T496

T496 KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

/MT87 /MT75 /MT88 /MT67/MT65/MT84/MT72/MT79/MT68/MT69/MT32/MT40/MT45/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT83/MT73/MT68/MT69/MT32/MT86/MT73/MT69/MT87 /MT65/MT78/MT79/MT68/MT69/MT32/MT40/MT43/MT41/MT32/MT69/MT78/MT68 /MT86/MT73/MT69/MT87 /MT84 /MT71/MT83 /MT83 /MT66 /MT66 /MT72 /MT72 /MT66/MT79/MT84/MT84/MT79/MT77/MT32/MT86/MT73/MT69/MT87 /MT69 /MT70 /MT65 /MT76 /MT84/MT101/MT114/MT109/MT105/MT110/MT97/MT116/MT105/MT111/MT110 /MT99/MT117/MT116/MT111/MT117/MT116/MT32/MT97/MT116 /MT75/MT69/MT77/MT69/MT84/MT146/MT115 /MT79/MT112/MT116/MT105/MT111/MT110/MT44 /MT101/MT105/MT116/MT104/MT101/MT114/MT32/MT101/MT110/MT100 /MT82 /MT80 /MT84/MT101/MT115/MT116/MT32/MT84/MT97/MT98 /MT48/MT46/MT49/MT53/MT40/MT48/MT46/MT48/MT48/MT54/MT41/MT32/MT77/MT97/MT120/MT46 OUTLINE DRAWINGS Part Number Example: T496B105M025AS (14 digits no spa es) M105496 A 025TB S T antalum Series T496 - P recision Molded, Fail-safe Case Size B, C, D, X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Lead Material Failure Rate V oltage Capacitance T olerance A - Not Applicable M - ± 20% K - ± 10% H - Tin/Lead (SnPb - 5% Pb minimum) **S T - 100% Sn (Tin) Plated - Not recommended for new designs T496 Series – ORDERING INFORMATION Notes: 1. Metric dimensions govern. 2. (Ref) - Dimensions provided for reference only. KEMET EIA H X (Ref) P (Ref) R T (Ref) A (Min) G (Ref) E (Ref) CASE SIZE K ± 0.20 ±(Ref) (.004 (.004 ± B C D X 3528-21 6032-28 7343-31 7343-43 (.287 ± .012) (.169 ± (.1 ± .012) 2.2 (.087) 2.2 (.087) 2.4 (.094) 2.4 (.094) 0.8 (.031) 1.3 (.051) 1.3 (.051) 1.3 (.051) (.016) 0.5 (.020) 0.5 (.020) 0.5 (.020) 1.1 (.043) 1.4 (.055) 1.5 (.059) 2.3 (.091) (.067) 1.0 1.0 1.0 1.0 (.005) 2.1 (.083) (.150) 1.8 (.071) 2.8 (.1 3.5 (.138) 2.2 (.087) (.094) (.138) (.138) DIMENSIONS — Millimeters (Inches) Time (Seconds) .0001 .001 .01 .1 1 10 TYPICAL FUSE ACTUATION PROFILE Current (Amps) SOLID TANTALUM CHIP CAPACITORS T496 SERIES—Fail-Safe Fused ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630036

• Built-in fuse protects against damaging short circuit failure mode
• Precision-molded, laser-marked case
• Symmetrical, compliant terminations
• Taped and reeled per EIA 481-1
• Case geometry and footprints equivalent to Industrial Grade T491 Series. (Case sizes B, C, D and X only)
• 100% Surge Current test on C, D, X sizes
• Patented fuse assembly
• Operating Temperature: -55˚C to +125˚C
• Fuse actuation, 25/H11034C: within 1 second at fault currents of 4 amps and higher.
• Continuous current capability: 0.75 amps
• Post-actuation resistance, 25/H11034C: 10 megohms minimum
• Test tabs on the sides of the case bypass the capacitor element to allow direct testing of the fuse assembly.
• RoHS Compliant & Leadfree Terminations (See www.kemet.com for lead transition)

FEATURES

*Part number example: T496B105M025AT (14 digits - no spaces). See www.kemet.com for Pb Free transition. ** “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix termination codes do not quarantee Pb-free product. *Pb-free supply is not guaranteed with the ‘S’ termination code. This termination code not available effective 15 July 2007. “S” = Not Recommended

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 37 SOLID TANTALUM CHIP CAPACITORS T496 SERIES—Fail-Safe Fused Solid Tantalum Surface Mount T496 SERIES CONSTRUCTION Fuse Molded Case Silver Adhesive Washer Positive Termination* Weld Negative Termination* Mn02 Coat (First Layer) Silver Paint (Third Layer) Tantalum Wire Carbon (Second Layer) Tantalum (Ta2O5) Polarity Stripe (+) Polarity Bevel (+) *100% Tin CAPACITOR MARKINGS T496 Series — All Case Sizes T496 RATINGS & PART NUMBER REFERENCE Print Week Code: 1st Digit = Year 2nd & 3rd Digits = Week "542" = The 42nd week of 2005 Polarity Indicator (+) (Solid Stripe) KEMET I. D. Symbol Rated Voltage Fused Fail-Safe Device Picofarad Code 227 20 K 542 (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert lead material designation for Ordering Information on page 36. Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substi- tutions will be marked with the higher voltage rating.

10 Volt Rating at +85°C (7 Volt Rating at + 125°C)

10 Volt Rating at +85°C (7 Volt Rating at +125°C) cont. Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 68.0 C T496C686(1)004A(2) E1K 6 2.7 6.0 1.6 68.0 C T496C686(1)004A(2) E40 0 2.7 6.0 0.4 100.0 C T496C107(1)004A(2) E1K 2 4.0 8.0 1.2 150.0 D T496D157(1)004A(2) E80 0 6.0 8.0 0.8 150.0 C T496C157(1)004A(2) E1K 2 6.0 8.0 1.2 220.0 D T496D227(1)004A(2) E70 0 8.8 8.0 0.7 220.0 D T496D227(1)004A(2) E40 0 8.8 8.0 0.4 #330.0 D T496D337(1)004A(2) E70 0 13.2 8.0 0.7 #330.0 D T496D337(1)004A(2) E40 0 13.2 8.0 0.4 330.0 X T496X337(1)004A(2) E700 13.2 8.0 0.7 #470.0 X T496X477(1)004A(2) E500 18.8 8.0 0.5 4.7 B T496B475(1)006A(2) E3K 5 0.5 6.0 3.5 6.8 B T496B685(1)006A(2) E3K 5 0.5 6.0 3.5 10.0 B T496B106(1)006A(2) E3K 5 0.6 6.0 3.5 15.0 C T496C156(1)006A(2) E2K 0 0.9 6.0 2.0 22.0 B T496B226(1)006A(2) E3K 5 1.3 6.0 3.5 22.0 B T496B226(1)006A(2) E1K 5 1.3 6.0 1.5 22.0 C T496C226(1)006A(2) E2K 0 1.4 6.0 2.0 33.0 C T496C336(1)006A(2) E2K 0 2.0 6.0 2.0 33.0 C T496C336(1)006A(2) E60 0 2.0 6.0 0.6 47.0 C T496C476(1)006A(2) E1K 6 2.9 6.0 1.6 47.0 C T496C476(1)006A(2) E60 0 2.9 6.0 0.6 47.0 D T496D476(1)006A(2) E1K 0 2.9 6.0 1.0 #68.0 C T496C686(1)006A(2) E1K 2 4.1 6.0 1.2 68.0 D T496D686(1)006A(2) E1K 0 4.1 6.0 1.0 100.0 X T496X107(1)006A(2) E900 6.0 8.0 0.9 100.0 X T496X107(1)006A(2) E300 6.0 8.0 0.3 100.0 D T496D107(1)006A(2) E80 0 6.0 8.0 0.8 100.0 D T496D107(1)006A(2) E40 0 6.0 8.0 0.4 #100 C T496C107(1)006A(2) E40 0 6.0 8.0 0.4 150.0 X T496X157(1)006A(2) E300 9.0 8.0 0.3 150.0 D T496D157(1)006A(2) E70 0 9.0 8.0 0.7 150.0 D T496D157(1)006A(2) E30 0 9.0 8.0 0.3 220.0 X T496X227(1)006A(2) E700 13.2 8.0 0.7 220.0 X T496X227(1)006A(2) E300 13.2 8.0 0.3 #220.0 D T496D227(1)006A(2) E70 0 13.2 8.0 0.7 #220.0 D T496D227(1)006A(2) E30 0 13.2 8.0 0.3 #330.0 X T496X337(1)006A(2) E500 19.8 8.0 0.5 #330.0 X T496X337(1)006A(2) E300 19.8 8.0 0.3 3.3 B T496B335(1)010A(2) E3K 5 0.5 6.0 3.5 4.7 B T496B475(1)010A(2) E3K 5 0.5 6.0 3.5 6.8 B T496B685(1)010A(2) E3K 5 0.7 6.0 3.5 10.0 C T496C106(1)010A(2) E2K 0 1.0 6.0 2.0 15.0 B T496B156(1)010A(2) E3K 5 1.5 6.0 3.5 15.0 C T496C156(1)010A(2) E2K 0 1.5 6.0 2.0 15.0 C T496C156(1)010A(2) E60 0 1.5 6.0 0.6 22.0 C T496C226(1)010A(2) E2K 0 2.2 6.0 2.0 22.0 C T496C226(1)010A(2) E50 0 2.2 6.0 0.5 33.0 D T496D336(1)010A(2) E1K 0 3.3 6.0 1.0 33.0 D T496D336(1)010A(2) E40 0 3.3 6.0 0.4 33.0 C T496C336(1)010A(2) E1K 6 3.3 6.0 1.6 33.0 C T496C336(1)010A(2) E40 0 3.3 6.0 0.4 4 Volt Rating at +85°C (2.7 Volt Rating at +125°C) **6 Volt Rating at +85°C (4 Volt Rating at +125°C) tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 47.0 D T496D476(1)010A(2) E1K 0 4.7 6.0 1.0 47.0 D T496D476(1)010A(2) E40 0 4.7 6.0 0.4 #47.0 C T496C476(1)010A(2) E1K 2 4.7 6.0 1.2 #47.0 C T496C476(1)010A(2) E40 0 4.7 6.0 0.4 68.0 X T496X686(1)010A(2) E900 6.8 6.0 0.9 68.0 D T496D686(1)010A(2) E80 0 6.8 6.0 0.8 68.0 D T496D686(1)010A(2) E40 0 6.8 6.0 0.4 100.0 X T496X107(1)010A(2) E400 10.0 8.0 0.4 100.0 D T496D107(1)010A(2) E70 0 10.0 8.0 0.7 100.0 D T496D107(1)010A(2) E40 0 10.0 8.0 0.4 150.0 X T496X157(1)010A(2) E700 15.0 8.0 0.7 150.0 X T496X157(1)010A(2) E400 15.0 8.0 0.4 #150.0 D T496D157(1)010A(2) E70 0 15.0 8.0 0.7 #150.0 D T496D157(1)010A(2) E40 0 15.0 8.0 0.4 #220.0 X T496X227(1)010A(2) E500 22.0 8.0 0.5 #220.0 X T496X227(1)010A(2) E300 22.0 8.0 0.3 #220.0 D T496D227(1)010A(2) E30 0 22.0 8.0 0.3 2.2 B T496B225(1)016A(2) E3K 5 0.5 6.0 3.5 3.3 B T496B335(1)016A(2) E3K 5 0.5 6.0 3.5 3.3 B T496B335(1)016A(2) E2K1 0.5 6.0 2.1 4.7 B T496B475(1)016A(2) E3K 5 0.8 6.0 3.5 4.7 B T496B475(1)016A(2) E1K 6 0.8 6.0 1.6 6.8 C T496C685(1)016A(2) E2K 0 1.1 6.0 2.0 6.8 C T496C685(1)016A(2) E60 0 1.1 6.0 0.6 10.0 B T496B106(1)016A(2) E3K 5 1.6 6.0 3.5 10.0 C T496C106(1)016A(2) E2K 0 1.6 6.0 2.0 10.0 C T496C106(1)016A(2) E70 0 1.6 6.0 0.7 15.0 C T496C156(1)016A(2) E2K 0 2.4 6.0 2.0 15.0 C T496C156(1)016A(2) E60 0 2.4 6.0 0.6 22.0 D T496D226(1)016A(2) E1K 0 3.6 6.0 1.0 22.0 D T496D226(1)016A(2) E50 0 3.6 6.0 0.5 22.0 C T496C226(1)016A(2) E1K 6 3.6 6.0 1.6 22.0 C T496C226(1)016A(2) E1K 0 3.6 6.0 1.0 33.0 D T496D336(1)016A(2) E1K 0 5.3 6.0 1.0 33.0 D T496D336(1)016A(2) E40 0 5.3 6.0 0.4 47.0 X T496X476(1)016A(2) E900 7.5 6.0 0.9 47.0 X T496X476(1)016A(2) E400 7.5 6.0 0.4 47.0 D T496D476(1)016A(2) E80 0 7.5 6.0 0.8 47.0 D T496D476(1)016A(2) E40 0 7.5 6.0 0.4 100.0 X T496X107(1)016A(2) E700 16.0 8.0 0.7 10 Volt Rating at +85°C (7 Volt Rating at +125°C) cont.

16 Volt Rating at +85°C (10 Volt Rating at +125°C)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS T496 SERIES—Fail-Safe Fused Solid Tantalum Surface Mount T496 SERIES CONSTRUCTION T496 RATINGS & PART NUMBER REFERENCE (1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance. (2) To complete KEMET Part Number, insert lead material designation for Ordering Information on page 36. Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s option. Voltage substi- tutions will be marked with the higher voltage rating. Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 1.5 B T496B155(1)020A(2) E5K 0 0.5 6.0 5.0 2.2 B T496B225(1)020A(2) E3K 5 0.5 6.0 3.5 2.2 B T496B225(1)020A(2) E1K 6 0.5 6.0 1.6 3.3 B T496B335(1)020A(2) E3K 5 0.7 6.0 3.5 4.7 C T496C475(1)020A(2) E2K 0 1.0 6.0 2.0 6.8 C T496C685(1)020A(2) E2K 0 1.4 6.0 2.0 6.8 C T496C685(1)020A(2) E60 0 1.4 6.0 0.6 10.0 C T496C106(1)020A(2) E2K 0 2.0 6.0 2.0 10.0 C T496C106(1)020A(2) E80 0 2.0 6.0 0.8 15.0 D T496D156(1)020A(2) E1K 0 3.0 6.0 1.0 15.0 D T496D156(1)020A(2) E50 0 3.0 6.0 0.5 15.0 C T496C156(1)020A(2) E50 0 3.0 6.0 0.5 22.0 D T496D226(1)020A(2) E1K 0 4.4 6.0 1.0 22.0 D T496D226(1)020A(2) E50 0 4.4 6.0 0.5 33.0 X T496X336(1)020A(2) E900 6.6 6.0 0.9 33.0 X T496X336(1)020A(2) E400 6.6 6.0 0.4 33.0 D T496D336(1)020A(2) E400 6.6 6.0 0.4 47.0 X T496X476(1)020A(2) E300 9.4 6.0 0.3 47.0 D T496D476(1)020A(2) E30 0 9.4 6.0 0.3 0.68 B T496B684(1)025A(2) E6K 5 0.5 4.0 6.5 1.0 B T496B105(1)025A(2) E5K 0 0.5 4.0 5.0 1.0 B T496B105(1)025A(2) E3K 5 0.5 4.0 3.5 1.5 B T496B155(1)025A(2) E5K 0 0.5 6.0 5.0 1.5 B T496B155(1)025A(2) E1K 6 0.5 6.0 1.6 2.2 C T496C225(1)025A(2) E3K 5 0.6 6.0 3.5 3.3 C T496C335(1)025A(2) E2K 5 0.9 6.0 2.5 3.3 C T496C335(1)025A(2) E2K1 0.9 6.0 2.1

4.7 C T496C475(1)025A(2) E2K

5 1.2 6.0 2.5 4.7 C T496C475(1)025A(2) E1K 3 1.2 6.0 1.3 6.8 C T496C685(1)025A(2) E2K 0 1.7 6.0 2.0 6.8 C T496C685(1)025A(2) E60 0 1.7 6.0 0.6 10.0 C T496C106(1)025A(2) E60 0 2.5 6.0 0.6 10.0 D T496D106(1)025A(2) E1K 2 2.5 6.0 1.2 10.0 D T496D106(1)025A(2) E60 0 2.5 6.0 0.6 15.0 D T496D156(1)025A(2) E1K 0 3.8 6.0 1.0 15.0 D T496D156(1)025A(2) E50 0 3.8 6.0 0.5 22.0 X T496X226(1)025A(2) E900 5.5 6.0 0.9 22.0 X T496X226(1)025A(2) E400 5.5 6.0 0.4 22.0 D T496D226(1)025A(2) E80 0 5.5 6.0 0.8 22.0 D T496D226(1)025A(2) E40 0 5.5 6.0 0.4

25 Volt Rating at +85°C (17 Volt Rating at +125°C)

20 Volt Rating at +85°C (13 Volt Rating at +125°C)

tance µF Case Size KEMET Part Number DCL µA @ 25°C Max. DF% @ +25°C 120 Hz. Max. ESR Ω @ +25°C 100 kHz Max. 0.47 B T496B474(1)035A(2)E8K 0 0.5 4.0 8.0 0.47 B T496B474(1)035A(2)E2K 6 0.5 4.0 2.6 0.68 B T496B684(1)035A(2) E6K 5 0.5 4.0 6.5 1.0 B T496B105(1)035A(2) E5K 0 0.5 4.0 5.0 1.0 B T496B105(1)035A(2) E3K1 0.5 4.0 3.1 1.5 C T496C155(1)035A(2) E4K 5 0.5 6.0 4.5 1.5 C T496C155(1)035A(2) E2K 6 0.5 6.0 2.6 2.2 C T496C225(1)035A(2) E3K 5 0.8 6.0 3.5 2.2 C T496C225(1)035A(2) E1K 6 0.8 6.0 1.6 3.3 C T496C335(1)035A(2) E2K 5 1.2 6.0 2.5 3.3 C T496C335(1)035A(2) E90 0 1.2 6.0 0.9 4.7 D T496D475(1)035A(2) E1K 5 1.7 6.0 1.5 4.7 D T496D475(1)035A(2) E70 0 1.7 6.0 0.7 6.8 D T496D685(1)035A(2) E1K 3 2.4 6.0 1.3 6.8 D T496D685(1)035A(2) E75 0 2.4 6.0 0.75 10.0 X T496X106(1)035A(2) E1K0 3.5 6.0 1.0 10.0 X T496X106(1)035A(2) E500 3.5 6.0 0.5 10.0 D T496D106(1)035A(2) E40 0 3.5 6.0 0.5 15.0 X T496X156(1)035A(2) E900 5.3 6.0 0.9 15.0 X T496X156(1)035A(2) E500 5.3 6.0 0.5 15.0 D T496D156(1)035A(2) E50 0 5.3 6.0 0.5 22.0 X T496X226(1)035A(2) E300 7.7 6.0 0.3 0.15 B T496B154(1)050A(2) E16 K 0.5 4.0 16.0 0.22 B T496B224(1)050A(2) E14 K 0.5 4.0 14.0 0.22 B T496B224(1)050A(2) E10 K 0.5 4.0 10.0 0.33 B T496B334(1)050A(2) E10 K 0.5 4.0 10.0 0.33 B T496B334(1)050A(2) E2K 6 0.5 4.0 2.6 0.47 C T496C474(1)050A(2) E8K 0 0.5 4.0 8.0 0.47 C T496C474(1)050A(2) E1K 9 0.5 4.0 1.9 0.68 C T496C684(1)050A(2) E7K 0 0.5 4.0 7.0 0.68 C T496C684(1)050A(2) E1K 7 0.5 4.0 1.7 1.0 C T496C105(1)050A(2) E5K 5 0.5 4.0 5.5 1.0 C T496C105(1)050A(2) E2K 7 0.5 4.0 2.7 1.5 C T496C155(1)050A(2) E5K 0 0.8 6.0 5.0 1.5 C T496C155(1)050A(2) E2K 0 0.8 6.0 2.0 2.2 D T496D225(1)050A(2) E2K 5 1.1 6.0 2.5 2.2 D T496D225(1)050A(2) E90 0 1.1 6.0 0.9 3.3 D T496D335(1)050A(2) E2K 0 1.7 6.0 2.0 3.3 D T496D335(1)050A(2) E1K 0 1.7 6.0 1.0 4.7 X T496X475(1)050A(2) E1K5 2.4 6.0 1.5 4.7 X T496X475(1)050A(2) E400 2.4 6.0 0.4 4.7 D T496D475(1)050A(2) E40 0 2.4 6.0 0.4

35 Volt Rating at +85°C (23 Volt Rating at +125°C)

50 Volt Rating at +85°C (33 Volt Rating at +125°C)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only (+) (–) Embossed Carrier Embossment Top T ape Thickness .10mm (.004") Max Thickness 8mm ±.30 (.315 ±.012") or 12mm ±.30 (.472 ±.012") 178mm (7.00") or 330mm (13.00") 8mm (0.315") or or 330mm (13.0") QUANTITIES PACKAGED PER REEL Case Code Tape KEMET EIA Width-mm 7" Reel* 13" Reel* R 2012-12 8 2,500 10,000 S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 U 6032-15 12 1,000 5,000 W 7343-15 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E 7260-38 12 500 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Packaging * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165/H11034to 180/H11034from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A 0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not pro- trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) Table 1 — EMBOSSEDTAPEDIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size D 0 EP 0 P2 T Max T 1 Max and +0.10 -0.0 +0.004, -0.0) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B 1 Max. D 1 Min. F P 1 R Min. T 2 Max W A 0B0K0 Note 1 Note 2 Note 3 Note 4 (4 mm) TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information