T493A227J006AH6120

T493A227M006AB6110 KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

Notes: 1. Metric dimensions govern. 2. (ref) - Dimensions provided for reference only. (.051) 1.4 (.055) 1.3 (.004 ± .004) 2.1 0.9 (.083) (.122) 0.10 ± 0.10 3.1 3.5 3.5 DIMENSIONS- MILLIMETERS (INCHES) Component Marking /MT43 /MT40/MT43/MT41/MT32/MT75/MT69/MT77/MT69/MT84 /MT84/MT52/MT57/MT51/MT32/MT67/MT79/MT84/MT83 /MT51/MT51/MT54 /MT82/MT97/MT116/MT101/MT100 /MT86/MT111/MT108/MT116/MT97/MT103/MT101 /MT75/MT69/MT77/MT69/MT84/MT32/MT73/MT68 /MT80/MT105/MT99/MT111/MT102/MT97/MT114/MT97/MT100/MT32/MT67/MT111/MT100/MT101 /MT80/MT111/MT108/MT97/MT114/MT105/MT116/MT121 /MT73/MT110/MT100/MT105/MT99/MT97/MT116/MT111/MT114/MT32 /MT75/MT50/MT48 /MT51/MT49/MT53/MT80/MT114/MT105/MT110/MT116/MT32/MT87/MT101/MT101/MT107/MT32/MT67/MT111/MT100/MT101 /MT49/MT115/MT116/MT32/MT68/MT105/MT103/MT105/MT116/MT32/MT61/MT32/MT89/MT101/MT97/MT114 /MT50/MT110/MT100/MT32/MT38/MT32/MT51/MT114/MT100/MT32/MT68/MT105/MT103/MT105/MT116/MT32/MT43/MT32/MT87/MT101/MT101/MT107 /MT147/MT51/MT49/MT53/MT148/MT32/MT61/MT32/MT49/MT53/MT116/MT104/MT32/MT87/MT101/MT101/MT107/MT32/MT111/MT102/MT32/MT50/MT48/MT48/MT51 COMPONENT MARKING SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS 515 “515 = 15th week of 2005 KEMET EIA A 3216-18 3.2 ± 0.2 (.126 ± .008) 1.6 ± 0.2 (.063 ± .008) 1.6 ± 0.2 (.063 ± .008) 0.9 (.035) 1.2 (.047) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.4 (.016) 0.4 (.016) 1.4 (.055) 1.1 (.043) 1.3 (.051) B 3528-21 3.5 ± 0.2 (.138 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.9 ± 0.1 (.075 ± .008) 1.1 (.043) 2.2 (.087) 0.8 (.031) 0.4 (.016) 0.10 ± 0.10 (.004 ± .004) 0.5 (.020) 1.0 (.039) 2.1 (.083) 1.8 (.071) 2.2 (.087) C 6032-28 6.0 ± 0.3 (.236 ± .012) 3.2 ± 0.3 (.126 ± .12) 2.5 ± 0.3 .098 ± .012) 1.4 (.055) 2.2 (.087) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.0235) 1.0 (.039) 3.1 (.122) 2.8 (.110) 2.4 (.094) D 7343-31 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 2.8 ± 0.3 (.110 ± .012) 1.5 (.059) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.0235) 1.0 (.039) 3.8 (.150) 3.5 (.138) 3.5 (.138) X 7343-43 7.3 ± 0.3 (.287 ± .012) 4.3 ± 0.3 (.169 ± .012) 4.0 ± 0.3 (.157 ± .012) 2.3 (.091) 2.4 (.094) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 1.7 (.067) 1.0 (.039) 3.8 (.150) 3.5 (.138) 3.5 (.138) E 7260-38 7.3 ± 0.3 (.287 ± .012) 6.0 ± 0.3 (.236± .012) 3.6 ± 0.2 (.142 ± .008) 2.3 (.091) 4.1 (.161) 1.3 (.051) 0.5 (.020) 0.10 ± 0.10 (.004 ± .004) 0.9 (.035) 1.0 (.039) 3.8 (.150) 3.5 (.138) 3.5 (.138) Case Size LW H A (Min) G (Ref) E (Ref)K ±0.20 F ±0.1 S ±0.3 X (Ref) B ±0.15 (Ref) ±(.006) P (Ref) R (Ref)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300* 23

ORDERING INFORMATION

T493 RATINGS AND PART NUMBER REFERENCE (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 µ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS Solid Tantalum Surface Mount Capaci- tance μF Case Size KEMET Part Number DCL μA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC)

6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)

• Extended Values #Maximum Capacitance Change @ 125°C = +15% ESR/Surge Designator First 2 Numbers 61 = Surge - None 62 = Surge - 10 Cycles, +25°C 64 = Surge - 10 cycles, -55°C and +85°C Second 2 Numbers 10 = ESR - Standard 20 = ESR - Low 30 = ESR - Ultra-low Note: For order entry purposes the last 4-digits of the part number will be entered in the KEMET Customer Specification (C-Spec)Field. Termination Finish B - Gold plated C - Hot solder dipped H - Solder plated K - Solder fused T - 100% Tin Capacitance Tolerances M = ±10% K = ±10% J = ±5% (For 5% tolerance contact KEMET sales rep.) Reliability Level A = Non-ER; B = 0.1%/K hrs.; C = 0.01%/K hrs. Tantalum Series T493 Military Commercial Off-The-Shelf Case Size A, B, C, D, X Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. T 493 D 227 K 006 C H 6120 Voltage As shown Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630024 T493 RATINGS AND PART NUMBER REFERENCE SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) cont.

16 Volt Rating at +85ºC (10 Volt Rating at +125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 25 SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS T493 RATINGS AND PART NUMBER REFERENCE Solid Tantalum Surface Mount (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% † Maximum Capacitance Change @ 125°C = +20%

20 Volt Rating at +85ºC (13 Volt Rating at +125ºC)

25 Volt Rating at +85ºC (17 Volt Rating at +125ºC)

µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 16 Volt Rating at +85ºC (10 Volt Rating at +125ºC) cont.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-630026 SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS T493 RATINGS AND PART NUMBER REFERENCE (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% Capaci- tance µF Case Size KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max

35 Volt Rating at +85ºC (23 Volt Rating at +125ºC)

50 Volt Rating at +85ºC (33 Volt Rating at +125ºC)

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only (+) (–) Embossed Carrier Embossment Top T ape Thickness .10mm (.004") Max Thickness 8mm ±.30 (.315 ±.012") or 12mm ±.30 (.472 ±.012") 178mm (7.00") or 330mm (13.00") 8mm (0.315") or or 330mm (13.0") QUANTITIES PACKAGED PER REEL Case Code Tape KEMET EIA Width-mm 7" Reel* 13" Reel* R 2012-12 8 2,500 10,000 S 3216-12 8 2,500 10,000 T 3528-12 8 2,500 10,000 U 6032-15 12 1,000 5,000 W 7343-15 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E 7260-38 12 500 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Packaging * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610.

©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165/H11034to 180/H11034from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes:Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A 0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not pro- trude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) Table 1 — EMBOSSEDTAPEDIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size D 0 EP 0 P2 T Max T 1 Max and +0.10 -0.0 +0.004, -0.0) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B 1 Max. D 1 Min. F P 1 R Min. T 2 Max W A 0B0K0 Note 1 Note 2 Note 3 Note 4 (4 mm) TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information