T543

Kemet Corporation

T543 Up-Screen Commercial Polymer Electrolytic, 2.5 ??63 VDC

Manufacturer: Kemet Corporation

Document: 29 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Kemet Corporation Browse T parts

Online Datasheet

Read T543 online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 29

Technical content

1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Benefits

Extremely low ESR
Hi gh frequency capacitance retention
10 0% accelerated steady state aging
10 0% surge current tested
Ta pe & Reel standard packaging per EIA 481
Volumetrically e fficienct
Surge o ptions a t 2 5°C a nd − 55°C/+85°C
EI A standard case sizes
Ha logen-free epoxy and RoHS compliant Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric efficiency o f t antalum i nto a s ingle s urface m ount p ackage. Unl ike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple current capabilities. The T543 COTS Polymer Electrolytic capacitor is an upscreened version of the industrial T520 KO-CAP . The T543's upscreened option includes surge current testing of c ycles a t + 25°C a nd 1 0 c ycles a t - 55°C/+85°C. I n a ddition to 1 00% Tin (Sn) terminations, a tin-lead (SnPb) option is also available. The recommended application derating for these capacitors is 10 – 20%, rendering them suitable for application voltages from 2.25 to 50 VDC. KEMET Organic Capacitor (KO-CAP®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC

Applications

Typical applications include DC/DC converters, switch mode and point of load power supply, radar pulse capacitor, and telecommunications ( mobile p hone a nd b ase s tation). O ther g eneral a pplications i nclude d ecoupling a nd fi ltering i n ap plications requiring low ESR or a benign failure mode. When extreme temperatures and humidity are taken into account, polymer tantalum capacitors offer a number of advantages over other types of capacitors, when used in extreme environments. KEMET continues to investigate the behavior of polymer tantalum capacitors in extreme conditions. If you have questions about using these capacitors in a s pecific e nvironment o r a pplication, w e s uggest y ou c ontact y our l ocal r epresentative o r fi eld a pplication e ngineer t o di scuss th e s pecific d etails o f y our a pplication ( see “ Considerations f or P olymer C apacitors i n E xtreme E nvironments” lo cated at www.kemet.com/ExtremePolymerPaper).

2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.

Ordering Information

T 543 D 156 K 035 A H E 100 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish Surge ESR Packaging (C-Spec) T = Tantalum Polymer Tantalum COTS A,B, C, D, H, L, M, O, T, U, V, W, X, Y First two digits represent si gnificant fig ures. T hird d igit sp ecifies n umber o f ze ros. K = ±10% M = ±20% 2R5 = 2.5 003 = 3 004 = 4 006 = 6.3 010 = 10 12R = 12.5 016 = 16 020 = 20 025 = 25 035 = 35 040 = 40 050 = 50 063 =63 A = N/A H = Standard solder coated (SnPb 5% Pb minimum) T = 100% tin (Sn) E = None S = 10 cycles 25°C W = 10 cycles −55°C a nd ESR in mΩ Blank = 7" reel 7280 = 13" reel 7610 = Bulk Bag 7640 = Bulk plastic box WAFL = W affle pac k Performance Characteristics Item Performance Characteristics Operating Temperature −55°C t o 1 05°C/125°C ( refer t o p art n umber f or m aximum t emperature r ating) Rated Capacitance Range 4.7 – 2 ,000 μ F a t 1 20 H z/25°C Capacitance Tolerance K tolerance (10%), M tolerance (20%) Rated Voltage Range 2.5 – 63 V DF (120 Hz) Refer t o P art N umber E lectrical S pecification T able ES R (100 kHz) Refer t o P art N umber E lectrical S pecification T able Le akage Current ≤ 0 .1 C V ( µA) a t r ated vo ltage a fter 5 m inutes

3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Qualification Test Condition Characteristics Endurance 105°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours Δ C /C Within − 20/+10 o f i nitial v alue DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Storage Life 105°C at 0 volts, 2,000 hours 125°C at 0 volts, 2,000 hours Δ C /C Within − 20/+10 o f i nitial v alue DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Humidity 60°C, 90% RH, 500 hours Δ C /C Within − 5%/+35% o f i nitial v alue DF Within initial limits DCL Within 5.0 x initial limit ESR Within 2.0 x initial limit Temperature Stability Extreme temperature exposure at a succession of continuous steps at 25°C, − 55°C, + 25°C, + 85°C, 05°C/+125°C**, + 25° C Δ C DF IL IL 1.2 x IL 1.5 x IL DCL IL N/A 10 x IL 10 x IL Surge Voltage 105°C, 1.32 x rated voltage, 1,000 cycles Δ C /C Within − 20/+10 o f i nitial v alue DF Within initial limits DCL Within initial limits ESR Within initial limits Mechanical Shock/ Vibration MIL –STD–202, Method 213, Condition I, 100 G peak MIL –STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Δ C /C Within ±10 of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit **Refer to part number specifications for individual temperature classification

4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, U C, and category temperature, TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 hours or 2,000 hours) is dependent on the product. The actual life expectancy of KO-CAP capacitors increases when application voltage, U A, and application temperature, TA, are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85°C, the life expectancy will typically exceed the useful lifetime of most hardware (> 10 years). The l ifetime o f a K O-CAP c apacitor a t a s pecific a pplication v oltage a nd t emperature c an b e m odeled u sing th e e quations be low. A f ailure i s d efined a s p assing e nough c urrent t o b low a 1 -amp f use. T he c alculation i s a n e stimation b ased o n em pirical results and is not a guarantee. TAF = e[ ( )] Ea k 273+TA 273+TC TAF = acceleration factor due to temperature, unitless where: Ea = activation energy, 1.4 eV k = Boltzmann’s constant, 8.617E-5 eV/K TA = application temperature, °C TC = category temperature, °C VAF = ( ) UC UA n VAF = acceleration factor due to voltage, unitless where: UC = category voltage, volt UA = application voltage, volt n = exponent, 16 AF = VAF * TAF AF = acceleration factor, unitless where: TAF = accerlation factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless * AFLifeUA ,TA = LifeUC ,TC LifeUA, TA = guaranteed life application voltage and temperature, years where: AF = acceleration factor, unitless LifeUC, TC = guaranteed life category voltage and temperature, years Terms: Category voltage, U C : maximum recommended peak DC operating voltage for continuous operation at the category temperature, T C Rated voltage, U R : maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, T R Category temperature, T C : maximum recommended operating temperature. Voltage derating may be required at T C Rated temperature, T R : maximum recommended operating temperature without voltage derating. T R is equal to or lower than TC Reliability Table 1 – Common temperature range classifications 85°C (TR) / 85°C (TC) 105°C (TR) / 105°C (TC) 105°C (TR) / 125°C (TC)

5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC

Electrical Characteristics

ESR vs. Frequency Capacitance vs. Frequency 0.001 0.01 0.1 100 100 1,000 10,000 100,000 1, 000,000 10,000,000 Impedance, ESR (Ohms) Frequency (Hz) T5430B157M006ATE035_Imp T543C227M006ATE025_Imp T543V337M006ATE015_Imp T543D337M006ATE009_Imp T543B157M006ATE035_ESR T543C227M006ATE025_ESR T543V337M006ATE015_ESR T543D337M006ATE009_ESR 100 1,000 100 1,000 10,000 100,000 1, 000,000 10,000,000 Capacitance (µF) Frequency (Hz) T543B157M006ATE035 T543C227M006ATE025 T543V337M006ATE015 T543D337M006ATE009

6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Dimensions – Millimeters H X T B B G F E A L R P SIDE VIEW ANODE (+) END VIEW BOTTOM VIEWCATHODE (-) END VIEW W S S Termination cutout at KEMET's option, either end Glue pad shape/design at KEMET's option Case Size Component Dimensions Typical Weight KEMET EIA L W H F ±0.1 ±(0.004) S ±0.3 ±(0.012) B ±0.15 (Ref) ±0.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) (mg) A 3216–18 3.2±0.2 (0.126±0.008) 1.6±0.2 (0.063 ±0.008) 1.6±0.2 (0.063±0.008) 1.2 (0.047) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 (0.004±0.004) 0.4 (0.016) 0.4 (0.016) 0.13 (0.005) 1.2 (0.047) 1.1 (0.043) 1.3 (0.051) 53.17 B 3528–21 3.5±0.2 (0.138±0.008) 2.8±0.2 (0.110±0.008) 1.9±0.2 (0.075±0.008) 2.2 (0.087) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 (0.004±0.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) 98.30 C 6032–28 6.0±0.3 (0.236±0.012) 3.2±0.2 (0.126±0.008) 2.5±0.3 (0.098±0.012) 2.2 (0.087) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.1 (0.122) 2.8 (0.110) 2.4 (0.094) 193.46 D 7343–31 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 2.8±0.3 (0.110±0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 352.36 H 7360–20 7.3±0.3 (0.287±0.012) 6.0±0.3 (0.236±0.012) 1.9±0.1 (0.075±0.004) 4.1 (0.161) 1.3 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 366.62 L 6032–19 6.0±0.3 (0.236±0.012) 3.2±0.2 (0.110±0.008) 1.8±0.1 (0.071±0.004) 2.2 (0.087) 1.3 (0.051) N/A 0.05 (0.005) 3.1 (0.122) 2.8 (0.110) 2.4 (0.094) No data M 3528–15 3.5±0.2 (0.138±0.008) 2.8±0.2 (0.110±0.008) 1.4±0.1 (0.055±0.004) 2.2 (0.087) 0.8 (0.031) N/A 0.05 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) 97.99 O 7360-43 7.3±0.3 (0.287±0.012) 6.0±0.3 (0.236±0.012) 4.0±0.3 (0.157±0.012) 4.1 (0.161) 1.3 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 696.00 T 3528–12 3.5±0.2 (0.138±0.008) 2.8±0.2 (0.110±0.008) 1.1±0.1 (0.043±0.004) 2.2 (0.087) 0.8 (0.031) N/A 0.05 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) 59.38 U 6032–15 6.0±0.3 (0.236±0.012) 3.2±0.2 (0.110±0.008) 1.4±0.1 (0.055±0.004) 2.2 (0.087) 1.3 (0.051) N/A 0.05 (0.005) 3.1 (0.122) 2.8 (0.110) 2.4 (0.094) No data V 7343–20 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 1.9±0.1 (0.075±0.004) 2.4 (0.094) 1.3 (0.051) N/A 0.05 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 262.90 W 7343–15 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 1.4±0.1 (0.055 ±0.004) 2.4 (0.094) 1.3 (0.051) N/A 0.05 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 222.94 X 7343–43 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 4.0±0.3 (0.157±0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 588.16 Y 7343–40 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 3.8±0.2 (0.150±0.008) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 481.55 Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P, or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative.

7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/

5 Minutes

% at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 2.5 47 A/3216-18 T543A476(1)2R5A(2)(3)090 12 8 90 1,116 105 3 2.5 56 T/3528-12 T543T566(1)2R5A(2)(3)040 14 8 40 1,620 105 3 2.5 56 T/3528-12 T543T566(1)2R5A(2)(3)070 14 8 70 1,225 105 3 2.5 68 A/3216-18 T543A686(1)2R5A(2)(3)070 17 8 70 1,265 105 3 2.5 68 A/3216-18 T543A686(1)2R5A(2)(3)080 17 8 80 1,183 105 3 2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)040 25 8 40 1,620 105 3 2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)070 25 8 70 1,225 105 3 2.5 100 T/3528-12 T543T107(1)2R5A(2)(3)080 25 8 80 1,146 105 3 2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)025 25 8 25 2,254 105 3 2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)035 25 8 35 1,905 105 3 2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)040 25 8 40 1,782 105 3 2.5 100 B/3528-21 T543B107(1)2R5A(2)(3)070 25 8 70 1,347 105 3 2.5 150 U/6032-15 T543U157(1)2R5A(2)(3)055 38 8 55 1,567 105 3 2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)025 55 8 25 2,254 105 3 2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)030 55 8 30 2,058 105 3 2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)035 55 8 35 1,905 105 3 2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)055 55 8 55 1,520 105 3 2.5 220 B/3528-21 T543B227(1)2R5A(2)(3)070 55 8 70 1,347 105 3 2.5 220 U/6032-15 T543U227(1)2R5A(2)(3)055 55 8 55 1,567 105 3 2.5 220 C/6032-28 T543C227(1)2R5A(2)(3)025 55 8 25 2,569 105 3 2.5 220 C/6032-28 T543C227(1)2R5A(2)(3)045 55 8 45 1,915 105 3 2.5 220 W/7343-15 T543W227(1)2R5A(2)(3)025 55 10 25 2,683 105 3 2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)015 55 10 15 3,531 105 3 2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)025 55 10 25 2,735 105 3 2.5 220 V/7343-20 T543V227(1)2R5A(2)(3)045 55 10 45 2,039 105 3 2.5 220 D-7343-31 T543D227(1)2R5A(2)(3)040 55 10 40 2,372 105 3 2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)035 83 8 35 1,905 105 3 2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)045 83 8 45 1,680 105 3 2.5 330 B/3528-21 T543B337(1)2R5A(2)(3)070 83 8 70 1,347 105 3 2.5 330 L/6032-19 T543L337(1)2R5A(2)(3)012 83 8 12 3,536 105 3 2.5 330 L/6032-19 T543L337(1)2R5A(2)(3)025 83 8 25 2,449 105 3 2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)015 83 8 15 3,317 105 3 2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)018 83 8 18 3,028 105 3 2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)025 83 8 25 2,569 105 3 2.5 330 C/6032-28 T543C337(1)2R5A(2)(3)045 83 8 45 1,915 105 3 2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)015 83 10 15 3,464 105 3 2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)025 83 10 25 2,683 105 3 2.5 330 W/7343-15 T543W337(1)2R5A(2)(3)040 83 10 40 2,121 105 3 2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)015 83 10 15 3,531 105 3 2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)018 83 10 18 3,223 10 5 3 2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)025 83 10 25 2,735 105 3 2.5 330 V/7343-20 T543V337(1)2R5A(2)(3)040 83 10 40 2,162 105 3 2.5 330 D-7343-31 T543D337(1)2R5A(2)(3)006 83 10 6 6,124 105 3 2.5 330 D-7343-31 T543D337(1)2R5A(2)(3)007 83 10 7 5,669 105 3 2.5 330 D-7343-31 T543D337(1)2R5A(2)(3)025 83 10 25 3,000 105 3 2.5 470 C/6032-28 T543C477(1)2R5A(2)(3)025 118 8 25 2,569 105 3 2.5 470 C/6032-28 T543C477(1)2R5A(2)(3)045 118 8 45 1,915 105 3 2.5 470 V/7343-20 T543V477(1)2R5A(2)(3)018 118 10 18 3,223 105 3 2.5 470 D-7343-31 T543D477(1)2R5A(2)(3)005 118 10 5 6,708 105 3 2.5 470 D-7343-31 T543D477(1)2R5A(2)(3)006 118 10 6 6,124 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL

8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 2.5 470 D-7343-31 T543D477(1)2R5A(2)(3)007 118 10 7 5,669 105 3 2.5 470 D-7343-31 T543D477(1)2R5A(2)(3)009 118 10 9 5,000 105 3 2.5 470 D-7343-31 T543D477(1)2R5A(2)(3)010 118 10 10 4,743 105 3 2.5 470 D-7343-31 T543D477(1)2R5A(2)(3)025 118 10 25 3,000 105 3 2.5 560 D-7343-31 T543D567(1)2R5A(2)(3)005 140 10 5 6,708 105 3 2.5 680 D-7343-31 T543D687(1)2R5A(2)(3)006 170 10 6 6,124 125 3 2.5 680 D-7343-31 T543D687(1)2R5A(2)(3)010 170 10 10 4,743 125 3 2.5 680 D-7343-31 T543D687(1)2R5A(2)(3)015 170 10 15 3,873 125 3 2.5 680 D-7343-31 T543D687(1)2R5A(2)(3)040 170 10 40 2,372 125 3 2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)005 170 10 5 6,943 105 3 2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)006 170 10 6 6,338 105 3 2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)010 170 10 10 4,909 105 3 2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)015 170 10 15 4,008 105 3 2.5 680 Y/7343-40 T543Y687(1)2R5A(2)(3)025 170 10 25 3,105 105 3 2.5 680 X/7343-43 T543X687(1)2R5A(2)(3)006 170 10 6 6,416 105 3 2.5 1,000 Y/7343-40 T543Y108(1)2R5A(2)(3)005 250 10 5 6,943 105 3 2.5 1,000 Y/7343-40 T543Y108(1)2R5A(2)(3)006 250 10 6 6,338 105 3 2.5 1,000 Y/7343-40 T543Y108(1)2R5A(2)(3)010 250 10 10 4,909 105 3 2.5 1,000 Y/7343-40 T543Y108(1)2R5A(2)(3)015 250 10 15 4,008 105 3 2.5 1,000 Y/7343-40 T543Y108(1)2R5A(2)(3)025 250 10 25 3,105 105 3 2.5 1,000 X/7343-43 T543X108(1)2R5A(2)(3)005 250 10 5 7,029 105 3 2.5 1,000 X/7343-43 T543X108(1)2R5A(2)(3)006 250 10 6 6,416 105 3 2.5 1,000 X/7343-43 T543X108(1)2R5A(2)(3)010 250 10 10 4,970 105 3 2.5 1,500 X/7343-43 T543X158(1)2R5A(2)(3)005 375 10 5 7,029 105 3 2.5 1,500 X/7343-43 T543X158(1)2R5A(2)(3)010 375 10 10 4,970 105 3 3 100 B/3528-21 T543B107(1)003A(2)(3)035 30 8 35 1,905 105 3 3 100 B/3528-21 T543B107(1)003A(2)(3)040 30 8 40 1,782 105 3 3 100 B/3528-21 T543B107(1)003A(2)(3)070 30 8 70 1,347 105 3 3 100 B/3528-21 T543B107(1)003A(2)(3)080 30 8 80 1,260 105 3 3 150 B/3528-21 T543B157(1)003A(2)(3)035 45 8 35 1,905 105 3 3 150 B/3528-21 T543B157(1)003A(2)(3)040 45 8 40 1,782 105 3 3 150 B/3528-21 T543B157(1)003A(2)(3)070 45 8 70 1,347 105 3 3 150 B/3528-21 T543B157(1)003A(2)(3)080 45 8 80 1,260 105 3 3 330 V/7343-20 T543V337(1)003A(2)(3)015 99 10 15 3,531 105 3 3 330 V/7343-20 T543V337(1)003A(2)(3)025 99 10 25 2,735 105 3 3 330 D-7343-31 T543D337(1)003A(2)(3)025 99 10 25 3,000 105 3 3 470 D-7343-31 T543D477(1)003A(2)(3)010 141 10 10 4,743 105 3 3 470 D-7343-31 T543D477(1)003A(2)(3)025 141 10 25 3,000 105 3 3 680 D-7343-31 T543D687(1)003A(2)(3)010 204 10 10 4,743 125 3 3 680 D-7343-31 T543D687(1)003A(2)(3)015 204 10 15 3,873 12 5 3 3 680 D-7343-31 T543D687(1)003A(2)(3)025 204 10 25 3,000 125 3 3 680 D-7343-31 T543D687(1)003A(2)(3)040 204 10 40 2,372 125 3 3 1,000 X/7343-43 T543X108(1)003A(2)(3)010 300 10 10 4,970 105 3 3 1,000 X/7343-43 T543X108(1)003A(2)(3)015 300 10 15 4,058 105 3 3 1,000 X/7343-43 T543X108(1)003A(2)(3)030 300 10 30 2,869 105 3 3 1,500 X/7343-43 T543X158(1)003A(2)(3)008 450 10 8 5,557 125 3 3 2,000 O/7360-43 T543O208M003A(2)(3)010 600 10 10 5,480 105 3 4 15 T/3528-12 T543T156(1)004A(2)(3)100 6 8 100 1,025 105 3 4 33 A/3216-18 T543A336(1)004A(2)(3)070 13 8 70 1,265 105 3 4 33 A/3216-18 T543A336(1)004A(2)(3)080 13 8 80 1,183 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL

9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 4 47 A/3216-18 T543A476(1)004A(2)(3)070 19 8 70 1,265 105 3 4 47 A/3216-18 T543A476(1)004A(2)(3)080 19 8 80 1,183 105 3 4 47 T/3528-12 T543T476(1)004A(2)(3)070 19 8 70 1,225 105 3 4 68 T/3528-12 T543T686(1)004A(2)(3)070 27 8 70 1,225 105 3 4 68 T/3528-12 T543T686(1)004A(2)(3)080 27 8 80 1,146 105 3 4 68 B/3528-21 T543B686(1)004A(2)(3)035 27 8 35 1,905 105 3 4 68 B/3528-21 T543B686(1)004A(2)(3)040 27 8 40 1,782 105 3 4 68 B/3528-21 T543B686(1)004A(2)(3)070 27 8 70 1,347 105 3 4 68 B/3528-21 T543B686(1)004A(2)(3)080 27 8 80 1,260 105 3 4 68 U/6032-15 T543U686(1)004A(2)(3)055 27 8 55 1,567 105 3 4 100 A/3216-18 T543A107(1)004A(2)(3)150 40 8 150 864 105 3 4 100 A/3216-18 T543A107(1)004A(2)(3)200 40 8 200 748 105 3 4 100 T/3528-12 T543T107(1)004A(2)(3)070 40 8 70 1,225 105 3 4 100 T/3528-12 T543T107(1)004A(2)(3)150 40 8 150 837 105 3 4 100 B/3528-21 T543B107(1)004A(2)(3)035 40 8 35 1,905 105 3 4 100 B/3528-21 T543B107(1)004A(2)(3)040 40 8 40 1,782 105 3 4 100 B/3528-21 T543B107(1)004A(2)(3)070 40 8 70 1,347 105 3 4 100 B/3528-21 T543B107(1)004A(2)(3)080 40 8 80 1,260 105 3 4 100 U/6032-15 T543U107(1)004A(2)(3)055 40 8 55 1,567 105 3 4 150 B/3528-21 T543B157(1)004A(2)(3)035 60 8 35 1,905 105 3 4 150 B/3528-21 T543B157(1)004A(2)(3)040 60 8 40 1,782 105 3 4 150 B/3528-21 T543B157(1)004A(2)(3)070 60 8 70 1,347 105 3 4 150 U/6032-15 T543U157(1)004A(2)(3)055 60 8 55 1,567 105 3 4 150 C/6032-28 T543C157(1)004A(2)(3)015 60 8 15 3,317 105 3 4 150 C/6032-28 T543C157(1)004A(2)(3)025 60 8 25 2,569 105 3 4 150 C/6032-28 T543C157(1)004A(2)(3)045 60 8 45 1,915 105 3 4 150 C/6032-28 T543C157(1)004A(2)(3)100 60 8 100 1,285 105 3 4 150 V/7343-20 T543V157(1)004A(2)(3)015 60 10 15 3,531 105 3 4 150 V/7343-20 T543V157(1)004A(2)(3)025 60 10 25 2,735 105 3 4 220 B/3528-21 T543B227(1)004A(2)(3)035 88 8 35 1,905 105 3 4 220 B/3528-21 T543B227(1)004A(2)(3)045 88 8 45 1,680 105 3 4 220 B/3528-21 T543B227(1)004A(2)(3)070 88 8 70 1,347 105 3 4 220 L/6032-19 T543L227(1)004A(2)(3)012 88 8 12 3,536 105 3 4 220 L/6032-19 T543L227(1)004A(2)(3)025 88 8 25 2,449 105 3 4 220 C/6032-28 T543C227(1)004A(2)(3)015 88 8 15 3,317 105 3 4 220 C/6032-28 T543C227(1)004A(2)(3)018 88 8 18 3,028 105 3 4 220 C/6032-28 T543C227(1)004A(2)(3)025 88 8 25 2,569 105 3 4 220 C/6032-28 T543C227(1)004A(2)(3)045 88 8 45 1,915 105 3 4 220 C/6032-28 T543C227(1)004A(2)(3)055 88 8 55 1,732 105 3 4 220 W/7343-15 T543W227(1)004A(2)(3)025 88 10 25 2,683 10 5 3 4 220 W/7343-15 T543W227(1)004A(2)(3)040 88 10 40 2,121 105 3 4 220 V/7343-20 T543V227(1)004A(2)(3)015 88 10 15 3,531 105 3 4 220 V/7343-20 T543V227(1)004A(2)(3)018 88 10 18 3,223 105 3 4 220 V/7343-20 T543V227(1)004A(2)(3)025 88 10 25 2,735 105 3 4 220 V/7343-20 T543V227(1)004A(2)(3)040 88 10 40 2,162 105 3 4 220 V/7343-20 T543V227(1)004A(2)(3)045 88 10 45 2,039 105 3 4 220 D-7343-31 T543D227(1)004A(2)(3)025 88 10 25 3,000 105 3 4 220 D-7343-31 T543D227(1)004A(2)(3)065 88 10 65 1,861 105 3 4 330 C/6032-28 T543C337(1)004A(2)(3)025 132 8 25 2,569 105 3 4 330 C/6032-28 T543C337(1)004A(2)(3)045 132 8 45 1,915 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.

10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 4 330 V/7343-20 T543V337(1)004A(2)(3)018 132 10 18 3,223 105 3 4 330 V/7343-20 T543V337(1)004A(2)(3)025 132 10 25 2,735 105 3 4 330 V/7343-20 T543V337(1)004A(2)(3)040 132 10 40 2,162 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)005 132 10 5 6,708 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)006 132 10 6 6,124 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)007 132 10 7 5,669 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)009 132 10 9 5,000 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)010 132 10 10 4,743 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)012 132 10 12 4,330 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)015 132 10 15 3,873 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)025 132 10 25 3,000 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)040 132 10 40 2,372 105 3 4 330 D-7343-31 T543D337(1)004A(2)(3)045 132 10 45 2,236 105 3 4 470 D-7343-31 T543D477(1)004A(2)(3)006 188 10 6 6,124 105 3 4 470 D-7343-31 T543D477(1)004A(2)(3)010 188 10 10 4,743 105 3 4 470 D-7343-31 T543D477(1)004A(2)(3)012 188 10 12 4,330 105 3 4 470 D-7343-31 T543D477(1)004A(2)(3)015 188 10 15 3,873 105 3 4 470 D-7343-31 T543D477(1)004A(2)(3)018 188 10 18 3,536 105 3 4 470 D-7343-31 T543D477(1)004A(2)(3)025 188 10 25 3,000 105 3 4 470 D-7343-31 T543D477(1)004A(2)(3)040 188 10 40 2,372 105 3 4 470 Y/7343-40 T543Y477(1)004A(2)(3)005 188 10 5 6,943 125 3 4 470 Y/7343-40 T543Y477(1)004A(2)(3)006 188 10 6 6,338 125 3 4 470 Y/7343-40 T543Y477(1)004A(2)(3)010 188 10 10 4,909 125 3 4 470 Y/7343-40 T543Y477(1)004A(2)(3)025 188 10 25 3,105 125 3 4 470 Y/7343-40 T543Y477(1)004A(2)(3)040 188 10 40 2,455 125 3 4 680 D-7343-31 T543D687(1)004A(2)(3)025 272 10 25 3,000 125 3 4 680 Y/7343-40 T543Y687(1)004A(2)(3)005 272 10 5 6,943 105 3 4 680 Y/7343-40 T543Y687(1)004A(2)(3)010 272 10 10 4,909 105 3 4 680 Y/7343-40 T543Y687(1)004A(2)(3)015 272 10 15 4,008 105 3 4 680 Y/7343-40 T543Y687(1)004A(2)(3)025 272 10 25 3,105 105 3 4 680 X/7343-43 T543X687(1)004A(2)(3)005 272 10 5 7,029 125 3 4 680 X/7343-43 T543X687(1)004A(2)(3)006 272 10 6 6,416 125 3 4 680 X/7343-43 T543X687(1)004A(2)(3)010 272 10 10 4,970 125 3 4 680 X/7343-43 T543X687(1)004A(2)(3)015 272 10 15 4,058 125 3 4 680 X/7343-43 T543X687(1)004A(2)(3)035 272 10 35 2,657 125 3 4 1,000 X/7343-43 T543X108(1)004A(2)(3)006 400 10 6 6,416 105 3 4 1,000 X/7343-43 T543X108(1)004A(2)(3)010 400 10 10 4,970 105 3 4 1,500 O/7360-43 T543O158M004A(2)(3)010 600 10 10 5,480 105 3 6.3 15 T/3528-12 T543T156(1)006A(2)(3)100 9 8 100 1,025 105 3 6.3 22 A/3216-18 T543A226(1)006A(2)(3)090 14 8 90 1,116 10 5 3 6.3 22 A/3216-18 T543A226(1)006A(2)(3)100 14 8 100 1,058 105 3 6.3 33 A/3216-18 T543A336(1)006A(2)(3)070 21 8 70 1,265 105 3 6.3 33 A/3216-18 T543A336(1)006A(2)(3)080 21 8 80 1,183 105 3 6.3 33 A/3216-18 T543A336(1)006A(2)(3)120 21 8 120 966 105 3 6.3 33 T/3528-12 T543T336(1)006A(2)(3)070 21 8 70 1,225 105 3 6.3 33 B/3528-21 T543B336(1)006A(2)(3)025 21 8 25 2,254 105 3 6.3 33 B/3528-21 T543B336(1)006A(2)(3)035 21 8 35 1,905 105 3 6.3 33 B/3528-21 T543B336(1)006A(2)(3)040 21 8 40 1,782 105 3 6.3 33 B/3528-21 T543B336(1)006A(2)(3)070 21 8 70 1,347 105 3 6.3 33 B/3528-21 T543B336(1)006A(2)(3)080 21 8 80 1,260 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL

11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 6.3 33 C/6032-28 T543C336(1)006A(2)(3)100 21 8 100 1,285 105 3 6.3 47 A/3216-18 T543A476(1)006A(2)(3)150 30 8 150 864 105 3 6.3 47 T/3528-12 T543T476(1)006A(2)(3)070 30 8 70 1,225 105 3 6.3 47 T/3528-12 T543T476(1)006A(2)(3)080 30 8 80 1,146 105 3 6.3 47 B/3528-21 T543B476(1)006A(2)(3)025 30 8 25 2,254 125 3 6.3 47 B/3528-21 T543B476(1)006A(2)(3)035 30 8 35 1,905 105 3 6.3 47 B/3528-21 T543B476(1)006A(2)(3)040 30 8 40 1,782 105 3 6.3 47 B/3528-21 T543B476(1)006A(2)(3)070 30 8 70 1,347 105 3 6.3 47 B/3528-21 T543B476(1)006A(2)(3)080 30 8 80 1,260 105 3 6.3 68 A/3216-18 T543A686(1)006A(2)(3)150 43 8 150 864 105 3 6.3 68 T/3528-12 T543T686(1)006A(2)(3)070 43 8 70 1,225 105 3 6.3 68 T/3528-12 T543T686(1)006A(2)(3)150 43 8 150 837 105 3 6.3 68 B/3528-21 T543B686(1)006A(2)(3)025 43 8 25 2,254 105 3 6.3 68 B/3528-21 T543B686(1)006A(2)(3)035 43 8 35 1,905 105 3 6.3 68 B/3528-21 T543B686(1)006A(2)(3)040 43 8 40 1,782 105 3 6.3 68 B/3528-21 T543B686(1)006A(2)(3)070 43 8 70 1,347 105 3 6.3 68 B/3528-21 T543B686(1)006A(2)(3)080 43 8 80 1,260 105 3 6.3 68 U/6032-15 T543U686(1)006A(2)(3)055 43 8 55 1,567 105 3 6.3 68 U/6032-15 T543U686(1)006A(2)(3)070 43 8 70 1,389 105 3 6.3 68 C/6032-28 T543C686(1)006A(2)(3)100 43 8 100 1,285 105 3 6.3 100 T/3528-12 T543T107(1)006A(2)(3)070 63 8 70 1,225 105 3 6.3 100 B/3528-21 T543B107(1)006A(2)(3)025 63 8 25 2,254 105 3 6.3 100 B/3528-21 T543B107(1)006A(2)(3)035 63 8 35 1,905 105 3 6.3 100 B/3528-21 T543B107(1)006A(2)(3)040 63 8 40 1,782 105 3 6.3 100 B/3528-21 T543B107(1)006A(2)(3)045 63 8 45 1,680 105 3 6.3 100 B/3528-21 T543B107(1)006A(2)(3)070 63 8 70 1,347 105 3 6.3 100 U/6032-15 T543U107(1)006A(2)(3)055 63 8 55 1,567 105 3 6.3 100 C/6032-28 T543C107(1)006A(2)(3)025 63 8 25 2,569 105 3 6.3 100 C/6032-28 T543C107(1)006A(2)(3)045 63 8 45 1,915 105 3 6.3 100 W/7343-15 T543W107(1)006A(2)(3)040 63 10 40 2,121 105 3 6.3 100 V/7343-20 T543V107(1)006A(2)(3)015 63 10 15 3,531 105 3 6.3 100 V/7343-20 T543V107(1)006A(2)(3)045 63 10 45 2,039 105 3 6.3 120 B/3528-21 T543B127(1)006A(2)(3)035 76 8 35 1,905 105 3 6.3 150 M/3528-15 T543M157(1)006A(2)(3)070 95 8 70 1,309 105 3 6.3 150 M/3528-15 T543M157(1)006A(2)(3)150 95 8 150 894 105 3 6.3 150 B/3528-21 T543B157(1)006A(2)(3)025 95 8 25 2,254 105 3 6.3 150 B/3528-21 T543B157(1)006A(2)(3)035 95 8 35 1,905 105 3 6.3 150 B/3528-21 T543B157(1)006A(2)(3)045 95 8 45 1,680 105 3 6.3 150 B/3528-21 T543B157(1)006A(2)(3)070 95 8 70 1,347 105 3 6.3 150 U/6032-15 T543U157(1)006A(2)(3)045 95 8 45 1,732 10 5 3 6.3 150 U/6032-15 T543U157(1)006A(2)(3)055 95 8 55 1,567 105 3 6.3 150 L/6032-19 T543L157(1)006A(2)(3)012 95 8 12 3,536 105 3 6.3 150 L/6032-19 T543L157(1)006A(2)(3)025 95 8 25 2,449 105 3 6.3 150 C/6032-28 T543C157(1)006A(2)(3)015 95 8 15 3,317 105 3 6.3 150 C/6032-28 T543C157(1)006A(2)(3)025 95 8 25 2,569 105 3 6.3 150 C/6032-28 T543C157(1)006A(2)(3)045 95 8 45 1,915 105 3 6.3 150 C/6032-28 T543C157(1)006A(2)(3)055 95 8 55 1,732 105 3 6.3 150 W/7343-15 T543W157(1)006A(2)(3)025 95 10 25 2,683 105 3 6.3 150 W/7343-15 T543W157(1)006A(2)(3)040 95 10 40 2,121 105 3 6.3 150 V/7343-20 T543V157(1)006A(2)(3)015 95 10 15 3,531 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.

12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 6.3 150 V/7343-20 T543V157(1)006A(2)(3)018 95 10 18 3,223 105 3 6.3 150 V/7343-20 T543V157(1)006A(2)(3)025 95 10 25 2,735 105 3 6.3 150 V/7343-20 T543V157(1)006A(2)(3)040 95 10 40 2,162 105 3 6.3 150 V/7343-20 T543V157(1)006A(2)(3)045 95 10 45 2,039 105 3 6.3 150 D-7343-31 T543D157(1)006A(2)(3)015 95 10 15 3,873 105 3 6.3 150 D-7343-31 T543D157(1)006A(2)(3)025 95 10 25 3,000 105 3 6.3 150 D-7343-31 T543D157(1)006A(2)(3)055 95 10 55 2,023 105 3 6.3 220 B/3528-21 T543B227(1)006A(2)(3)035 139 8 35 1,905 105 3 6.3 220 B/3528-21 T543B227(1)006A(2)(3)045 139 8 45 1,680 105 3 6.3 220 B/3528-21 T543B227(1)006A(2)(3)070 139 8 70 1,347 105 3 6.3 220 C/6032-28 T543C227(1)006A(2)(3)015 139 8 15 3,317 105 3 6.3 220 C/6032-28 T543C227(1)006A(2)(3)018 139 8 18 3,028 105 3 6.3 220 C/6032-28 T543C227(1)006A(2)(3)025 139 8 25 2,569 105 3 6.3 220 C/6032-28 T543C227(1)006A(2)(3)045 139 8 45 1,915 105 3 6.3 220 V/7343-20 T543V227(1)006A(2)(3)018 139 10 18 3,223 105 3 6.3 220 V/7343-20 T543V227(1)006A(2)(3)025 139 10 25 2,735 105 3 6.3 220 V/7343-20 T543V227(1)006A(2)(3)040 139 10 40 2,162 105 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)005 139 10 5 6,708 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)006 139 10 6 6,124 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)007 139 10 7 5,669 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)009 139 10 9 5,000 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)010 139 10 10 4,743 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)015 139 10 15 3,873 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)018 139 10 18 3,536 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)025 139 10 25 3,000 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)040 139 10 40 2,372 125 3 6.3 220 D-7343-31 T543D227(1)006A(2)(3)050 139 10 50 2,121 125 3 6.3 330 V/7343-20 T543V337(1)006A(2)(3)015 208 10 15 3,531 105 3 6.3 330 V/7343-20 T543V337(1)006A(2)(3)018 208 10 18 3,223 105 3 6.3 330 V/7343-20 T543V337(1)006A(2)(3)025 208 10 25 2,735 105 3 6.3 330 V/7343-20 T543V337(1)006A(2)(3)040 208 10 40 2,162 105 3 6.3 330 V/7343-20 T543V337(1)006A(2)(3)045 208 10 45 2,039 105 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)006 208 10 6 6,124 125 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)009 208 10 9 5,000 125 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)010 208 10 10 4,743 125 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)015 208 10 15 3,873 125 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)018 208 10 18 3,536 125 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)025 208 10 25 3,000 125 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)040 208 10 40 2,372 125 3 6.3 330 D-7343-31 T543D337(1)006A(2)(3)045 208 10 45 2,236 12 5 3 6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)005 208 10 5 6,943 125 3 6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)006 208 10 6 6,338 125 3 6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)010 208 10 10 4,909 125 3 6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)015 208 10 15 4,008 125 3 6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)025 208 10 25 3,105 125 3 6.3 330 Y/7343-40 T543Y337(1)006A(2)(3)040 208 10 40 2,455 125 3 6.3 470 W/7343-15 T543W477(1)006A(2)(3)055 296 10 55 1,809 85 3 6.3 470 W/7343-15 T543W477(1)006A(2)(3)035 296 10 35 2,268 85 3 6.3 470 V/7343-20 T543V477(1)006A(2)(3)055 296 10 55 1,844 85 3 6.3 470 D-7343-31 T543D477(1)006A(2)(3)015 296 10 15 3,873 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.

13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 6.3 470 D-7343-31 T543D477(1)006A(2)(3)025 296 10 25 3,000 105 3 6.3 470 D-7343-31 T543D477(1)006A(2)(3)030 296 10 30 2,739 105 3 6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)005 296 10 5 6,943 105 3 6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)010 296 10 10 4,909 105 3 6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)015 296 10 15 4,008 105 3 6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)018 296 10 18 3,659 105 3 6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)025 296 10 25 3,105 105 3 6.3 470 Y/7343-40 T543Y477(1)006A(2)(3)035 296 10 35 2,624 105 3 6.3 470 X/7343-43 T543X477(1)006A(2)(3)005 296 10 5 7,029 125 3 6.3 470 X/7343-43 T543X477(1)006A(2)(3)006 296 10 6 6,416 125 3 6.3 470 X/7343-43 T543X477(1)006A(2)(3)010 296 10 10 4,970 125 3 6.3 470 X/7343-43 T543X477(1)006A(2)(3)018 296 10 18 3,704 125 3 6.3 470 X/7343-43 T543X477(1)006A(2)(3)035 296 10 35 2,657 125 3 6.3 470 X/7343-43 T543X477(1)006A(2)(3)040 296 10 40 2,485 125 3 6.3 680 X/7343-43 T543X687(1)006A(2)(3)010 428 10 10 4,970 125 3 6.3 680 X/7343-43 T543X687(1)006A(2)(3)018 428 10 18 3,704 125 3 6.3 1,000 H/7360-20 T543H108(1)006A(2)(3)055 630 20 55 1,844 85 4 6.3 1,000 O/7360-43 T543O108M006A(2)(3)010 630 10 10 5,480 105 3 6.3 1,000 O/7360-43 T543O108M006A(2)(3)015 630 10 15 4,470 105 3 6.3 1,500 H/7360-20 T543H158(1)006A(2)(3)055 945 20 55 1,844 85 4 8 33 T/3528-12 T543T336(1)008A(2)(3)070 26 8 70 1,225 105 3 8 33 T/3528-12 T543T336(1)008A(2)(3)080 26 8 80 1,146 105 3 8 33 B/3528-21 T543B336(1)008A(2)(3)025 26 8 25 2,254 105 3 8 33 B/3528-21 T543B336(1)008A(2)(3)035 26 8 35 1,905 105 3 8 33 B/3528-21 T543B336(1)008A(2)(3)040 26 8 40 1,782 105 3 8 33 B/3528-21 T543B336(1)008A(2)(3)070 26 8 70 1,347 105 3 8 33 U/6032-15 T543U336(1)008A(2)(3)070 26 8 70 1,389 105 3 8 47 B/3528-21 T543B476(1)008A(2)(3)035 38 8 35 1,905 105 3 8 47 B/3528-21 T543B476(1)008A(2)(3)070 38 8 70 1,347 105 3 8 150 V/7343-20 T543V157(1)008A(2)(3)040 120 10 40 2,162 105 3 8 150 D-7343-31 T543D157(1)008A(2)(3)025 120 10 25 3,000 105 3 8 150 D-7343-31 T543D157(1)008A(2)(3)040 120 10 40 2,372 105 3 8 150 D-7343-31 T543D157(1)008A(2)(3)055 120 10 55 2,023 105 3 10 10 A/3216-18 T543A106(1)010A(2)(3)080 10 8 80 1,183 105 3 10 15 A/3216-18 T543A156(1)010A(2)(3)080 15 8 80 1,183 105 3 10 22 A/3216-18 T543A226(1)010A(2)(3)080 22 8 80 1,183 105 3 10 22 B/3528-21 T543B226(1)010A(2)(3)080 22 8 80 1,260 105 3 10 33 T/3528-12 T543T336(1)010A(2)(3)070 33 8 70 1,225 105 3 10 33 T/3528-12 T543T336(1)010A(2)(3)080 33 8 80 1,146 105 3 10 33 B/3528-21 T543B336(1)010A(2)(3)025 33 8 25 2,254 10 5 3 10 33 B/3528-21 T543B336(1)010A(2)(3)035 33 8 35 1,905 105 3 10 33 B/3528-21 T543B336(1)010A(2)(3)040 33 8 40 1,782 105 3 10 33 B/3528-21 T543B336(1)010A(2)(3)070 33 8 70 1,347 105 3 10 33 B/3528-21 T543B336(1)010A(2)(3)080 33 8 80 1,260 105 3 10 33 U/6032-15 T543U336(1)010A(2)(3)070 33 8 70 1,389 105 3 10 47 B/3528-21 T543B476(1)010A(2)(3)035 47 8 35 1,905 105 3 10 47 B/3528-21 T543B476(1)010A(2)(3)070 47 8 70 1,347 105 3 10 47 U/6032-15 T543U476(1)010A(2)(3)055 47 8 55 1,567 105 3 10 47 C/6032-28 T543C476(1)010A(2)(3)100 47 8 100 1,285 105 3 10 68 U/6032-15 T543U686(1)010A(2)(3)055 68 8 55 1,567 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL

14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 10 68 C/6032-28 T543C686(1)010A(2)(3)045 68 8 45 1,915 105 3 10 68 W/7343-15 T543W686(1)010A(2)(3)025 68 10 25 2,683 105 3 10 68 W/7343-15 T543W686(1)010A(2)(3)040 68 10 40 2,121 105 3 10 68 V/7343-20 T543V686(1)010A(2)(3)025 68 10 25 2,735 105 3 10 68 V/7343-20 T543V686(1)010A(2)(3)040 68 10 40 2,162 105 3 10 68 V/7343-20 T543V686(1)010A(2)(3)045 68 10 45 2,039 105 3 10 68 V/7343-20 T543V686(1)010A(2)(3)060 68 10 60 1,765 105 3 10 68 V/7343-20 T543V686(1)010A(2)(3)100 68 10 100 1,367 105 3 10 68 D-7343-31 T543D686(1)010A(2)(3)100 68 10 100 1,500 105 3 10 100 B/3528-21 T543B107(1)010A(2)(3)150 100 10 150 920 105 3 10 100 L/6032-19 T543L107(1)010A(2)(3)025 100 8 25 2,449 105 3 10 100 C/6032-28 T543C107(1)010A(2)(3)025 100 8 25 2,569 105 3 10 100 C/6032-28 T543C107(1)010A(2)(3)045 100 8 45 1,915 105 3 10 100 W/7343-15 T543W107(1)010A(2)(3)040 100 10 40 2,121 105 3 10 100 V/7343-20 T543V107(1)010A(2)(3)018 100 10 18 3,223 105 3 10 100 V/7343-20 T543V107(1)010A(2)(3)025 100 10 25 2,735 105 3 10 100 V/7343-20 T543V107(1)010A(2)(3)045 100 10 45 2,039 105 3 10 100 V/7343-20 T543V107(1)010A(2)(3)050 100 10 50 1,934 105 3 10 100 D-7343-31 T543D107(1)010A(2)(3)018 100 10 18 3,536 125 3 10 100 D-7343-31 T543D107(1)010A(2)(3)025 100 10 25 3,000 125 3 10 100 D-7343-31 T543D107(1)010A(2)(3)055 100 10 55 2,023 125 3 10 100 D-7343-31 T543D107(1)010A(2)(3)080 100 10 80 1,677 125 3 10 150 C/6032-28 T543C157(1)010A(2)(3)055 150 8 55 1,732 105 3 10 150 V/7343-20 T543V157(1)010A(2)(3)025 150 10 25 2,735 105 3 10 150 V/7343-20 T543V157(1)010A(2)(3)040 150 10 40 2,162 105 3 10 150 D-7343-31 T543D157(1)010A(2)(3)005 150 10 5 6,708 125 3 10 150 D-7343-31 T543D157(1)010A(2)(3)006 150 10 6 6,124 125 3 10 150 D-7343-31 T543D157(1)010A(2)(3)010 150 10 10 4,743 125 3 10 150 D-7343-31 T543D157(1)010A(2)(3)015 150 10 15 3,873 125 3 10 150 D-7343-31 T543D157(1)010A(2)(3)018 150 10 18 3,536 125 3 10 150 D-7343-31 T543D157(1)010A(2)(3)025 150 10 25 3,000 125 3 10 150 D-7343-31 T543D157(1)010A(2)(3)040 150 10 40 2,372 125 3 10 150 D-7343-31 T543D157(1)010A(2)(3)055 150 10 55 2,023 125 3 10 150 Y/7343-40 T543Y157(1)010A(2)(3)018 150 10 18 3,659 105 3 10 150 Y/7343-40 T543Y157(1)010A(2)(3)025 150 10 25 3,105 105 3 10 220 V/7343-20 T543V227(1)010A(2)(3)025 220 10 25 2,735 105 3 10 220 V/7343-20 T543V227(1)010A(2)(3)045 220 10 45 2,039 105 3 10 220 D-7343-31 T543D227(1)010A(2)(3)006 220 10 6 6,124 125 3 10 220 D-7343-31 T543D227(1)010A(2)(3)010 220 10 10 4,743 125 3 10 220 D-7343-31 T543D227(1)010A(2)(3)018 220 10 18 3,536 12 5 3 10 220 D-7343-31 T543D227(1)010A(2)(3)025 220 10 25 3,000 125 3 10 220 D-7343-31 T543D227(1)010A(2)(3)040 220 10 40 2,372 125 3 10 220 Y/7343-40 T543Y227(1)010A(2)(3)006 220 10 6 6,338 125 3 10 220 Y/7343-40 T543Y227(1)010A(2)(3)010 220 10 10 4,909 125 3 10 220 Y/7343-40 T543Y227(1)010A(2)(3)040 220 10 40 2,455 125 3 10 330 Y/7343-40 T543Y337(1)010A(2)(3)015 330 10 15 4,008 105 3 10 330 Y/7343-40 T543Y337(1)010A(2)(3)035 330 10 35 2,624 105 3 10 330 X/7343-43 T543X337(1)010A(2)(3)005 330 10 5 7,029 125 3 10 330 X/7343-43 T543X337(1)010A(2)(3)006 330 10 6 6,416 125 3 10 330 X/7343-43 T543X337(1)010A(2)(3)010 330 10 10 4,970 125 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.

15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 10 330 X/7343-43 T543X337(1)010A(2)(3)025 330 10 25 3,143 125 3 10 330 X/7343-43 T543X337(1)010A(2)(3)040 330 10 40 2,485 125 3 10 470 X/7343-43 T543X477(1)010A(2)(3)020 470 10 20 3,674 105 3 10 680 O/7360-43 T543O687M010A(2)(3)015 680 10 15 4,470 105 3 12.5 10 T/3528-12 T543T106(1)12RA(2)(3)150 13 8 150 837 105 3 12.5 15 T/3528-12 T543T156(1)12RA(2)(3)080 19 8 80 1,146 105 3 12.5 330 X/7343-43 T543X337(1)12RA(2)(3)015 413 10 15 4,058 105 3 16 10 B/3528-21 T543B106(1)016A(2)(3)100 16 8 100 1,127 105 3 16 22 C/6032-28 T543C226(1)016A(2)(3)080 35 8 80 1,436 105 3 16 33 W/7343-15 T543W336(1)016A(2)(3)045 53 10 45 2,000 105 3 16 33 V/7343-20 T543V336(1)016A(2)(3)045 53 10 45 2,039 105 3 16 33 V/7343-20 T543V336(1)016A(2)(3)060 53 10 60 1,765 105 3 16 33 V/7343-20 T543V336(1)016A(2)(3)070 53 10 70 1,634 105 3 16 47 W/7343-15 T543W476(1)016A(2)(3)045 75 10 45 2,000 105 3 16 47 V/7343-20 T543V476(1)016A(2)(3)045 75 10 45 2,039 105 3 16 47 V/7343-20 T543V476(1)016A(2)(3)070 75 10 70 1,634 105 3 16 47 V/7343-20 T543V476(1)016A(2)(3)080 75 10 80 1,529 105 3 16 47 D-7343-31 T543D476(1)016A(2)(3)035 75 10 35 2,535 125 3 16 47 D-7343-31 T543D476(1)016A(2)(3)065 75 10 65 1,861 125 3 16 47 D-7343-31 T543D476(1)016A(2)(3)070 75 10 70 1,793 125 3 16 68 V/7343-20 T543V686(1)016A(2)(3)050 109 10 50 1,934 105 3 16 68 V/7343-20 T543V686(1)016A(2)(3)090 109 10 90 1,441 105 3 16 100 V/7343-20 T543V107(1)016A(2)(3)050 160 10 50 1,934 105 3 16 100 D-7343-31 T543D107(1)016A(2)(3)035 160 10 35 2,535 125 3 16 100 D-7343-31 T543D107(1)016A(2)(3)050 160 10 50 2,121 125 3 16 150 X/7343-43 T543X157(1)016A(2)(3)015 240 10 15 4,058 125 3 16 150 X/7343-43 T543X157(1)016A(2)(3)025 240 10 25 3,143 125 3 16 150 X/7343-43 T543X157(1)016A(2)(3)040 240 10 40 2,485 125 3 16 150 X/7343-43 T543X157(1)016A(2)(3)080 240 10 80 1,757 125 3 16 220 X/7343-43 T543X227(1)016A(2)(3)035 352 10 35 2,657 125 3 16 220 X/7343-43 T543X227(1)016A(2)(3)080 352 10 80 1,757 125 3 16 330 X/7343-43 T543X337(1)016A(2)(3)025 528 10 25 3,143 125 3 16 330 X/7343-43 T543X337(1)016A(2)(3)050 528 10 50 2,223 125 3 16 470 O/7360-43 T543O477M016A(2)(3)020 752 10 20 3,870 105 3 16 470 O/7360-43 T543O477M016A(2)(3)040 752 10 40 2,740 105 3 20 22 V/7343-20 T543V226(1)020A(2)(3)040 44 10 40 2,162 105 3 20 22 V/7343-20 T543V226(1)020A(2)(3)045 44 10 45 2,039 105 3 20 22 V/7343-20 T543V226(1)020A(2)(3)090 44 10 90 1,441 105 3 20 22 D-7343-31 T543D226(1)020A(2)(3)040 44 10 40 2,372 105 3 20 22 D-7343-31 T543D226(1)020A(2)(3)045 44 10 45 2,236 10 5 3 20 22 D-7343-31 T543D226(1)020A(2)(3)090 44 10 90 1,581 105 3 20 33 D-7343-31 T543D336(1)020A(2)(3)060 66 10 60 1,936 125 3 20 47 V/7343-20 T543V476(1)020A(2)(3)055 94 10 55 1,844 105 3 20 47 V/7343-20 T543V476(1)020A(2)(3)090 94 10 90 1,441 105 3 20 47 D-7343-31 T543D476(1)020A(2)(3)055 94 10 55 2,023 105 3 20 100 X/7343-43 T543X107(1)020A(2)(3)035 200 10 35 2,657 125 3 20 100 X/7343-43 T543X107(1)020A(2)(3)050 200 10 50 2,223 125 3 25 10 B/3528-21 T543B106(1)025A(2)(3)100 25 10 100 1,127 105 3 25 15 V/7343-20 T543V156(1)025A(2)(3)090 38 10 90 1,441 105 3 25 15 D-7343-31 T543D156(1)025A(2)(3)060 38 10 60 1,936 125 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.

16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 25 15 D-7343-31 T543D156(1)025A(2)(3)080 38 10 80 1,677 125 3 25 22 C/6032-28 T543C226(1)025A(2)(3)080 55 8 80 1,436 105 3 25 22 D-7343-31 T543D226(1)025A(2)(3)075 55 10 75 1,732 125 3 25 22 V/7343-20 T543V226(1)025A(2)(3)060 55 10 60 1,765 105 3 25 22 V/7343-20 T543V226(1)025A(2)(3)090 55 10 90 1,441 105 3 25 33 V/7343-20 T543V336(1)025A(2)(3)060 83 10 60 1,765 105 3 25 33 D-7343-31 T543D336(1)025A(2)(3)060 83 10 60 1,936 105 3 25 68 X/7343-43 T543X686(1)025A(2)(3)035 170 10 35 2,657 125 3 25 68 X/7343-43 T543X686(1)025A(2)(3)050 170 10 50 2,223 125 3 25 100 X/7343-43 T543X107(1)025A(2)(3)060 250 10 60 2,029 125 3 25 150 O/7360-43 T543O157M025A(2)(3)045 375 10 45 2,580 105 3 30 22 D-7343-31 T543D226(1)030A(2)(3)075 66 10 75 1,732 105 3 30 33 D-7343-31 T543D336(1)030A(2)(3)100 99 10 100 1,500 105 3 30 47 X/7343-43 T543X476(1)030A(2)(3)050 141 10 50 2,223 105 3 30 68 X/7343-43 T543X686(1)030A(2)(3)035 204 10 35 2,657 125 3 30 68 X/7343-43 T543X686(1)030A(2)(3)050 204 10 50 2,223 125 3 30 100 X/7343-43 T543X107(1)030A(2)(3)035 300 10 35 2,657 105 3 30 100 X/7343-43 T543X107(1)030A(2)(3)060 300 10 60 2,029 105 3 30 100 X/7343-43 T543X107(1)030A(2)(3)070 300 10 70 1,878 105 3 30 150 O/7360-43 T543O157M030A(2)(3)030 450 10 30 3,160 105 3 30 150 O/7360-43 T543O157M030A(2)(3)045 450 10 45 2,580 105 3 30 150 O/7360-43 T543O157M030A(2)(3)055 450 10 55 2,340 105 3 35 15 V/7343-20 T543V156(1)035A(2)(3)100 53 10 100 1,367 105 3 35 15 V/7343-20 T543V156(1)035A(2)(3)125 53 10 125 1,223 105 3 35 15 D-7343-31 T543D156(1)035A(2)(3)100 53 10 100 1,500 125 3 35 15 D-7343-31 T543D156(1)035A(2)(3)125 53 10 125 1,342 125 3 35 33 X/7343-43 T543X336(1)035A(2)(3)065 116 10 65 1,949 105 3 35 47 X/7343-43 T543X476(1)035A(2)(3)030 165 10 30 2,869 125 3 35 47 X/7343-43 T543X476(1)035A(2)(3)060 165 10 60 2,029 125 3 35 68 O/7360-43 T543O686M035A(2)(3)025 238 10 25 3,460 105 3 35 68 O/7360-43 T543O686M035A(2)(3)045 238 10 45 2,580 105 3 40 68 O/7360-43 T543O686M040A(2)(3)035 272 10 35 2,930 105 3 50 5.6 D-7343-31 T543D565(1)050A(2)(3)070 28 10 70 1,793 105 3 50 5.6 D-7343-31 T543D565(1)050A(2)(3)090 28 10 90 1,581 105 3 50 6.8 V/7343-20 T543V685(1)050A(2)(3)065 34 10 65 1,934 125 3 50 10 D-7343-31 T543D106(1)050A(2)(3)090 50 10 90 1,581 125 3 50 10 D-7343-31 T543D106(1)050A(2)(3)100 50 10 100 1,500 125 3 50 10 D-7343-31 T543D106(1)050A(2)(3)120 50 10 120 1,369 125 3 50 15 X/7343-43 T543X156(1)050A(2)(3)035 75 10 35 2,657 105 3 50 15 X/7343-43 T543X156(1)050A(2)(3)070 75 10 70 1,878 10 5 3 50 18 X/7343-43 T543X186(1)050A(2)(3)035 90 10 35 2,657 125 3 50 18 X/7343-43 T543X186(1)050A(2)(3)070 90 10 70 1,878 125 3 50 22 X/7343-43 T543X226(1)050A(2)(3)040 110 10 40 2,485 125 3 50 22 X/7343-43 T543X226(1)050A(2)(3)075 110 10 75 1,815 125 3 50 33 X/7343-43 T543X336(1)050A(2)(3)040 165 10 40 2,485 125 3 50 33 X/7343-43 T543X336(1)050A(2)(3)075 165 10 75 1,815 125 3 50 47 O/7360-43 T543O476M050A(2)(3)060 235 10 60 2,240 105 3 63 4.7 D-7343-31 T543D475(1)063A(2)(3)075 30 10 75 1,732 125 3 63 4.7 D-7343-31 T543D475(1)063A(2)(3)100 30 10 100 1,500 125 3 63 4.7 D-7343-31 T543D475(1)063A(2)(3)120 30 10 120 1,369 125 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request.

17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ±20%, K for ±10%. Designates capacitance tolerance. (2) To complete KEMET part number, H = Solder-plated, T = 100% Tin (Sn). Designates termination finish. (3) To complete KEMET part number, insert E = None, S = 10 cycles +25°C, W = 10 cycles −55°C +85°C. Designates surge current option. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. Rated Voltage VDC at 105°C Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL Not all parts are 105°C rated µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C 63 6.8 D-7343-31 T543D685(1)063A(2)(3)075 43 10 75 1,700 125 3 63 10 X/7343-43 T543X106(1)063A(2)(3)050 63 10 50 2,223 125 3 63 10 X/7343-43 T543X106(1)063A(2)(3)075 63 10 75 1,815 125 3 63 10 X/7343-43 T543X106(1)063A(2)(3)100 63 10 100 1,572 125 3 63 10 X/7343-43 T543X106(1)063A(2)(3)150 63 10 150 1,283 125 3 63 15 X/7343-43 T543X156(1)063A(2)(3)035 95 10 35 2,657 125 3 63 15 X/7343-43 T543X156(1)063A(2)(3)050 95 10 50 2,223 125 3 63 22 X/7343-43 T543X226(1)063A(2)(3)075 138.6 10 75 1,815 125 3 63 22 O/7360-43 T543O226M063A(2)(3)030 139 10 30 3,160 105 3 63 22 O/7360-43 T543O226M063A(2)(3)040 139 10 40 2,740 105 3 VDC at 105°C µF KEMET/EIA (See below for part options) µA at VR, 25°C Maximum/ % at 25°C 120 Hz Maximum mΩ at 25°C 100 kHz Maximum (rms) mA at 45°C 100 kHz °C Reflow Temp ≤ 260°C Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. MSL

18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Derating Guidelines 50% 55% 60% 65% 70% 75% 80% 85% 90% 95% 100% −55 25 45 85 105 125 % Rated Voltage Temperature (°C) Rated Voltage Recommended Application Voltage V R ≤ 10 V Recommended Application Voltage V R > 10 V Recommended Application Voltage KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according the graphic above, for the maximum steady state voltage. Voltage Rating Maximum Recommended Steady State Voltage −55°C to 105°C

5 V ≤ VR ≤ 10 V 90 % of VR

12.5 V ≤ VR ≤ 63 V 80 % of VR

VR= Rated Voltage

19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. T he positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. T he negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified f or r everse v oltage. S ee th e R everse V oltage sec tion for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 45°C 45° C < T ≤ 85°C 85°C < T ≤ 125°C 1.00 0.70 0.25 T = Environmental temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. Case Code EIA Case Code Maximum Power Dissipation (Pmax) mWatts at 45°C with +30°C Rise A 3216-18 112 B 3528-21 127 C 6032-28 165 D 7343-31 225 H 7360-20 187 L 6032-19 150 M 3528-15 120 O 7360-43 300 T 3528-12 105 U 6032-15 135 V 7343-20 187 W 7343-15 180 X 7343-43 247 Y 7343-40 241 Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √Pmax/R E(max) = Z √Pmax/R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms)

20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Surge Voltage Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be applied for periodic charging and discharging in the course of normal operation and cannot be part of the application voltage. Surge voltage capability is demonstrated by application of 1,000cycles at relevant voltage at 105°C and 125°C. The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle. Rated Voltage (V) Surge Voltage (V) Category Voltage (V) Category Surge Voltage (V) –55°C to 105°C up to 125°C 2.5 3.3 1.7 2.2 6.3 8.2 4.2 5.5 10 13 6.7 8.7 16 20.8 10.7 13.9 20 26 13.4 17.4 25 32.5 16.8 21.8 35 45.5 23.5 30.5 40 52 26.8 34.6 50 65 33.5 43.6 Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 15% of rated voltage 55°C 10% of rated voltage 85°C 5% of rated voltage 105°C 3% of rated voltage 125°C* 1% of rated voltage *For series rated to 125°C

21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. L S W W L Grid Placement Courtyard

22© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Soldering Process The KEMET families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or v apor p hase r eflow t echniques. P reheating o f th ese co mponents is recommended to avoid extreme thermal stress. K EMET's r ecommended p rofile c onditions f or co nvection a nd I R r eflow r eflect th e p rofile c onditions o f th e IP C/J–STD–020D standard for moisture sensitivity testing. The d evices c an s afely w ithstand a m aximum o f th ree r eflow pa sses at these conditions. Please note that although the X/7343–43 case size can withstand w ave s oldering, th e t all p rofile ( 4.3 m m m aximum) di ctates care in wave process development. Hand soldering should be performed with care due to the difficulty i n p rocess c ontrol. I f p erformed, c are s hould b e ta ken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow o ccurs. O nce r eflow o ccurs, th e i ron s hould b e re moved i mmediately. “ Wiping” th e e dges o f a c hip a nd he ating the top surface is not recommended. During t ypical r eflow o perations, a s light d arkening o f th e go ld-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (T Smin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (T L to TP) 3°C/second maximum 3°C/second maximum Liquidous Temperature (T L) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 60 – 150 seconds Peak Temperature (T P) 220°C* 235°C** 250°C* 260°C** Time within 5°C of Maximum Peak Temperature (t P) 20 seconds maximum 30 seconds maximum Ramp-down Rate (T P to TL) 6°C/second maximum 6°C/second maximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height ≤ 2.5 mm Time Temperature Tsmin Tsmax TL TP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tP tL ts 25°C to Peak Storage All KO-Cap are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts ar e c lassified a s m oisture s ensitivity l evel 3 ( MSL3) o r m oisture s ensitivity l evel 4 ( MSL4) p er I PC/JEDEC J -STD-020 an d p ackaged p er IPC/JEDEC J -STD-033. R efer t o T able 1 f or p art t ype s pecification. M SL3 s pecifies a fl oor t ime o f 8H a t 3 0°C m aximum t emperature and 6 0% r elative h umidity. M SL4 s pecifies a fl oor t ime o f 7 2H a t 3 0°C m aximum te mperature and 6 0% r elative h umidity. U nused c apacitors s hould b e s ealed i n a M BB w ith fr esh d esiccant. Calculated shelf life in sealed bag: – 12 months from bag seal date in a storage environment of < 40°C and humidity < 90% RH – 24 months from bag seal date in a storage environment of < 30°C and humidity < 70% RH If baking is required, refer to IPC/JEDEC J–STD–033 for bake procedure

23© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Construction Leadframe (− Cathode) Leadframe (+ Anode) Wire Molded Epoxy Case Molded Epoxy Case Polarity Bevel (+) Weld (to attach wire) Silver Adhesive Polarity Stripe (+) Detailed Cross Section Wire Tantalum Ta2O5 Dielectric (First Layer) Carbon (Third Layer) Silver Paint (Fourth Layer) Polymer (Second Layer) Capacitor Marking KEMET Multi-Anode Polymer Polarity Indicator (+) Rated Voltage Picofarad Code KEMET ID Date Code* * 908 = 8th week of 2019 Date Code * 1st digit = last number of year 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 = 2019 2nd and 3rd digit = week of the year 01 = 1st week of the year to 52 = 52nd week of the year

24© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 an d 1 2 m m p lastic t ape o n 7 " a nd 1 3" r eels i n a ccordance w ith EI A Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Embossment 8 mm (0.315”) or 12 mm (0.472”) Embossed carrier Right hand orientation only (+) (−) Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) Table 3 – Packaging Quantity Case Code Tape Width (mm) 7" Reel* 13" Reel* KEMET EIA P 2012-10 8 3,000 N/A R 2012-12 8 2,500 10,000 I 3216-10 8 3,000 N/A S 3216-12 8 2,500 10,000 A 3216-18 8 2,000 N/A T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 B 3528-21 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 C 6032-28 12 500 3,000 Q 7343-12 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-19 12 1,000 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 J 7360-15 12 1,000 3,000 H 7360-20 12 1,000 3,000 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

25© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T F W Center Lines of Cavity User Direction of Unreeling Cover Tape B1 is for tape feeder reference only, including draft concentric about B0. ØD1 ØD0 Embossment For cavity size, see Note 1, Table 4 (10 pitches cumulative tolerance on tape ±0.2 mm) Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 D1 Minimum Note 1 E1 P0 P2 R Reference Note 2 S1 Minimum Note 3 T Maximum T1 Maximum 8 mm 1.5 +0.10/−0.0 1.0 (0.039) 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) (1.181) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 ±0.05 (0.138 ±0.002) 2.5 (0.098) 8.3 (0.327) Note 5 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 ±0.05 (0.217 ±0.002) 4.6 (0.181) 12.3 (0.484) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defi ned by A0, B0 and K0 shall surround the component with suﬃ cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

27© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC Figure 5 – Reel Dimensions A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm minimum) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 20.2 (0.795)12 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 8 mm 50 (1.969) 8.4 +1.5/−0.0 14.4 (0.567) Shall accommodate tape width without interference12 mm 12.4 +2.0/−0.0 18.4 (0.724)

29© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard T2 061_T543 • 8/12/2020 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com KEMET Organic Capacitor (KO-CAP ®) – High Reliability T543 Up-Screen Commercial Polymer Electrolytic, 2.5 – 63 VDC KEMET Electronics Corporation Sales Oﬃ ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.

Product Information

T543 specifications and overview.

Summary

T543 Up-Screen Commercial Polymer Electrolytic, 2.5 ??63 VDC

Description

T543 Up-Screen Commercial Polymer Electrolytic, 2.5 ??63 VDC

Source title T543 Datasheet(PDF) - Kemet Corporation

Related Parts

More parts from the same family.

Browse manufacturer