T50R0-150-10E BARRY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
T50R0-150-10E Features: T50R0-150-10E Parameters: T50R0-150-10E Dimensions: Barry Industries ITAR Registered barryind.com 60 Walton St. Attleboro, MA 02703 • T (508) 226-3350 • F (508) 226-3317 • sales@barryind.com T50R0-150-10E Power Derating Curve Barry Industries reserves the right to change part number and/or process without notification. Operating Frequency: DC - 2.5GHz Rated Power: 150W* Return Loss (Typical): 20dB or Better (DC - 2GHz) 18dB or Better (>2GHz - 2.5GHz) Impedance: 50Ω ±5%* Resistor Construction: Thick Film on BeO Attached with AuGe Braze Flange Construction: Copper Tungsten Lead Construction: Copper Attached with AuGe Braze Operating Temperature: -55 to +150°C Ordering Information: Barry Industries maintains an ISO9001 Certified Quality Management System. ORIG. REV. No. Dimensions in inches [mm] Tolerance is ± 0.010 [0.254] unless otherwise stated PAGE 1 OF 2 B T 50R0 - 150 - 10E 150 - 150W Rated Power Assigned by Factory 50R0 - 50Ω Value CodePrefix for Flanged Termination MAY 17 2006 NOV 5 2014 * Rating based on ≤100°C constant flange temperature In a matched, continious 50Ω system with proper workmanship * Other values and tolerances available. Contact factory. 150W BeO Flanged Termination Meets MIL-STD-202 Method 109 Condition F3 Temperature Cycle T50R0-150-10E
- TCE Matched, All Brazed Construction
- RoHS Compliant
- Customer Defined Testing Available
- Enhanced Mechanical Strength
- Covered Resistor Element
- ±5% Resistor Tolerance 100 % of Rated Power Flange Temperature °C -55 -25 0 25 50 100 125 150 175 200 250 .140 [3.556] Max. .062 [1.575] .105 [2.667] From Bottom Face of Lead .230 [5.842] .115 [2.92] .040 [1.02] .005 [.127] Thick .125 [3.18] Min. .800 [20.32] .600 [15.224] .560 [14.224] .100 [2.54] Chamfer (4X) .350 [8.89] .130 [3.302] (2X)T50R0- 150-10E
T50R0-150-10E Reliability Data: Barry Industries ITAR Registered barryind.com 60 Walton St. Attleboro, MA 02703 • T (508) 226-3350 • F (508) 226-3317 • sales@barryind.com Barry Industries reserves the right to change part number and/or process without notification. Barry Industries maintains an ISO9001 Certified Quality Management System. Parameter: Test Condition: Results: Short Time Overload Apply 1.1x Rated Power for 5 Seconds. ≤ 2.0% Resistance Shift Rated Load Life Apply Full Power at 100°C ±2°C 90 Minutes on/ 30 Minutes off. Repeat for 1000 hours ≤ 2.0% Resistance Shift Moisture Resistance MIL-PRF-55342 para.4.8.9 95% RH, 25°C - 65°C ≤ 2.0% Resistance Shift Resistance to Soldering Heat (Lead) MIL-STD-202 Method 210 Test Condition “A” ≤ 2.0% Resistance Shift Resistance to Soldering Heat (Assembly) MIL-STD-202 Method 210 Test Condition “J” ≤ 2.0% Resistance Shift Terminal Strength MIL-STD-202 Method 211 Test Condition “A” 3lbs. Test Condition “B” 5 bends No Significant Abnormality (Visual) Solderability (Lead only) MIL-STD-202 Method 208 Test C >95% Covered High Temperature Storage 125°C ±2°C for 500 Hours 1.) ≤ 2.0% Resistance Shift 2.) No Significant Abnormality (Visual) Thermal Shock -65°C to +150°C Each Cycle 30 Minutes for
500 Hours
1.) ≤ 2.0% Resistance Shift 2.) No Significant Abnormality (Visual) ORIG. REV. No. PAGE 2 OF 2 For further detail on the advantages of using TCE Matched Copper-Tungsten flange mount devices from Barry Industries please refer to the Application Note ‘Finite Element Analysis of a High Power Resistor’. This document can be found on the Barry Industries website: www.barryind.com. 150W BeO Flanged Termination Meets MIL-STD-202 Method 109 Condition F3 Temperature Cycle T50R0-150-10E MAY 17 2006 NOV 5 2014 B