T529P226M006AAE200 KEMET | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 15
Technical content
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 One world. One KEMET Benefits
- Polymer cathode technology
- Substrate Termination
- EIA Case Size: 2012 (0805 MLCC Equivalent)
- Low Profile: 1.0 mm maximum
- Non-ignition failure mode
- Improved volumetric efficiency
- Self-healing mechanism
- Capacitance: 22 uF to 150 uF
- Use up to 90% of rated voltage (10% derating)
- Voltage: 6.3 V and 10 V
- RoHS Compliant and Halogen Free
- 105°C maximum temperature capability
- Lead free 260°C reflow capable
Applications
Typical applications include densely populated circuits where space restrictions do not allow for larger and more commonly available case sizes such as smart phones, digital cameras, MP3 players, GPS navigation systems, WiFi modules, analytical and test equipment, and audio/sound circuits. Overview The KEMET Low ESR Polymer Series is a tantalum capacitor with a Ta anode and Ta 2O5 dielectric. A conductive organic polymer replaces the traditionally used MnO2 as the cathode plate of the capacitor. This results in very low ESR and improved capacitance retention at high frequency. The KO- CAP also exhibits a benign failure mode which eliminates the ignition failures that can occur in standard MnO 2 tantalum types. KO-CAPs may also be operated at voltages up to 90% of rated voltage for part types with rated voltages of ≤ 10 volts and up to 80% of rated voltage for part types > 10 volts with equivalent or better reliability than traditional MnO 2 tantalum capacitors operated at 50% of rated voltage. The T529 Series KO-CAP uses a substrate termination design, which results in the most volumetrically efficient packaging technology available today in Polymer Tantalum Chip Capacitors. This series offers high capacitance values in a small 2012-10 (2.0 mm (L) x 1.2 mm (W) x 1.0 mm (H)) package size. The T529 Series is ideal for use in densely populated circuits such as smart phones and digital cameras where space restrictions do not allow for larger and more commonly available case sizes. KEMET Organic Capacitor (KO-CAP) T529 Series Small Case Size Substrate Terminal Polymer Tantalum Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC. Halogen free.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum
Ordering Information
T 529 P 476 M 006 A A E200 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Code T = Tantalum 529 = Substrate Terminal Polymer P = 2012-10 I = 3216-10 First two digits represent significant figures. Third digit specifies number of zeros. e.g., 476 = 47 µF M = ±20% 006 = 6.3 V 010 = 10 V A = N/A A = Ni - Au E = ESR Last three digits specify ESR in mΩ (200 = 200 mΩ) Performance Characteristics Item Specifications Operating Temperature -55°C to 105°C Rated Capacitance Range 22 µF to 150 µF @ 120 Hz/25°C Capacitance Tolerance M Tolerance (20%) Rated Voltage Range 6.3 V and 10 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current Refer to Part Number Electrical Specification Table
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Qualification Test Condition/Characteristics Endurance 85°C @ rated voltage, 1,000 hours Δ C/C Within initial Δ C/C limits DF Within 1.5 x initial limits DCL Within 3.0 x initial limits Damp Heat Steady State 40°C, 90 to 95% RH, 500 hours Δ C/C -20% to +30% of initial Δ C/C limit DF Within 1.5 x initial limits DCL Within 3.0 x initial limits Temperature Stability Extreme temperature exposure at -55°C and +105°C +25°C -55°C +105°C Δ C/C I L* -20% to 0% of Δ C/C -50% - 0% of Δ C/C DF IL IL IL DCL IL IL 1.25 CV Surge Voltage 1.3 Vr, 85°C, 1,000 Ω resistor, 1,000 cycles Δ C/C Within initial Δ C/C limits DF Within initial limit DCL Within initial limit Mechanical Shock 100 G, Saw-Tooth wave Δ C/C Within initial Δ C/C limits DF Within initial limit DCL Within initial limit Vibration Frequency: 10 to 2 kHz, Sweep: 1 minute, Amplitude of vibration: 1.5 mm, Vibration Time: Each plane shall be 2 hours for a total of 4 hours. Δ C/C Within initial Δ C/C limits DF Within initial limit DCL Within initial limit Terminal strength Strength: 4.9 N, Time: 10 ±0.5 seconds (two directions) Visual No evidence of mechanical damage *IL = Initial limit Dimensions – Millimeters Case Size Component KEMET EIA L W H F S
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Table 1 – Ratings & Part Number Reference Rated Voltage Rated Capacitance Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp. VDC µF KEMET/EIA (See below for part options) µA @ +25ºC Maximum/
5 Minutes
% @ +25ºC 120 Hz Maximum mΩ @ +25ºC 100 kHz Maximum (mA) +45 ºC 100 kHz Temp ≤ 260ºC °C 6.3 22 P/2012-10 T529P226M006AAE200 22.0 6 200 548 3 105 6.3 47 P/2012-10 T529P476M006AAE200 29.6 6 200 510 3 105 6.3 47 P/2012-10 T529P476M006AAE150 29.6 6 150 590 3 105 6.3 150 I/3216-10 T529I157M006AAE200 283.5 10 200 548 3 105 6.3 150 I/3216-10 T529I157M006AAE100 283.5 10 100 775 3 105 6.3 150 I/3216-10 T529I157M006AAE070 283.5 10 70 926 3 105 10 22 P/2012-10 T529P226M010AAE200 33.0 6 200 354 3 105 10 47 P/2012-10 T529P476M010AAE200 141.0 6 200 510 3 105 Refer to Ordering Information for additional detail. Under development Derating Guidelines Voltage Rating -55°C to 85°C 85°C to 105°C Maximum Recommended Steady State Voltage Maximum Recommended Transient Voltage (1 ms – 1 µs) Maximum Recommended Steady State Voltage Maximum Recommended Transient Voltage (1 ms – 1 µs) ≤ 10 V 90% of VR VR See Chart See Chart VR = Rated Voltage 50% 60% 70% 80% 90% 100% 110% -55 25 85 105 Maximum Transient Voltage Recommended Application Voltage 72% 80%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 45°C 45°C < T ≤ 85°C 85°C < T ≤ 105°C 1.00 0.90 0.40 T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation(watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts @ 45°C with +30°C Rise I 3216 60 P 2012 25 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Reverse Voltage Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 55°C 10% of Rated Voltage 85°C 5% of Rated Voltage 105°C 3% of Rated Voltage 125°C* 1% of Rated Voltage *For Series Rated to 125°C Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Dimensions in mm Case EIA G Maximum Z Minimum X Minimum Y ref I 3216–10 1.65 3.25 1.10 0.80 P 2012–10 1.05 2.05 0.80 0.50
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Time Temperature Tsmin 25ºC to Peak tL tS tP Tsmax TL TP Maximum Ramp Up Rate = 3ºC/seconds Maximum Ramp Down Rate = 6ºC/seconds Soldering Process KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the gold- colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (T Smin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (T L to TP) 3°C/seconds maximum 3°C/seconds maximum Liquidous Temperature (T L) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 60 – 150 seconds Peak Temperature (TP) 220°C* 235°C** 250°C* 260°C** Time within 5°C of Maximum Peak Temperature (tP) 20 seconds maximum 30 seconds maximum Ramp-down Rate (T P to TL) 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z Construction
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Capacitor Marking Polarity Indicator (+) Voltage and Capacitance Code Date Code* E Js Date Code * Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
2013 A B C D E F G H J K L M
2014 N P Q R S T U V W X Y Z
2015 a b c d e f g h j k l m 2016 n p q r s t u v w x y z Code J A Rated Voltage 6 V 10 V Code j s a Capacitance 22 47 100 Storage All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classified as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working environments with temperatures not to exceed 30°C and humidity not in excess of 60% RH.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Tape & Reel Packaging Information KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Table 3 – Packaging Quantity KEMET Case Codes Tape and Reel Dimensions Tape Width (mm) 180 mm (7" diameter) I 3216 8 3,000 P 2012 8 3,000 (Quantity per reel) Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 8 mm (0.315") or or 330 mm (13.0")
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Figure 1 – Embossed (Plastic) Carrier Tape Dimensions Po T F W Center Lines of Cavity Ao Bo User Direction of Unreeling Cover Tape Ko B1 is for tape feeder reference only, including draft concentric about B o. ØD1 ØDo Embossment For cavity size, see Note 1 Table 4 [10 pitches cumulative tolerance on tape ± 0.2 mm] Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 D1 Minimum Note 1 E1 P0 P2 R Reference Note 2 S1 Minimum Note 3 T Maximum T1 Maximum 8 mm 1.5 +0.10/-0.0 1.0 (0.039) 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004)12 mm 1.5 (0.059) (1.181)16 mm Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 ±0.05 (0.138 ±0.002) 4.0 ±0.10 (0.157 ±0.004) 2.5 (0.098) 8.3 (0.327) Note 512 mm Single (4 mm) & Double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 ±0.05 (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) 4.6 (0.181) 12.3 (0.484) 16 mm Triple (12 mm) 12.1 (0.476) 14.25 (0.561) 5.5 ±0.05 (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) 4.6 (0.181) 16.3 (0.642) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defi ned by A0, B0 and K0 shall surround the component with suffi cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Figure 5 – Reel Dimensions A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm minimum) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/-0.2 20.2 (0.795)12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 8 mm (1.969) 8.4 +1.5/-0.0 14.4 (0.567) Shall accommodate tape width without interference12 mm 12.4 +2.0/-0.0 18.4 (0.724) 22.4 (0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum KEMET Corporation World Headquarters
2835 KEMET Way
Simpsonville, SC 29681 Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offi ces Fort Lauderdale, FL Tel: 954-766-2800 North America Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Europe Southern Europe Paris, France Tel: 33-1-4646-1006 Sasso Marconi, Italy Tel: 39-051-939111 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Kamen, Germany Tel: 49-2307-438110 Northern Europe Bishop’s Stortford, United Kingdom Tel: 44-1279-460122 Espoo, Finland Tel: 358-9-5406-5000 Asia Northeast Asia Hong Kong Tel: 852-2305-1168 Shenzhen, China Tel: 86-755-2518-1306 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2070_T529 • 12/6/2013 KEMET Organic Capacitor (KO-CAP) – T529 Series Small Case Size Substrate Terminal Polymer Tantalum Other KEMET Resources Tools Resource Location Confi gure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products http://www.kemet.com/products Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers RoHS Statement http://www.kemet.com/rohs Quality Documents http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request http://www.kemet.com/sample Engineering Kit Request http://www.kemet.com/kits Contact Resource Location Website www.kemet.com Contact Us http://www.kemet.com/contact Investor Relations http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.