T528Z337M2R5ATE009 KEMET | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Polymer Cathode Technology 100% Accelerated Steady State Aging Low ESL <0.7nH @ 20 MHz 100% Surge Current Testing High Frequency Cap Retention Self-Healing Mechanism Non-Ignition Failure Mode Improved Volumetric Efficiency Capacitance: 33 - 470μF Use up to 90% VR Voltage (VR): 2.5V - 10V RoHS Compliant 105°C Maximum Temperature Capability Lead Free 260°C Reflow Capable

T528 Ratings & Part Number Reference Capaci- tance μF Case Size KEMET Part Number DC Leakage μA @ 25°C Max DF% @ 25°C 120 Hz Max ESR mΩΩ @ 25°C 100 kHz Max Ripple Current (Arms) 100 kHz Max w/ΔΔT= 20°C @ -55°C to 85°C w/ΔΔT= 2°C @ 105°C

2.5 Volt Rating at 105°C

3 Volt Rating at 105°C

4 Volt Rating at 105°C

6.3 Volt Rating at 105°C

10 Volt Rating at 105°C

  • ESR specification: 10 mOhms ±20% Capacitance Tolerance M = ±20% Series 528 - Face Down Organic (FDO) Lead Material T = 100% Tin Case Size I, M, Z Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Tantalum T 528 Z 337 M 2R5 A T E012 ESR Suffix 012 = 12 mOhms max Failure Rate A = Not Applicable Voltage 2R5 = 2 1/2 volts

Ordering Information

In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Component Marking - Z Case 337 2R5K 720 Polarity Indicator (+) (Solid Stripe) Picofarad Code Rated Voltage Print Week Code 1st Digit = Year 2nd & 3rd Digits = Week “720” = 20th Week of 2007 FDO (FDO) Face-Down Organic Component Packaging Case Code Tape & Reel Dimensions KEMET EIA Tape Width mm Pitch mm Reel Quantity Part Sprocket 180mm (7” dia) 330mm (13” dia) Land Pattern Dimensions for Reflow Solder KEMET ID Facedown 7343-17 will NOT fit on standard 7343 solder pads, and move- ment along Z axis could result in a short. Three-pad design must be used with center pad connection to circuit for low ESL properties. Dual pads on cathode connection required to prevent solder lifting with one cathode pad, and for mechanical hold. Will fit on Sanyo TPL pad specification - all dimen- sions equal except for 0.80mm tab extension at left cathode (-) plate as shown above. Component Marking - I & M Case 337 720 Polarity Indicator (+) (Solid Stripe) Picofarad Code Rated Voltage Print Week Code 1st Digit = Year 2nd & 3rd Digits = Week “720” = 20th Week of 2007 FD (FD) Face-Down KEMET ID T528 Z Case T528 I & M Case Case Z G X Y1 (ref) (ref) C (ref) T528I & M Pad Dimensions (mm)