T520A686M2R5A

Kemet Corporation

KEMET Organic Capacitor (KO-CAP) T520 Series Polymer Tantalum

Manufacturer: Kemet Corporation

Document: 24 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Kemet Corporation Browse T parts

Online Datasheet

Read T520A686M2R5A online.

T495X476M025AHE080 KEMET | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 24

Technical content

Extremely low ESR
-55°C to 105°C operating temperature range
Polymer cathode technology
High frequency capacitance retention
Non-ignition failure mode
Capacitance up to 1,500 µF
100% accelerated steady state aging
100% surge current tested
Taped and reeled per EIA 481–1
Volumetric efficiency
Self-healing mechanism
EIA standard case sizes

Applications

Typical applications include DC/DC converters, notebook PCs, portable electronics, telecommunications (mobile phone and base station), displays, SSD, HDD and USB. Overview The KEMET Organic Capacitor (KO-CAP) is a tantalum capacitor with a Ta anode and Ta2O5 dielectric. A conductive organic polymer replaces the traditionally used MnO2 as the cathode plate of the capacitor. This results in very low ESR and improved capacitance retention at high frequency. The KO- CAP also exhibits a benign failure mode which eliminates the ignition failures that can occur in standard MnO 2 tantalum types. KO-CAPs may also be operated at steady state voltages up to 90% of rated voltage for part types with rated voltages of ≤ 10 volts and up to 80% of rated voltage for part types > 10 volts with equivalent or better reliability than traditional MnO 2 tantalum capacitors operated at 50% of rated voltage. The T520 Series KO-CAP Low ESR Polymer captures the best features of multilayer ceramic (low ESR, high frequency capacitance retention), aluminum electrolytic (higher capacitance, benign failure mode), and proven solid tantalum technology (volumetric efficiency, surface mount capability, extremely long life). The T520 can reduce component counts, eliminate through- hole assembly by replacing cumbersome leaded aluminum capacitors, and offer a cost-effective and space-saving solution. KEMET Organic Capacitor (KO-CAP) T520 Series Polymer Tantalum Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum SPICE For a detailed analysis of specific part numbers, please visit www.kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions.

Ordering Information

T 520 V 157 M 006 A T E045 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/ Design Lead Material ESR Code Packaging (C-Spec) T = Tantalum 520 = Polymer A, B, C, D, H, L, M, Q, T, U, V, W, X, Y First two digits represent significant figures. Third digit specifies number of zeros. M = ±20% 2R5 = 2.5 V 003 = 3 V 004 = 4 V 006 = 6.3 V 008 = 8 V 010 = 10 V 011 = 11 V 12R = 12.5 V 016 = 16 V 020 = 20 V 025 = 25 V A = N/A T = 100% Matte Tin (Sn) Plated H = Tin/Lead (SnPb) Solder Coated (5% Pb minimum) E = ESR Last three digits specify ESR in mΩ. (045 = 45 mΩ) Blank = 7" Reel 7280 = 13" Reel Performance Characteristics Item Performance Characteristics Operating Temperature -55°C to 105°C Rated Capacitance Range 10 – 1,500 µF @ 120 Hz/25°C Capacitance Tolerance M Tolerance (20%) Rated Voltage Range 2.5 – 25 V DF (120 Hz) ≤ 10% ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.1 CV (μA) at rated voltage after 5 minutes

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Qualification Test Condition Characteristics Endurance 105°C @ rated voltage, 2,000 hours Δ C/C Within -20%/+10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Storage Life 105°C @ 0 volts, 2,000 hours Δ C/C Within -20%/+10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within 2.0 x initial limit Humidity 60°C, 90% RH, 500 hours, No Load Δ C/C Within -5%/+35% of initial value DF Within initial limits DCL Within 5.0 x initial limit ESR Within 2.0 x initial limit Temperature Stability Extreme temperature exposure at a succession of continuous steps at +25ºC, -55ºC, +25ºC, +85ºC, +105ºC, +25ºC DF IL IL 1.2 x IL 1.5 x IL DCL IL n/a 10 x IL 10 x IL Surge Voltage 105°C, 1.32 x rated voltage, 1,000 cycles Δ C/C Within -20%/+10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Mechanical Shock/Vibration MIL–STD–202, Method 213, Condition I, 100 G peak. MIL–STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,

20 G peak

Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit

Electrical Characteristics

100 1,000 10,000 100,000 1,000,000 10,000,000 Capacitance (µF) Frequency (Hz) T520B157M006ATE035 T520C227M006ATE025 T520V337M006ATE015 T520D337M006ATE009 Capacitance vs. FrequencyESR vs. Frequency 0.001 0.01 0.1 100 100 1,000 10,000 100,000 1,000,000 10,000,000 Impedance,ESR (Ohms) Frequency (Hz) T520B157M006ATE035_Imp T520C227M006ATE025_Imp T520V337M006ATE015_Imp T520D337M006ATE009_Imp T520B157M006ATE035_ESR T520C227M006ATE025_ESR T520V337M006ATE015_ESR T520D337M006ATE009_ESR Dimensions – Millimeters (Inches) Metric will govern Termination cutout at KEMET’s option, either end Case Size Component KEMET EIA L* W* H* F* ±0.1 ±(0.004) S* ±0.3 ±(0.012) B* ±0.15 (Ref) ±0.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A 3216–18 3.2 ±0.2 (0.126 ±0.008) 1.6 ±0.2 (0.063 ±0.008) 1.6 ±0.2 B 3528–21 3.5 ±0.2 (0.138 ±0.008) 2.8 ±0.2 (0.110 ±0.008) 1.9 ± 0.1 C 6032–28 6.0 ±0.3 (0.236 ±0.03) 3.2 ±0.3 (0.126 ±0.012) 2.5 ±0.3 D 7343–31 7.3 ±0.3 (0.287 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 2.8 ±0.3 H 7360–20 7.3 ±0.3 (0.287 ±0.012) 6.0±0.3 (0.236 ±0.012) 2.0 (0.078) L 6032–19 6.0 ±0.3 (0.236 ±0.012) 3.2 ±0.2 M 3528–15 3.5 ±0.2 (0.138 ±0.008) 2.8 ±0.2 Q 7343-12 7.3 ±0.3 (0.287 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 1.2 (0.047) T 3528–12 3.5 ±0.2 (0.138 ±0.008) 2.8 ±0.2 U 6032–15 6.0 ±0.3 (0.236 ±0.012) 3.2 ±0.2 V 7343–19 7.3 ±0.3 (0.287 ±0.012) 4.3 ±0.3 W 7343–15 7.3 ±0.3 (0.287 ±0.012) 4.3 ±0.3 X 7343–43 7.3 ±0.3 (0.287 ±0.012) 4.3 ±0.3 (0.169 ±0.012) 4.0 ±0.3 Y 7343–40 7.3 ±0.3 (0.287 ±0.012) 4.3 ±0.3 Notes: (Ref) – Dimensions provided for reference only. No dimensions are provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL–PRF–55365/8 specified dimensions

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2 470 V/7343-19 T520V477M002A(1)E040 94 10 40 2200 3 105 2.5 47 A/3216-18 T520A476M2R5A(1)E090 12 8 90 1100 3 105 2.5 56 T/3528-12 T520T566M2R5A(1)E040 14 8 40 1600 3 105 2.5 56 T/3528-12 T520T566M2R5A(1)E070 14 8 70 1200 3 105 2.5 68 A/3216-18 T520A686M2R5A(1)E070 17 8 70 1300 3 105 2.5 68 A/3216-18 T520A686M2R5A(1)E080 17 8 80 1200 3 105 2.5 100 T/3528-12 T520T107M2R5A(1)E040 25 8 40 1600 3 105 2.5 100 T/3528-12 T520T107M2R5A(1)E070 25 8 70 1200 3 105 2.5 100 B/3528-21 T520B107M2R5A(1)E025 25 8 25 2300 3 105 2.5 100 B/3528-21 T520B107M2R5A(1)E035 25 8 35 1900 3 105 2.5 100 B/3528-21 T520B107M2R5A(1)E040 25 8 40 1800 3 105 2.5 100 B/3528-21 T520B107M2R5A(1)E070 25 8 70 1300 3 105 2.5 150 U/6032-15 T520U157M2R5A(1)E055 38 8 55 1600 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E015 55 8 15 2900 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E018 55 8 18 2700 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E021 55 8 21 2500 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E025 55 8 25 2300 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E030 55 8 30 2100 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E035 55 8 35 1900 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E055 55 8 55 1500 3 105 2.5 220 B/3528-21 T520B227M2R5A(1)E070 55 8 70 1300 3 105 2.5 220 T/3528-12 T520T227M2R5A(1)E070 55 10 70 1225 3 105 2.5 220 U/6032-15 T520U227M2R5A(1)E055 55 8 55 1600 3 105 2.5 220 C/6032-28 T520C227M2R5A(1)E025 55 8 25 2600 3 105 2.5 220 C/6032-28 T520C227M2R5A(1)E045 55 8 45 1900 3 105 2.5 220 W/7343-15 T520W227M2R5A(1)E025 55 10 25 2700 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E006 55 10 6 5600 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E007 55 10 7 5200 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E009 55 10 9 4600 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E012 55 10 12 3900 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E015 55 10 15 3500 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E025 55 10 25 2700 3 105 2.5 220 V/7343-19 T520V227M2R5A(1)E045 55 10 45 2000 3 105 2.5 220 D/7343-31 T520D227M2R5A(1)E007 55 10 7 5700 3 105 2.5 220 D/7343-31 T520D227M2R5A(1)E040 55 10 40 2400 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E012 83 8 12 2700 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E015 83 8 15 2900 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E018 83 8 18 2700 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E035 83 8 35 1900 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E045 83 8 45 1700 3 105 2.5 330 B/3528-21 T520B337M2R5A(1)E070 83 8 70 1300 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E015 83 8 15 3300 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E018 83 8 18 3000 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E025 83 8 25 2600 3 105 2.5 330 C/6032-28 T520C337M2R5A(1)E045 83 8 45 1900 3 105 2.5 330 L/6032-19 T520L337M2R5A(1)E009 83 8 9 4100 3 105 2.5 330 L/6032-19 T520L337M2R5A(1)E012 83 8 12 3500 3 105 2.5 330 L/6032-19 T520L337M2R5A(1)E025 83 8 25 2400 3 105 2.5 330 W/7343-15 T520W337M2R5A(1)E015 83 10 15 3500 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp Table 1 – Ratings & Part Number Reference

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 2.5 330 W/7343-15 T520W337M2R5A(1)E025 83 10 25 2700 3 105 2.5 330 W/7343-15 T520W337M2R5A(1)E040 83 10 40 2100 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E006 83 10 6 5600 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E007 83 10 7 5200 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E009 83 10 9 4600 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E012 83 10 12 3900 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E015 83 10 15 3500 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E018 83 10 18 3200 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E025 83 10 25 2700 3 105 2.5 330 V/7343-19 T520V337M2R5A(1)E040 83 10 40 2200 3 105 2.5 330 D/7343-31 T520D337M2R5A(1)E006 83 10 6 6100 3 105 2.5 330 D/7343-31 T520D337M2R5A(1)E007 83 10 7 5700 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E006 118 10 6 5600 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E007 118 10 7 5200 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E009 118 10 9 4600 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E012 118 10 12 3900 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E015 118 10 15 3500 3 105 2.5 470 V/7343-19 T520V477M2R5A(1)E018 118 10 18 3200 3 105 2.5 470 C/6032-28 T520C477M2R5A(1)E025 118 8 25 2600 3 105 2.5 470 C/6032-28 T520C477M2R5A(1)E045 118 8 45 1900 3 105 2.5 470 D/7343-31 T520D477M2R5A(1)E006 118 10 6 6100 3 105 2.5 470 D/7343-31 T520D477M2R5A(1)E007 118 10 7 5700 3 105 2.5 470 D/7343-31 T520D477M2R5A(1)E009 118 10 9 5000 3 105 2.5 680 D/7343-31 T520D687M2R5A(1)E010 170 10 10 4700 3 105 2.5 680 D/7343-31 T520D687M2R5A(1)E015 170 10 15 3900 3 105 2.5 680 D/7343-31 T520D687M2R5A(1)E040 170 10 40 2400 3 105 2.5 680 Y/7343-40 T520Y687M2R5A(1)E015 170 10 15 4000 3 105 2.5 680 Y/7343-40 T520Y687M2R5A(1)E025 170 10 25 3100 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E015 250 10 15 3900 3 105 2.5 1000 D/7343-31 T520D108M2R5A(1)E030 250 10 30 2700 3 105 2.5 1000 Y/7343-40 T520Y108M2R5A(1)E010 250 10 10 4900 3 105 2.5 1000 Y/7343-40 T520Y108M2R5A(1)E015 250 10 15 4000 3 105 2.5 1000 Y/7343-40 T520Y108M2R5A(1)E025 250 10 25 3100 3 105 2.5 1000 X/7343-43 T520X108M2R5A(1)E010 250 10 10 5000 3 105 3 100 B/3528-21 T520B107M003A(1)E025 30 8 25 2300 3 105 3 100 B/3528-21 T520B107M003A(1)E035 30 8 35 1900 3 105 3 100 B/3528-21 T520B107M003A(1)E040 30 8 40 1800 3 105 3 100 B/3528-21 T520B107M003A(1)E070 30 8 70 1300 3 105 3 150 B/3528-21 T520B157M003A(1)E025 45 8 25 2300 3 105 3 150 B/3528-21 T520B157M003A(1)E035 45 8 35 1900 3 105 3 150 B/3528-21 T520B157M003A(1)E040 45 8 40 1800 3 105 3 150 B/3528-21 T520B157M003A(1)E070 45 8 70 1300 3 105 3 330 V/7343-19 T520V337M003A(1)E009 99 10 9 4600 3 105 3 330 V/7343-19 T520V337M003A(1)E012 99 10 12 3900 3 105 3 330 V/7343-19 T520V337M003A(1)E015 99 10 15 3500 3 105 3 330 V/7343-19 T520V337M003A(1)E025 99 10 25 2700 3 105 3 680 D/7343-31 T520D687M003A(1)E015 204 10 15 3900 3 105 3 680 D/7343-31 T520D687M003A(1)E040 204 10 40 2400 3 105 3 1000 X/7343-43 T520X108M003A(1)E015 300 10 15 4100 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp Table 1 – Ratings & Part Number Reference cont'd

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 3 1000 X/7343-43 T520X108M003A(1)E030 300 10 30 2900 3 105 4 15 T/3528-12 T520T156M004A(1)E100 6 8 100 1000 3 105 4 33 A/3216-18 T520A336M004A(1)E070 13 8 70 1300 3 105 4 33 A/3216-18 T520A336M004A(1)E080 13 8 80 1200 3 105 4 47 A/3216-18 T520A476M004A(1)E070 19 8 70 1300 3 105 4 47 A/3216-18 T520A476M004A(1)E080 19 8 80 1200 3 105 4 47 T/3528-12 T520T476M004A(1)E070 19 8 70 1200 3 105 4 68 T/3528-12 T520T686M004A(1)E070 27 8 70 1200 3 105 4 68 B/3528-21 T520B686M004A(1)E025 27 8 25 2300 3 105 4 68 B/3528-21 T520B686M004A(1)E035 27 8 35 1900 3 105 4 68 B/3528-21 T520B686M004A(1)E040 27 8 40 1800 3 105 4 68 B/3528-21 T520B686M004A(1)E070 27 8 70 1300 3 105 4 68 U/6032-15 T520U686M004A(1)E055 27 8 55 1600 3 105 4 100 A/3216-18 T520A107M004A(1)E150 40 8 150 900 3 105 4 100 A/3216-18 T520A107M004A(1)E200 40 8 200 700 3 105 4 100 T/3528-12 T520T107M004A(1)E070 40 8 70 1200 3 105 4 100 T/3528-12 T520T107M004A(1)E150 40 8 150 800 3 105 4 100 B/3528-21 T520B107M004A(1)E025 40 8 25 2300 3 105 4 100 B/3528-21 T520B107M004A(1)E035 40 8 35 1900 3 105 4 100 B/3528-21 T520B107M004A(1)E040 40 8 40 1800 3 105 4 100 B/3528-21 T520B107M004A(1)E070 40 8 70 1300 3 105 4 100 U/6032-15 T520U107M004A(1)E055 40 8 55 1600 3 105 4 150 B/3528-21 T520B157M004A(1)E015 60 8 15 2900 3 105 4 150 B/3528-21 T520B157M004A(1)E018 60 8 18 2700 3 105 4 150 B/3528-21 T520B157M004A(1)E025 60 8 25 2300 3 105 4 150 B/3528-21 T520B157M004A(1)E030 60 8 30 2100 3 105 4 150 B/3528-21 T520B157M004A(1)E035 60 8 35 1900 3 105 4 150 B/3528-21 T520B157M004A(1)E040 60 8 40 1800 3 105 4 150 B/3528-21 T520B157M004A(1)E070 60 8 70 1300 3 105 4 150 U/6032-15 T520U157M004A(1)E055 60 8 55 1600 3 105 4 150 C/6032-28 T520C157M004A(1)E015 60 8 15 3300 3 105 4 150 C/6032-28 T520C157M004A(1)E025 60 8 25 2600 3 105 4 150 C/6032-28 T520C157M004A(1)E045 60 8 45 1900 3 105 4 150 C/6032-28 T520C157M004A(1)E100 60 8 100 1300 3 105 4 150 V/7343-19 T520V157M004A(1)E007 60 10 7 5200 3 105 4 150 V/7343-19 T520V157M004A(1)E009 60 10 9 4600 3 105 4 150 V/7343-19 T520V157M004A(1)E012 60 10 12 3900 3 105 4 150 V/7343-19 T520V157M004A(1)E015 60 10 15 3500 3 105 4 150 V/7343-19 T520V157M004A(1)E025 60 10 25 2700 3 105 4 150 D/7343-31 T520D157M004A(1)E007 60 10 7 5700 3 105 4 220 B/3528-21 T520B227M004A(1)E035 88 8 35 1900 3 105 4 220 B/3528-21 T520B227M004A(1)E045 88 8 45 1700 3 105 4 220 B/3528-21 T520B227M004A(1)E070 88 8 70 1300 3 105 4 220 C/6032-28 T520C227M004A(1)E015 88 8 15 3300 3 105 4 220 C/6032-28 T520C227M004A(1)E018 88 8 18 3000 3 105 4 220 C/6032-28 T520C227M004A(1)E025 88 8 25 2600 3 105 4 220 C/6032-28 T520C227M004A(1)E045 88 8 45 1900 3 105 4 220 C/6032-28 T520C227M004A(1)E055 88 8 55 1700 3 105 4 220 L/6032-19 T520L227M004A(1)E012 88 8 12 3500 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp Table 1 – Ratings & Part Number Reference cont'd

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 4 220 L/6032-19 T520L227M004A(1)E025 88 8 25 2400 3 105 4 220 W/7343-15 T520W227M004A(1)E025 88 10 25 2700 3 105 4 220 W/7343-15 T520W227M004A(1)E040 88 10 40 2100 3 105 4 220 V/7343-19 T520V227M004A(1)E006 88 10 6 5600 3 105 4 220 V/7343-19 T520V227M004A(1)E007 88 10 7 5200 3 105 4 220 V/7343-19 T520V227M004A(1)E009 88 10 9 4600 3 105 4 220 V/7343-19 T520V227M004A(1)E012 88 10 12 3900 3 105 4 220 V/7343-19 T520V227M004A(1)E015 88 10 15 3500 3 105 4 220 V/7343-19 T520V227M004A(1)E018 88 10 18 3200 3 105 4 220 V/7343-19 T520V227M004A(1)E025 88 10 25 2700 3 105 4 220 V/7343-19 T520V227M004A(1)E040 88 10 40 2200 3 105 4 220 V/7343-19 T520V227M004A(1)E045 88 10 45 2000 3 105 4 220 D/7343-31 T520D227M004A(1)E006 88 10 6 6100 3 105 4 220 D/7343-31 T520D227M004A(1)E007 88 10 7 5700 3 105 4 220 D/7343-31 T520D227M004A(1)E012 88 10 12 4300 3 105 4 220 D/7343-31 T520D227M004A(1)E065 88 10 65 1900 3 105 4 330 C/6032-28 T520C337M004A(1)E025 132 8 25 2600 3 105 4 330 C/6032-28 T520C337M004A(1)E045 132 8 45 1900 3 105 4 330 V/7343-19 T520V337M004A(1)E007 132 10 7 5200 3 105 4 330 V/7343-19 T520V337M004A(1)E009 132 10 9 4600 3 105 4 330 V/7343-19 T520V337M004A(1)E012 132 10 12 3900 3 105 4 330 V/7343-19 T520V337M004A(1)E018 132 10 18 3200 3 105 4 330 V/7343-19 T520V337M004A(1)E025 132 10 25 2700 3 105 4 330 V/7343-19 T520V337M004A(1)E040 132 10 40 2200 3 105 4 330 D/7343-31 T520D337M004A(1)E006 132 10 6 6100 3 105 4 330 D/7343-31 T520D337M004A(1)E007 132 10 7 5700 3 105 4 330 D/7343-31 T520D337M004A(1)E009 132 10 9 5000 3 105 4 330 D/7343-31 T520D337M004A(1)E012 132 10 12 4300 3 105 4 330 D/7343-31 T520D337M004A(1)E015 132 10 15 3900 3 105 4 330 D/7343-31 T520D337M004A(1)E040 132 10 40 2400 3 105 4 330 D/7343-31 T520D337M004A(1)E045 132 10 45 2200 3 105 4 470 D/7343-31 T520D477M004A(1)E010 188 10 10 4700 3 105 4 470 D/7343-31 T520D477M004A(1)E012 188 10 12 4300 3 105 4 470 D/7343-31 T520D477M004A(1)E015 188 10 15 3900 3 105 4 470 D/7343-31 T520D477M004A(1)E018 188 10 18 3500 3 105 4 470 D/7343-31 T520D477M004A(1)E025 188 10 25 3000 3 105 4 470 D/7343-31 T520D477M004A(1)E040 188 10 40 2400 3 105 4 680 D/7343-31 T520D687M004A(1)E012 272 10 12 4300 3 105 4 680 D/7343-31 T520D687M004A(1)E015 272 10 15 3900 3 105 4 680 D/7343-31 T520D687M004A(1)E025 272 10 25 3000 3 105 4 680 Y/7343-40 T520Y687M004A(1)E010 272 10 10 4900 3 105 4 680 Y/7343-40 T520Y687M004A(1)E015 272 10 15 4000 3 105 4 680 Y/7343-40 T520Y687M004A(1)E025 272 10 25 3100 3 105 4 680 X/7343-43 T520X687M004A(1)E010 272 10 10 5000 3 105 4 680 X/7343-43 T520X687M004A(1)E015 272 10 15 4100 3 105 4 680 X/7343-43 T520X687M004A(1)E035 272 10 35 2700 3 105 6.3 15 T/3528-12 T520T156M006A(1)E100 9 8 100 1000 3 105 6.3 22 A/3216-18 T520A226M006A(1)E090 14 8 90 1100 3 105 6.3 22 A/3216-18 T520A226M006A(1)E100 14 8 100 1100 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp Table 1 – Ratings & Part Number Reference cont'd

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 6.3 22 T/3528-12 T520T226M006A(1)E100 14 8 100 1000 3 105 6.3 33 A/3216-18 T520A336M006A(1)E070 21 8 70 1300 3 105 6.3 33 A/3216-18 T520A336M006A(1)E080 21 8 80 1200 3 105 6.3 33 A/3216-18 T520A336M006A(1)E120 21 8 120 1000 3 105 6.3 33 T/3528-12 T520T336M006A(1)E070 21 8 70 1200 3 105 6.3 33 B/3528-21 T520B336M006A(1)E025 21 8 25 2300 3 105 6.3 33 B/3528-21 T520B336M006A(1)E035 21 8 35 1900 3 105 6.3 33 B/3528-21 T520B336M006A(1)E040 21 8 40 1800 3 105 6.3 33 B/3528-21 T520B336M006A(1)E070 21 8 70 1300 3 105 6.3 33 C/6032-28 T520C336M006A(1)E100 21 8 100 1300 3 105 6.3 47 A/3216-18 T520A476M006A(1)E150 30 8 150 900 3 105 6.3 47 T/3528-12 T520T476M006A(1)E040 30 8 40 1600 3 105 6.3 47 T/3528-12 T520T476M006A(1)E070 30 8 70 1200 3 105 6.3 47 B/3528-21 T520B476M006A(1)E025 30 8 25 2300 3 105 6.3 47 B/3528-21 T520B476M006A(1)E035 30 8 35 1900 3 105 6.3 47 B/3528-21 T520B476M006A(1)E040 30 8 40 1800 3 105 6.3 47 B/3528-21 T520B476M006A(1)E070 30 8 70 1300 3 105 6.3 68 A/3216-18 T520A686M006A(1)E150 43 8 150 900 3 105 6.3 68 T/3528-12 T520T686M006A(1)E070 43 8 70 1200 3 105 6.3 68 T/3528-12 T520T686M006A(1)E150 43 8 150 800 3 105 6.3 68 B/3528-21 T520B686M006A(1)E025 43 8 25 2300 3 105 6.3 68 B/3528-21 T520B686M006A(1)E035 43 8 35 1900 3 105 6.3 68 B/3528-21 T520B686M006A(1)E040 43 8 40 1800 3 105 6.3 68 B/3528-21 T520B686M006A(1)E070 43 8 70 1300 3 105 6.3 68 U/6032-15 T520U686M006A(1)E055 43 8 55 1600 3 105 6.3 68 U/6032-15 T520U686M006A(1)E070 43 8 70 1400 3 105 6.3 68 C/6032-28 T520C686M006A(1)E100 43 8 100 1300 3 105 6.3 100 A/3216-18 T520A107M006ATE070 63 8 70 1035 3 105 6.3 100 T/3528-12 T520T107M006A(1)E070 63 8 70 1200 3 105 6.3 100 B/3528-21 T520B107M006A(1)E015 63 8 15 2900 3 105 6.3 100 B/3528-21 T520B107M006A(1)E018 63 8 18 2700 3 105 6.3 100 B/3528-21 T520B107M006A(1)E025 63 8 25 2300 3 105 6.3 100 B/3528-21 T520B107M006A(1)E035 63 8 35 1900 3 105 6.3 100 B/3528-21 T520B107M006A(1)E040 63 8 40 1800 3 105 6.3 100 B/3528-21 T520B107M006A(1)E045 63 8 45 1700 3 105 6.3 100 B/3528-21 T520B107M006A(1)E070 63 8 70 1300 3 105 6.3 100 U/6032-15 T520U107M006A(1)E055 63 8 55 1600 3 105 6.3 100 W/7343-15 T520W107M006A(1)E040 63 10 40 2100 3 105 6.3 100 V/7343-19 T520V107M006A(1)E009 63 10 9 4600 3 105 6.3 100 V/7343-19 T520V107M006A(1)E012 63 10 12 3900 3 105 6.3 100 V/7343-19 T520V107M006A(1)E015 63 10 15 3500 3 105 6.3 100 V/7343-19 T520V107M006A(1)E045 63 10 45 2000 3 105 6.3 100 C/6032-28 T520C107M006A(1)E025 63 8 25 2600 3 105 6.3 100 C/6032-28 T520C107M006A(1)E045 63 8 45 1900 3 105 6.3 120 B/3528-21 T520B127M006A(1)E035 76 8 35 1900 3 105 6.3 150 M/3528-15 T520M157M006A(1)E070 95 8 70 1300 3 105 6.3 150 M/3528-15 T520M157M006A(1)E150 95 8 150 900 3 105 6.3 150 M/3528-15 T520M157M006A(1)E200 95 8 200 800 3 105 6.3 150 B/3528-21 T520B157M006A(1)E025 95 8 25 2300 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp Table 1 – Ratings & Part Number Reference cont'd

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 6.3 150 B/3528-21 T520B157M006A(1)E035 95 8 35 1900 3 105 6.3 150 B/3528-21 T520B157M006A(1)E045 95 8 45 1700 3 105 6.3 150 B/3528-21 T520B157M006A(1)E070 95 8 70 1300 3 105 6.3 150 C/6032-28 T520C157M006A(1)E015 95 8 15 3300 3 105 6.3 150 C/6032-28 T520C157M006A(1)E025 95 8 25 2600 3 105 6.3 150 C/6032-28 T520C157M006A(1)E045 95 8 45 1900 3 105 6.3 150 C/6032-28 T520C157M006A(1)E055 95 8 55 1700 3 105 6.3 150 U/6032-15 T520U157M006A(1)E045 95 8 45 1700 3 105 6.3 150 U/6032-15 T520U157M006A(1)E055 95 8 55 1600 3 105 6.3 150 L/6032-19 T520L157M006A(1)E012 95 8 12 3500 3 105 6.3 150 L/6032-19 T520L157M006A(1)E025 95 8 25 2400 3 105 6.3 150 W/7343-15 T520W157M006A(1)E025 95 10 25 2700 3 105 6.3 150 W/7343-15 T520W157M006A(1)E040 95 10 40 2100 3 105 6.3 150 V/7343-19 T520V157M006A(1)E006 95 10 6 5600 3 105 6.3 150 V/7343-19 T520V157M006A(1)E007 95 10 7 5200 3 105 6.3 150 V/7343-19 T520V157M006A(1)E009 95 10 9 4600 3 105 6.3 150 V/7343-19 T520V157M006A(1)E012 95 10 12 3900 3 105 6.3 150 V/7343-19 T520V157M006A(1)E015 95 10 15 3500 3 105 6.3 150 V/7343-19 T520V157M006A(1)E018 95 10 18 3200 3 105 6.3 150 V/7343-19 T520V157M006A(1)E025 95 10 25 2700 3 105 6.3 150 V/7343-19 T520V157M006A(1)E040 95 10 40 2200 3 105 6.3 150 V/7343-19 T520V157M006A(1)E045 95 10 45 2000 3 105 6.3 150 D/7343-31 T520D157M006A(1)E006 95 10 6 6100 3 105 6.3 150 D/7343-31 T520D157M006A(1)E007 95 10 7 5700 3 105 6.3 150 D/7343-31 T520D157M006A(1)E015 95 10 15 3900 3 105 6.3 150 D/7343-31 T520D157M006A(1)E025 95 10 25 3000 3 105 6.3 150 D/7343-31 T520D157M006A(1)E055 95 10 55 2000 3 105 6.3 220 B/3528-21 T520B227M006A(1)E025 139 8 25 2300 3 105 6.3 220 B/3528-21 T520B227M006A(1)E035 139 8 35 1900 3 105 6.3 220 B/3528-21 T520B227M006A(1)E045 139 8 45 1700 3 105 6.3 220 B/3528-21 T520B227M006A(1)E070 139 8 70 1300 3 105 6.3 220 C/6032-28 T520C227M006A(1)E015 139 8 15 3300 3 105 6.3 220 C/6032-28 T520C227M006A(1)E018 139 8 18 3000 3 105 6.3 220 C/6032-28 T520C227M006A(1)E025 139 8 25 2600 3 105 6.3 220 C/6032-28 T520C227M006A(1)E045 139 8 45 1900 3 105 6.3 220 V/7343-19 T520V227M006A(1)E007 139 10 7 5200 3 105 6.3 220 V/7343-19 T520V227M006A(1)E009 139 10 9 4600 3 105 6.3 220 V/7343-19 T520V227M006A(1)E012 139 10 12 3900 3 105 6.3 220 V/7343-19 T520V227M006A(1)E015 139 10 15 3500 3 105 6.3 220 V/7343-19 T520V227M006A(1)E018 139 10 18 3200 3 105 6.3 220 V/7343-19 T520V227M006A(1)E025 139 10 25 2700 3 105 6.3 220 V/7343-19 T520V227M006A(1)E040 139 10 40 2200 3 105 6.3 220 D/7343-31 T520D227M006A(1)E006 139 10 6 6100 3 105 6.3 220 D/7343-31 T520D227M006A(1)E007 139 10 7 5700 3 105 6.3 220 D/7343-31 T520D227M006A(1)E009 139 10 9 5000 3 105 6.3 220 D/7343-31 T520D227M006A(1)E015 139 10 15 3900 3 105 6.3 220 D/7343-31 T520D227M006A(1)E018 139 10 18 3500 3 105 6.3 220 D/7343-31 T520D227M006A(1)E025 139 10 25 3000 3 105 6.3 220 D/7343-31 T520D227M006A(1)E040 139 10 40 2400 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp Table 1 – Ratings & Part Number Reference cont'd

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 6.3 220 D/7343-31 T520D227M006A(1)E050 139 10 50 2100 3 105 6.3 330 V/7343-19 T520V337M006A(1)E015 208 10 15 3500 3 105 6.3 330 V/7343-19 T520V337M006A(1)E018 208 10 18 3200 3 105 6.3 330 V/7343-19 T520V337M006A(1)E025 208 10 25 2700 3 105 6.3 330 V/7343-19 T520V337M006A(1)E040 208 10 40 2200 3 105 6.3 330 V/7343-19 T520V337M006A(1)E045 208 10 45 2000 3 105 6.3 330 D/7343-31 T520D337M006A(1)E009 208 10 9 5000 3 105 6.3 330 D/7343-31 T520D337M006A(1)E010 208 10 10 4700 3 105 6.3 330 D/7343-31 T520D337M006A(1)E015 208 10 15 3900 3 105 6.3 330 D/7343-31 T520D337M006A(1)E018 208 10 18 3500 3 105 6.3 330 D/7343-31 T520D337M006A(1)E025 208 10 25 3000 3 105 6.3 330 D/7343-31 T520D337M006A(1)E040 208 10 40 2400 3 105 6.3 330 D/7343-31 T520D337M006A(1)E045 208 10 45 2200 3 105 6.3 330 Y/7343-40 T520Y337M006A(1)E010 208 10 10 4900 3 105 6.3 330 Y/7343-40 T520Y337M006A(1)E015 208 10 15 4000 3 105 6.3 330 Y/7343-40 T520Y337M006A(1)E025 208 10 25 3100 3 105 6.3 330 Y/7343-40 T520Y337M006A(1)E040 208 10 40 2500 3 105 6.3 470 W/7343-15 T520W477M006A(1)E055 296 10 55 1800 3 85 6.3 470 W/7343-15 T520W477M006A(1)E035 296 9 35 2300 3 85 6.3 470 V/7343-19 T520V477M006A(1)E055 296 10 55 1800 3 85 6.3 470 V/7343-19 T520V477M006A(1)E035 282 10 35 2300 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E010 296 10 10 4900 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E015 296 10 15 4000 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E018 296 10 18 3700 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E025 296 10 25 3100 3 105 6.3 470 Y/7343-40 T520Y477M006A(1)E035 296 10 35 2600 3 105 6.3 470 D/7343-31 T520D477M006A(1)E015 296 10 15 3900 3 105 6.3 470 D/7343-31 T520D477M006A(1)E025 296 10 25 3000 3 105 6.3 470 D/7343-31 T520D477M006A(1)E030 296 10 30 2700 3 105 6.3 470 X/7343-43 T520X477M006A(1)E010 296 10 10 5000 3 105 6.3 470 X/7343-43 T520X477M006A(1)E018 296 10 18 3700 3 105 6.3 470 X/7343-43 T520X477M006A(1)E035 296 10 35 2700 3 105 6.3 470 X/7343-43 T520X477M006A(1)E040 296 10 40 2500 3 105 6.3 680 X/7343-43 T520X687M006A(1)E025 428 10 25 3100 3 105 6.3 1000 H/7260-20 T520H108M006A(1)E055 630 20 55 1800 3 85 6.3 1500 H/7260-20 T520H158M006A(1)E055 945 20 55 1800 3 85 8 33 T/3528-12 T520T336M008A(1)E070 26 8 70 1200 3 105 8 33 T/3528-12 T520T336M008A(1)E080 26 8 80 1100 3 105 8 33 B/3528-21 T520B336M008A(1)E025 26 8 25 2300 3 105 8 33 B/3528-21 T520B336M008A(1)E035 26 8 35 1900 3 105 8 33 B/3528-21 T520B336M008A(1)E040 26 8 40 1800 3 105 8 33 B/3528-21 T520B336M008A(1)E070 26 8 70 1300 3 105 8 33 U/6032-15 T520U336M008A(1)E070 26 8 70 1400 3 105 8 47 B/3528-21 T520B476M008A(1)E035 38 8 35 1900 3 105 8 47 B/3528-21 T520B476M008A(1)E070 38 8 70 1300 3 105 8 82 C/6032-28 T520C826M008A(1)E025 66 8 25 2600 3 105 8 82 C/6032-28 T520C826M008A(1)E045 66 8 45 1900 3 105 8 150 D/7343-31 T520D157M008A(1)E025 120 10 25 3000 3 105 8 150 D/7343-31 T520D157M008A(1)E040 120 10 40 2400 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 8 150 D/7343-31 T520D157M008A(1)E055 120 10 55 2000 3 105 8 150 V/7343-19 T520V157M008A(1)E040 120 10 40 2200 3 105 10 10 A/3216-18 T520A106M010A(1)E080 10 8 80 1200 3 105 10 15 A/3216-18 T520A156M010A(1)E080 15 8 80 1200 3 105 10 22 A/3216-18 T520A226M010A(1)E080 22 8 80 1200 3 105 10 33 T/3528-12 T520T336M010A(1)E040 33 8 40 1600 3 105 10 33 T/3528-12 T520T336M010A(1)E070 33 8 70 1200 3 105 10 33 T/3528-12 T520T336M010A(1)E080 33 8 80 1100 3 105 10 33 B/3528-21 T520B336M010A(1)E025 33 8 25 2300 3 105 10 33 B/3528-21 T520B336M010A(1)E035 33 8 35 1900 3 105 10 33 B/3528-21 T520B336M010A(1)E040 33 8 40 1800 3 105 10 33 B/3528-21 T520B336M010A(1)E070 33 8 70 1300 3 105 10 33 U/6032-15 T520U336M010A(1)E070 33 8 70 1400 3 105 10 47 B/3528-21 T520B476M010A(1)E035 47 8 35 1900 3 105 10 47 B/3528-21 T520B476M010A(1)E070 47 8 70 1300 3 105 10 47 U/6032-15 T520U476M010A(1)E055 47 8 55 1600 3 105 10 47 C/6032-28 T520C476M010A(1)E100 47 8 100 1300 3 105 10 68 U/6032-15 T520U686M010A(1)E055 68 8 55 1600 3 105 10 68 W/7343-15 T520W686M010A(1)E025 68 10 25 2700 3 105 10 68 W/7343-15 T520W686M010A(1)E040 68 10 40 2100 3 105 10 68 C/6032-28 T520C686M010A(1)E045 68 8 45 1900 3 105 10 68 V/7343-19 T520V686M010A(1)E025 68 10 25 2700 3 105 10 68 V/7343-19 T520V686M010A(1)E040 68 10 40 2200 3 105 10 68 V/7343-19 T520V686M010A(1)E045 68 10 45 2000 3 105 10 68 V/7343-19 T520V686M010A(1)E060 68 10 60 1800 3 105 10 68 V/7343-19 T520V686M010A(1)E100 68 10 100 1400 3 105 10 68 D/7343-31 T520D686M010A(1)E100 68 10 100 1500 3 105 10 100 C/6032-28 T520C107M010A(1)E025 100 8 25 2600 3 105 10 100 C/6032-28 T520C107M010A(1)E045 100 8 45 1900 3 105 10 100 L/6032-19 T520L107M010A(1)E025 100 8 25 2400 3 105 10 100 W/7343-15 T520W107M010A(1)E040 100 10 40 2100 3 105 10 100 V/7343-19 T520V107M010A(1)E018 100 10 18 3200 3 105 10 100 V/7343-19 T520V107M010A(1)E025 100 10 25 2700 3 105 10 100 V/7343-19 T520V107M010A(1)E045 100 10 45 2000 3 105 10 100 V/7343-19 T520V107M010A(1)E050 100 10 50 1900 3 105 10 100 D/7343-31 T520D107M010A(1)E018 100 10 18 3500 3 105 10 100 D/7343-31 T520D107M010A(1)E055 100 10 55 2000 3 105 10 100 D/7343-31 T520D107M010A(1)E080 100 10 80 1700 3 105 10 150 C/6032-28 T520C157M010A(1)E055 150 8 55 1700 3 105 10 150 V/7343-19 T520V157M010A(1)E018 150 10 18 3200 3 105 10 150 V/7343-19 T520V157M010A(1)E025 150 10 25 2700 3 105 10 150 V/7343-19 T520V157M010A(1)E040 150 10 40 2200 3 105 10 150 D/7343-31 T520D157M010A(1)E015 150 10 15 3900 3 105 10 150 D/7343-31 T520D157M010A(1)E018 150 10 18 3500 3 105 10 150 D/7343-31 T520D157M010A(1)E025 150 10 25 3000 3 105 10 150 D/7343-31 T520D157M010A(1)E040 150 10 40 2400 3 105 10 150 D/7343-31 T520D157M010A(1)E055 150 10 55 2000 3 105 10 150 Y/7343-40 T520Y157M010A(1)E015 150 10 15 4000 3 105 10 150 Y/7343-40 T520Y157M010A(1)E018 150 10 18 3700 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp Table 1 – Ratings & Part Number Reference cont'd

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Table 1 – Ratings & Part Number Reference cont'd (1) Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H). Also available on large (13 inch) reels. Add 7280 to the end of the part number. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating. Substitutions can include better than series. Blue color text denotes "Under Development" Bold text denotes black epoxy product Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) 10 150 Y/7343-40 T520Y157M010A(1)E025 150 10 25 3100 3 105 10 220 V/7343-19 T520V227M010A(1)E045 220 10 45 2000 3 105 10 220 V/7343-19 T520V227M010A(1)E025 220 10 25 2700 3 105 10 220 D/7343-31 T520D227M010A(1)E018 220 10 18 3500 3 105 10 220 D/7343-31 T520D227M010A(1)E025 220 10 25 3000 3 105 10 220 D/7343-31 T520D227M010A(1)E040 220 10 40 2400 3 105 10 220 Y/7343-40 T520Y227M010A(1)E040 220 10 40 2500 3 105 10 330 Y/7343-40 T520Y337M010A(1)E010 330 10 10 4900 3 105 10 330 Y/7343-40 T520Y337M010A(1)E015 330 10 15 4000 3 105 10 330 Y/7343-40 T520Y337M010A(1)E035 330 10 35 2600 3 105 10 330 X/7343-43 T520X337M010A(1)E010 330 10 10 5000 3 105 10 330 X/7343-43 T520X337M010A(1)E025 330 10 25 3100 3 105 10 330 X/7343-43 T520X337M010A(1)E040 330 10 40 2500 3 105 11 47 Q/7343-12 T520Q476M011A(1)E040 52 10 40 4500 3 105 12.5 10 T/3528-12 T520T106M12RA(1)E150 13 8 150 800 3 105 12.5 15 T/3528-12 T520T156M12RA(1)E080 19 8 80 1100 3 105 16 10 B/3528-21 T520B106M016A(1)E100 16 8 100 1100 3 105 16 22 C/6032-28 T520C226M016A(1)E080 35 8 80 1400 3 105 16 33 W/7343-15 T520W336M016A(1)E045 53 10 45 2000 3 105 16 33 V/7343-19 T520V336M016A(1)E045 53 10 45 2000 3 105 16 33 V/7343-19 T520V336M016A(1)E060 53 10 60 1800 3 105 16 33 V/7343-19 T520V336M016A(1)E070 53 10 70 1600 3 105 16 47 W/7343-15 T520W476M016A(1)E045 75 10 45 2000 3 105 16 47 V/7343-19 T520V476M016A(1)E045 75 10 45 2000 3 105 16 47 V/7343-19 T520V476M016A(1)E070 75 10 70 1600 3 105 16 47 D/7343-31 T520D476M016A(1)E035 75 10 35 2500 3 105 16 47 D/7343-31 T520D476M016A(1)E070 75 10 70 1800 3 105 16 68 D/7343-31 T520D686M016A(1)E050 109 10 50 2100 3 105 16 150 X/7343-43 T520X157M016A(1)E040 240 10 40 2500 3 105 20 22 V/7343-19 T520V226M020A(1)E040 44 10 40 2200 3 105 20 22 V/7343-19 T520V226M020A(1)E045 44 10 45 2000 3 105 20 22 V/7343-19 T520V226M020A(1)E090 44 10 90 1400 3 105 25 15 V/7343-19 T520V156M025A(1)E090 38 10 90 1400 3 105 25 15 D/7343-31 T520D156M025A(1)E060 38 10 60 1900 3 105 25 15 D/7343-31 T520D156M025A(1)E080 38 10 80 1700 3 105 VDC µF KEMET/EIA (See below for part options) µA @ 20°C Maximum/5 Minutes % @ 20°C 120 Hz Maximum mΩ @ 20°C 100 kHz Maximum (mA) 45°C 100 kHz Temperature ≤ 260ºC (ºC) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current Moisture Sensitivity Rated Temp

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Derating Guidelines Voltage Rating Maximum Recommended Steady State Voltage Maximum Recommended Transient Voltage (1 ms – 1 µs) -55°C to 105°C 2. V ≤ VR ≤ 10 V 90% of VR VR

12.5 V ≤ VR ≤ 25 V 80% of VR VR

VR= Rated Voltage Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Power Dissipation T ≤ 45°C 45° C < T ≤ 85°C 85°C < T ≤ 125°C 1.00 0.70 0.25 T= Environmental Temperature Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation(watts) KEMET Series and Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts @ 45°C with +30°C Rise T520T 3528–12 105 T520M 3528–15 120 T520A 3216–18 112 T520B 3528–21 127 T520U 6032–15 135 T520L 6032–19 150 T520C 6032–28 165 T520W 7343–15 180 T520V /T522V 7343–19 187 T520Q 7343-12 170 T520D 7343–31 225 T520Y/T522Y 7343–40 241 T520X 7343–43 247 T520H 7360–20 187 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. Maximum Transient Voltage Recommended Application Voltage < = 10 V Recommended Application Voltage > 10 V 50% 55% 60% 65% 70% 75% 80% 85% 90% 95% 100% -55 25 85 105 % Rated Voltage Temperature (°C) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Reverse Voltage Polymer tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated Voltage 55°C 10% of Rated Voltage 85°C 5% of Rated Voltage 105°C 3% of Rated Voltage 125°C* 1% of Rated Voltage *For series rated to 125°C Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Time Temperature Tsmin 25ºC to Peak tL tS tP Tsmax TL TP Maximum Ramp Up Rate = 3ºC/seconds Maximum Ramp Down Rate = 6ºC/seconds Soldering Process KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the gold- colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (T Smin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (T L to TP) 3°C/seconds maximum 3°C/seconds maximum Liquidous Temperature (T L) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 60 – 150 seconds Peak Temperature (TP) 220°C* 235°C** 250°C* 260°C** Time within 5°C of Maximum Peak Temperature (tP) 20 seconds maximum 30 seconds maximum Ramp-down Rate (T P to TL) 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z Construction Polymer /Ta2O5/Ta Silver Adhesive Carbon Silver Paint Tantalum Wire Weld Leadframe (-Cathode) Leadframe (+Anode)

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Capacitor Marking (KO) KEMET Organic Polymer Rated Voltage 476 16 K 230 KO Polarity Indicator (+) Picofarad Code KEMET ID Date Code* * 230 = 30 th week of 2012 (KO) KEMET Organic Polymer Rated Voltage 476 16V KO Polarity Indicator (+) Picofarad Code KEMET ID Date Code* K C6 49 Internal Code Polarity Indicator (+) Voltage and Capacitance Code *Date Code E jA8 Storage All KO-CAP Series are shipped in moisture barrier bags with a desiccant and moisture indicator card. These series are classified as MSL3 (Moisture Sensitivity Level 3). Product contained within the moisture barrier bags should be stored in normal working environments with temperatures not to exceed 40°C and humidity not in excess of 60% RH. Date Code* Year Month X = 2009 1 = Jan 7 = Jul A = 2010 2 = Feb 8 = Aug B = 2011 3 = Mar 9 = Spt C = 2012 4 = Apr O = Oct D = 2013 5 = May N = Nov E = 2014 6 = Jun D = Dec Date Code * 1st digit = Last number of Year 9 = 2009 0 = 2010 1 = 2011 2 = 2012 3 = 2013 4 = 2014 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year Date Code * Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

2013 A B C D E F G H J K L M

2014 N P Q R S T U V W X Y Z

2015 a b c d e f g h j k l m 2016 n p q r s t u v w x y z Code e g j A Rated Voltage 2.5 V 4 V 6 V 10 V Code J7 N7 S7 W7 A8 N8 Capacitance 22 33 47 68 100 330

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Tape & Reel Packaging Information KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481–1: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Table 3 – Packaging Quantity Case Code Tape Width (mm) 7" Reel* 13" Reel* KEMET EIA R 2012-12 8 2,500 10,000 I 3216-10 8 3,000 12,000 S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 M 3528-15 8 2,000 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 5,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 Q 7343-12 12 1,000 3,000 V 7343-19 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 3,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. * A case with black epoxy only available in 7" reel Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 8 mm (0.315") or or 330 mm (13.0")

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Figure 1 – Embossed (Plastic) Carrier Tape Dimensions Po T F W Center Lines of Cavity Ao Bo User Direction of Unreeling Cover Tape Ko B1 is for tape feeder reference only, including draft concentric about B o. ØD1 ØDo Embossment For cavity size, see Note 1 Table 4 [10 pitches cumulative tolerance on tape ± 0.2 mm] Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 D1 Minimum Note 1 E1 P0 P2 R Reference Note 2 S1 Minimum Note 3 T Maximum T1 Maximum 8 mm 1.5 +0.10/-0.0 1.0 (0.039) 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004)12 mm 1.5 (0.059) (1.181)16 mm Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 ±0.05 (0.138 ±0.002) 4.0 ±0.10 (0.157 ±0.004) 2.5 (0.098) 8.3 (0.327) Note 512 mm Single (4 mm) & Double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 ±0.05 (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) 4.6 (0.181) 12.3 (0.484) 16 mm Triple (12 mm) 12.1 (0.476) 14.25 (0.561) 5.5 ±0.05 (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) 4.6 (0.181) 16.3 (0.642) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 5). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–1, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defi ned by A0, B0 and K0 shall surround the component with suffi cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481–1 for standards relating to more precise taping requirements.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Figure 5 – Reel Dimensions A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm minimum) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/-0.2 20.2 (0.795)12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 8 mm (1.969) 8.4 +1.5/-0.0 14.4 (0.567) Shall accommodate tape width without interference12 mm 12.4 +2.0/-0.0 18.4 (0.724) 22.4 (0.882)

2835 KEMET Way

Simpsonville, SC 29681 Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offi ces Fort Lauderdale, FL Tel: 954-766-2800 North America Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Europe Southern Europe Paris, France Tel: 33-1-4646-1006 Sasso Marconi, Italy Tel: 39-051-939111 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Kamen, Germany Tel: 49-2307-438110 Northern Europe Bishop’s Stortford, United Kingdom Tel: 44-1279-460122 Espoo, Finland Tel: 358-9-5406-5000 Asia Northeast Asia Hong Kong Tel: 852-2305-1168 Shenzhen, China Tel: 86-755-2518-1306 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation.

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2015_T520 • 12/4/2013 KEMET Organic Capacitor (KO-CAP) – T520 Series Polymer Tantalum Other KEMET Resources Tools Resource Location Confi gure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products http://www.kemet.com/products Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers RoHS Statement http://www.kemet.com/rohs Quality Documents http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request http://www.kemet.com/sample Engineering Kit Request http://www.kemet.com/kits Contact Resource Location Website www.kemet.com Contact Us http://www.kemet.com/contact Investor Relations http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required.

Product Information

T520A686M2R5A specifications and overview.

Summary

KEMET Organic Capacitor (KO-CAP) T520 Series Polymer Tantalum

Description

KEMET Organic Capacitor (KO-CAP) T520 Series Polymer Tantalum

Source title T520A686M2R5A Datasheet(PDF) - Kemet Corporation

Related Parts

More parts from the same family.

Browse manufacturer