T5130AP

T5130AP MORNSUN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

2014.03.23-B/1 Page 1 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Active high precision isolated transmitter RoHS

FEATURES

z Four-port isolation(signal input, signal output, power supply and Isolation power output) z High accuracy (0.1% F .S.) z High linearity (0.1% F .S.) z Isolation voltage(2.5KVDC/60S) z Extremely low temperature drift (35PPM/℃) z Industry standard(Operating Temperature Range: -25 ~ 71℃) z High reliability(MTBF>500,000 hours) The TxxxxAP series are a high integration and efficiency active isolation amplifier module, with positive and negative signal inpu t & positive signal output. These modules, with a high efficient isolated micro-po wer source built-in, can provide energy for inner signal processing circuit and an isolation power out for front-end circuit. The product greatly simplifies the design of the user in the applications of three-wire and four-wire, also it improves the using room ratio of PCB. Adopting el ectromagnetism isolation technology, it is available to keep higher accuracy and extremely lower temperature drift more than opticalcoupler isolation. These modules have four-port isolation (input, output, power supply and isolation power output). Selection Guide Part No. Power Supply input (VDC) Input Signal Output Signal Isolation Power Output (VDC) T5130AP 24V ±10V 4~20mA None T5530AP 24V ±10V 0~10V None T5533AP 24V ±10V 0~10V 24V T5650AP 12V ±10V 0~5V None T6130AP 24V ±5V 4~20mA None T6630AP 24V ±5V 0~5V None T6633AP 24V ±5V 0~5V 24V T6634AP 24V ±5V 0~5V 15V Notes: We could also offer customer design for special input and output as follow: Power supply:24/15/12VDC Input signal: 0～±5V/±10V Output signal: 0～5V/10V Isolation power output: 24/15/12/5VDC. Input Specifications Item Operating Conditions Value Input Power Supply Input voltage (Nominal Power Supply) ±5% Input power Signal, power full load ≤2W Power supply protection Reverse polarity protection Input Input signal See selection guide Input impedance ≥10MΩ Overload in case of input of voltage signal -15V<Vin<15V Output Specifications Item Operating Conditions Value Output of Isolated Power Supply Output voltage Power, current full load (Nominal value)±10% Output current ≤25mA Output Output signal See selection guide Load capacity Voltage output ≥2KΩ C u r r e n to u t p u t@2 0 m A ≤500Ω

2014.03.23-B/1 Page 2 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Transmission Specifications Item Operating Conditions Value Zero Offset 0.1%F .S. Precision 0.1%F .S. Temperature Drift Operating temperature range of -25 to +71℃ 0.0035%F .S./℃ General Specifications Item Operating Conditions Value Electric Isolation Four-port isolation (signal input, signal output, power supply and Power distribution) Degree of Isolation testing for 1 minute, leakage current <1mA, humidity <70% 2.5KVDC (Note: It is 500VDC between input and isolation power out when there is isolation power out) Insulation Resistance 100MΩ, 500VDC (Between signal input, signal output, power supply and isolation power output) Operating Temperature -25 ~ +71℃ Transportation and Storage Temperature -50 ~ +105℃ Application Environment The presence of dust, fierce vibration, impulsion and corrosive gas may cause damage to the product Physical Specifications Casing Material WH8100-F [1] Weight 10g, typ. Cooling method Free air cooling Application Precautions 1. Please read the instructions carefully before use; contact our technical support if you have any problem. 2. Do not use the product in hazardous areas. 3. Use DC power supply for the product and 220V AC power supply is prohibited. 4. Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment. After-sales service 1. Ex-factory inspection and quality control have been strictly conducted for the product; if there occurs abnormal operation or possibility of failure of internal module, please contact the local representative or our technical support. 2. The warranty period for the product is 3 years as calculated from the date of delivery. If any quality problem occurs under normal use within the warranty period, the product can be repaired or changed for free. Applied circuit See Application Notes for Isolated Transmitter for details. Design Reference 1. Typical application Sout+ Sout- Sin+ Sin- Pout+ Pout- NC NC Pin- Pin+ - + Signal output -+ + Signal input Distribution outputPower supply Voltage output NC 24 23 16 15 14 13 1 23 11 12 Sout+ Sout- Sin+ Sin- Pout+ Pout- NC NC Pin- Pin+ - + Signal output -+ + Signal input Distribution outputPower supply Current output NC 24 23 16 15 14 13 1 2 3 11 12 Fig. 1 2. For more information please find the application notes on www.mornsun-power.com

2014.03.23-B/1 Page 3 of 3 MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation Dimensions and Recommended Layout Note: 1. Packing Information please refer to 'Product Packing Information'. Packing bag number:58210008; 2. Unless otherwise specified, data in this datasheet should be tested under the conditions of Ta=25 ℃, humidity<75% when inputting nominal voltage and outputting rated load; 3. All index testing methods in this datasheet are based on our Company’s corporate standards; 4. The performance indexes of the product models listed in this manual are as above, but some indexes of non-standard model products will exceed the above-mentioned requirements, and please directly contact our technician for specific information; 5. We can provide product customization service; 6. Specifications of this product are subject to changes without prior notice. Mornsun Guangzhou Science & Technology Co., Ltd. Tel: 86-20-38601850-8801 Fax: 86-20-38601272 E-mail: info@mornsun.cn