operational data/characteristic data (nominal values): UE = 75 V (N 1) Nennwerte am Verbraucher (U/I): N 2 / N 3: 24V / 1,75A Rated voltage and current at the load (U/I): N2 / N 3: 24V / 1,75A (N2 und N3 können einzeln den Gesamtstrom führen) N2 and N3 can individually cause the total current ) f = 100 kHz, τ ≤ 0,48, P ü = 42 W ∫Udt: ≥ 340 µ Vs (N1 unipolar) LS = 9µH (N2 or N3 short circuited), f = 100kHz, U AC,rms = 100mV CK = 10 pF, f = 1kHz, U AC,rms = 100mV Max. Betriebstemperatur / max. operating temperature: 120° C 1 Umgebungstemperatur/ ambient temperature: -40° C...+70° C Lagertemperatur/ storage temperature: -40° C...+85° C Prüfung: (V: 100%-Test; AQL...: DIN ISO 2859-Teil1) Inspection 1) (V) M3014: U p,eff = 2,2 kV, 2 s, N1 gegen/ vs N2+N3 Up,eff = 0,5 kV, 2 s, N2 gegen/ vs N3 2) (AQL 0,25) M3024: U p,eff = 2,2 kV 2 s, N1 gegen/ vs N2+N3 UTA,eff ≥ 1,8 kV 3) (AQL 0,25) M3011/4: Einstellwerte/ Settings (N1) UE = 17 V, t d = 20 µs, f p = 1 kHz Prüfwert/ Test value Ip ≤ 55 mA 4) (V) M3011/6: Polarität / Übersetzungsverhäl tnis: Toleranz ± 1% ( ± 0 Wdg.) Polarity / Turns ratio: Tolerance 5) (AQL 1/S4) M3011/5: R Cu1 ≤ 330 m Ω , R Cu2 ≤ 100 m Ω , R Cu3 ≤ 100 m Ω 6) (AQL 1/S4) M3200: Mechanische Prüfung / Mechanical test Siehe Seite 2/See page 2 Weitere Vorschriften: Applicable documents: Siehe Seite 2 See page 2 Datum Name Index Änderung Anschlüsse: Connections: DC 4615X065 F Beschriftung: marking

V A C U U M S C H M E L Z E DATENBLATT / specification Sach Nr.: Item no.: T60402-C4615-X065 K-Nr.: K-no.: 25877 Gegentaktübertrager / Push Pull Transformer Datum: Date: 14.10.2011 Kunde: Customer Kd. Sach Nr.: Customers part no.: Seite 2 von 2 Page of Hrsg.: KB-E editor Bearb: designer Ockajak KB-PM: Leh. check freig.: HS released Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder GM-Eintragung vorbehalten Copying of this document, disclosing it to third parties or using the contents there for any purposes without express written authorization by use illegally forbidden. Any offenders are liable to pay all relevant damages. Typprüfung: Type test: 1) Stoßspannungsprüfung in Anlehnung an M3064 HV transient test according to M3064 N1 gegen/ vs N2+N3 Einstellwerte: 1,2 µs / 50 µs-Kurvenform (waveform) Settings U P,max = 8 kV R i = 60 Ω

10 Impulse im Abstand t = 10 Sekunden mit wechsel nder Polarität

10 pulses in a cycle of t = 10 seconds with changing polarity 2) Hochspannungsprüfung in Anlehnung an M3024 High voltage test according to M3014 U p,eff = 4,4 kV, 1 min, N1 gegen/ vs N2+N3 U TA,eff ≥ 1,8 kV Messungen nach Temperaturangleich der Prüflinge an Raumtemperatur Measurements after temperature balance of the test samples at room temperature Weitere Vorschriften: Applicable documents: Gehäusewerkstoff, Gießharz und Draht UL-gelistet Housing material, casting resin and wire UL – liste d

1 Für UL-Anwendungen nach UL508C beträgt die maxima le Betriebstemperatur 105° C

For UL-application acc. UL508C the maximum operating temperature is 105° C.