T-60 TOTAL-POWER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
.LOW COST, HIGH RELIABILITY .COMPACT SIZE, LIGHT WEIGHT .105ºC OUTPUT CAPACITOR .100% FULL LOAD BURN -IN TEST .INTERNATIONAL AC INPUT RANGE .HIGH EFFICIENCY, LOW WORKING TEMPERATURE .SOFT-START CIRCUIT, LIMITING AC SURGE CURRENT .SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED MODEL SPECIFICATION T-60A T-60B T-60C CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3 DC OUTPUT VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V OUTPUT V. TOLERANCE ±2% ±6% ±6% ±2% ±6% ±6% ±2% ±6% ±6% RIPPLE & NOISE(Vp-p) 100m 100m 100m 100m 100m 100m 100m 100m 100m LOAD REGULATION ±1% ±4% ±1% ±1% ±4% ±1% ±1% ±4% ±1% RATED OUTPUT POWER 57.5W 61W 62.5W EFFICIENCY 72% 72% 72% DC VOLTAGE ADJ. CH1:+10,-5% CH1:+10,-5% CH1:+10,-5% INPUT VOLTAGE RANGE 85~264VAC 47~63Hz ; 120~370VDC AC CURRENT 2A/115V 1A/230V INRUSH CURRENT COLD START 30A/115V 60A/230V LEAKAGE CURRENT <1mA/240VAC OVERLOAD PROTECTION 105%~150%/115VAC TYPE:PULSING HICCUP SHUTDOWN RESET:AUTO RECOVERY OVER VOLTAGE PROTECTION CH1:5.75~6.75V TEMP. COEFFICIENT ±0.03% / ºC (0~50ºC) ON +5V OUTPUT SETUP,RISE,HOLD UP TIME 800ms, 50ms, 10ms / 115VAC 300ms, 50ms, 80ms / 230VAC VIBRATION 10~500Hz, 2G 3AXES 10min. / 1cycle ( 1 HOUR / EACH AXES ) WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P -FG:1.5KVAC O/P -FG:0.5KVAC 1min. ISOLATION RESISTANCE I/P-O/P,I/P-FG,O/P -FG:500VDC / 100M Ohms WORKING TEMP., HUMIDITY -10ºC~+60ºC(REFER TO OUTPUT DERATING CURVE), 20%~90% RH STORAGE TEMP., HUMIDITY -20ºC~+85ºC, 10%~95% RH DIMENSION 159*97*38mm CASE:901 WEIGHT 0.56Kgs SAFETY STANDARDS UL1012, TUV EN60950, IEC950, UL1950 APPROVED EMC STANDARDS CISPR22(EN55022) CLASS B, IEC801 -2,3,4, IEC555 -2 VERIFICATION NOTE : 1.ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT. 2.TOLERANCE GINCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION. 3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR. 4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD. 5.LOAD REGULATION IS MEASURED FROM 20% TO 100% RATED LOAD, AND OTHER OUTPUT AT 60% RATED LOAD 6.EACH OUTPUT PROVIDE UP TO MAXIMUM CURRENT, BUT TOTAL LOAD CAN NOT EXCEED MAX. OUTPUT POWER. 7.C23,6 MUST BE REMOVED.