T493

T493 KEMET | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 26

Technical content

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Built Into Tomorrow Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO2 (CWR11 Style) Overview The KEMET T493 Series is designed for the High Reliability Series (HRA) requirements of military and aerospace applications. This series is a surface mount product offering various lead-frame plating options, Weibull grading options, surge current testing, F-Tech (an improved anode manufacturing process) and Simulated Breakdown Voltage (SBDV) screening options to improve long term reliability. Standard, low, and ultra-low ESR options are available. All lots of this series are conditioned with MIL–PRF–55365 Group A testing. This series is also approved for DLA Drawing 07016 (please see part number list specific to this drawing). KEMET’s F-Tech eliminates hidden defects in the dielectric which continue to grow in the field, causing capacitor failures. Based on the fundamental understanding of degradation mechanisms in tantalum and niobium capacitors, F-Tech incorporates multiple process methodologies. Some minimize the oxygen and carbon content in the anodes which become contaminants and can lead to the crystallization of the anodic oxide dielectric. This process methodology reduces the contaminants, improving quality of the dielectric. An additional technology provides a stronger mechanical connection point between the tantalum lead wire and tantalum anode, enhancing robustness and product reliability. The benefit of F-Tech is illustrated by a 2,000 hour, 85°C, 1.32 X rated voltage accelerated life test. F-Tech parts see no degradation while standard tantalum's have 1.5 orders of magnitude degradation in leakage current. The KEMET patented Simulated Breakdown Screening (SBDS) is a nondestructive testing technique that simulates the breakdown voltage (BDV) of a capacitor without damage to its dielectric or to the general population of capacitors. This screening identifies hidden defects in the dielectric, providing the highest level of dielectric testing. SBDS is based on the simulation of breakdown voltage (BDV), the ultimate test of the dielectric in a capacitor. Low BDV indicates defects in the dielectric, and therefore, a higher probability of failure in the field. High BDV indicates a stronger dielectric and high-reliability performance in the field. This new screening method allows KEMET to identify the breakdown voltage of each individual capacitor and provide only the strongest capacitors from each lot. SBDS is currently available on select part types in the T493 and T497 Series. Please contact KEMET for details on ordering other part types with these capabilities. KEMET offers these technologies per the following options:

• F-Tech only
• SBDS only
• Combination of both F-Tech and SBDS for the ultimate protection

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Benefits

• F-Tech and Simulated Breakdown Voltage (SBDS) s creening options available
• Ta ped and reeled per EIA 481
• Sy mmetrical, compliant terminations
• Las er-marked case
• 10 0% surge current test available on all case sizes
• Te rmination options B, C, H, K, T, N, and M
• We ibull failure options B and C
• Al l parts tested per Group A of MIL –PRF–55365
• Ap proved for DLA Drawing 07016 applications* * Defense Logistics Agency (DLA), previously identified as DSCC

Applications

Typical applications include decoupling and filtering in military and aerospace applications. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels.

Ordering Information

T 493 D 227 K 006 C H 61 20 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish Surge ESR Packaging (C-Spec) T = Tantalum Military HRA X First two digits represent significant figures. Third digit specifies number of zeros. J = ±5% K = ±10% M = ±20% 004 = 4 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 063 = 63 A = N/A B = 0.1% /1,000 hours C = 0.01% /1,000 hours C = Hot solder dipped H = Standard solder coated (SnPb 5% Pb minimum) B = Gold plated K = Solder fused T = 100% Tin N = Non-magnetic 100% Tin (Sn) M = Non-magnetic (SnPb) 61 = None 62 = 10 Cycles after Weibull, 25°C 63 = 10 cycles after Weibull, −55°C and 85°C after Weibull 64 = 10 cycles before Weibull,−55° and +85°C 10 = ESR – Standard 20 = ESR – Low 30 = ESR – Ultra low Blank = 7" Reel 7280 = 13" Reel 7610 = Bulk Bag 7640 = Bluk plastic box WAFL = Waffle Pack For detailed part number offerings, please refer to: Table 1A – KEMET HRA Table 1B – DLA Drawing 07016

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Ordering Information – DLA Drawing 07016 07016- 001 K B H A Drawing Number Dash Number Capacitance Tolerance Reliability Grade Termination Finish Surge See Part Number Table J = ±5% K = ±10% M = ±20% B = 0.1%/1,000 hours C = 0.01%/1,000 hours C = Hot solder dipped H = Standard solder coated (SnPb 5% Pb minimum) B = Gold plated A = + 25ºC after Weibull B = −55ºC and +85ºC after Weibull C = −55ºC and + 85ºC before Weibull Z or no option= No test required For detailed part number offerings, please refer to: Table 1A –KEMET HRA Table 1B – DLA Drawing 07016 Ordering Information – F-Tech & Simulated Breakdown Screening (SBDS) T 493 D 226 K 020 C H 61 20 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish Surge Screening/ESR Packaging (C-Spec) T = Tantalum Military HRA X First two digits represent significant figures. Third digit specifies number of zeros. J = ±5% K = ±10% M = ±20% 025 = 25 035 = 35 050 = 50 063 = 63 A = N/A B = 0.1% /1,000 hours C = 0.01% /1,000 hours C = Hot solder dipped H = Standard solder coated (SnPb 5% Pb minimum) B = Gold plated K = Solder fused K = Solder fused T = 100% Tin N = Non-magnetic 100% Tin (Sn) M = Non-magnetic (SnPb) 61 = None 62 = 10 Cycles after Weibull, 25ºC 63 = 10 cycles after Weibull, −55ºC and 85ºC after Weibull 64 = 10 cycles before Weibull, −55° and +85°C 11 = F-Tech + SBDS * 12 = SBDS 13 = F-Tech * 21 = Low ESR + 11 22= Low ESR + 12 23 = Low ESR + 13 31= Ultra Low ESR + 11 32 = Ultra Low ESR + 12 33 = Ultra Low ESR + 13 Blank = 7" Reel 7280 = 13" Reel 7610 = Bulk Bag 7640 = Bluk plastic box WAFL = Waffle Pack * F-Tech screening option not available on A and B case size part types. F-Tech is available in select "C", "D", and "X" case sizes in 20 V and higher rated voltage Performance Characteristics Item Performance Characteristics Operating Temperature −55° C to 125° C Rated Capacitance Range 0.1 – 470 μF at 120 Hz/25°C Capacitance Tolerance J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) Rated Voltage Range 4 – 63 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Qualification Test Condition Characteristics Endurance 85°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours Δ C/C Within ±10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Storage Life 125°C at 0 volts, 2,000 hours Δ C/C Within ±10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Thermal Shock MIL –STD–202, Method 107, Condition B, mounted, −55°C to 125°C, 1,000 cycles Δ C/C Within ±5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Temperature Stability Extreme temperature exposure at a succession of continuous steps at +25°C, DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles (125°C, 1.2 x rated voltage) Δ C/C Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Mechanical Shock/ Vibration MIL –STD–202, Method 213, Condition I, 100 G peak MIL –STD–202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial limit Certification MIL–PRF–55365/8 DLA Drawing 07016

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) 0.1 100 100 1,000 10,000 100,000 1,000,000 10,000,00 0 Capacitance (µF) Frequency (Hz) T493B106/020 T493E476/035 T493X226/035

Electrical Characteristics

ESR vs. Frequency Capacitance vs. Frequency 0.01 0.1 100 1,000 100 1,000 10,000 100,000 1,000,000 10,000,000 Impedance, ESR (Ohms) Frequency (Hz) T493B106/020_IMP T493E476/035_IMP T493X226/035_IMP T493B106/020_ESR T493E476/035_ESR T493X226/035_ESR

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Dimensions – Millimeters (Inches) Metric will govern H X T B B G F E A L R P SIDE VIEW ANODE (+) END VIEW BOTTOM VIEWCATHODE (-) END VIEW W S S Termination cutout at KEMET's option, either end Case Size Component Typical Weight KEMET EIA L W H F ±0.1 ±(.004) S ±0.3 ±(.012) B ±0.15 (Ref) ±.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) (mg) A 3216–18 3.2±0.2 (0.126±0.008) 1.6±0.2 (0.063±0.008) 1.6±0.2 (0.063±0.008) 1.2 (0.047) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 (0.004±0.004) 0.4 (0.016) 0.4 (0.016) 0.13 (0.005) 1.2 (0.047) 1.1 (0.043) 1.3 (0.051) 58.97 B 3528–21 3.5±0.2 (0.138±0.008) 2.8±0.2 (0.110±0.008) 1.9±0.2 (0.075±0.008) 2.2 (0.087) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 (0.004±0.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) 102.3 C 6032–28 6.0±0.3 (0.236±0.012) 3.2±0.3 (0.126±0.012) 2.5±0.3 (0.098±0.012) 2.2 (0.087) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.1 (0.122) 2.8 (0.110) 2.4 (0.094) 224.2 D 7343–31 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 2.8±0.3 (0.110±0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 412.33 X 7343–43 7.3±0.3 (0.287±0.012) 4.3±0.3 (0.169±0.012) 4.0±0.3 (0.157±0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 652.04 E 7360–38 7.3±0.3 (0.287±0.012) 6.0±0.3 (0.236±0.012) 3.6±0.2 (0.142±0.008) 3.1 (0.120) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) 803.76 Notes: (Ref) – Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P or R because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Dimensions – Millimeters (Inches) DLA Drawing 07016 W ½ H2 Min. P L SIDE VIEW BOTTOM VIEWEND VIEW P W2 H Solderable Surfaces Termination cutout at KEMET's option, either end Case Size Component Typical Weight KEMET H L P ±0.3 (0.012) W W2 ±0.1 (0.004) (mg) A 1.6±0.2 (0.063±0.008) 3.2±0.2 (0.126±0.008) 0.8 (0.031) 1.6±0.2 (0.063±0.008) 1.2 (0.047) 58.97 B 1.9±0.2 (0.075±0.008) 3.5±0.2 (0.138±0.008) 0.8 (0.031) 2.8±0.2 (0.110±0.008) 2.2 (0.087) 102.3 C 2.5±0.3 (0.098±0.012) 6.0±0.3 (0.236±0.012) 1.3 (0.051) 3.2±0.3 (0.126±0.012) 2.2 (0.087) 224.2 D 2.8±0.3 (0.110±0.012) 7.3±0.3 (0.287±0.012) 1.3 (0.051) 4.3±0.3 (0.169±0.012) 2.4 (0.094) 412.33 X 4.0±0.3 (0.157±0.012) 7.3±0.3 (0.287±0.012) 1.3 (0.051) 4.3±0.3 (0.169±0.012) 2.4 (0.094) 652.04 E 3.6±0.2 (0.142±0.008) 7.3±0.3 (0.287±0.012) 1.3 (0.051) 6.0±0.3 (0.236±0.012) 3.1 (0.120)* 803.76 * Previously, KEMET’S “W 2” dimension was 4.10 (0.161) for the “E” case. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Table 1A – Ratings & Part Number Reference (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles − 55°C +85°C after Weibull 64 = 10 cycles − 55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/

5 Minutes

% at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 4 10 A/3216-18 T493A106(1)004(2)(3)(4)(5) 0.5 6.0 6.0 2.0 N/A 112 194 N/A 125 1 4 10 B/3528-21 T493B106(1)004(2)(3)(4)(5) 0.5 6.0 3.5 1.2 N/A 156 250 N/A 125 1 4 15 A/3216-18 T493A156(1)004(2)(3)(4)(5) 0.6 6.0 4.0 1.5 N/A 137 223 N/A 125 1 4 15 B/3528-21 T493B156(1)004(2)(3)(4)(5) 0.6 6.0 3.5 1.2 N/A 156 250 N/A 125 1 4 22 A/3216-18 T493A226(1)004(2)(3)(4)(5) 0.9 6.0 4.0 1.5 N/A 137 223 N/A 125 1 4 22 B/3528-21 T493B226(1)004(2)(3)(4)(5) 0.9 6.0 3.5 0.6 N/A 156 354 N/A 125 1 4 22 C/6032-28 T493C226(1)004(2)(3)(4)(5) 0.9 6.0 1.8 0.5 N/A 247 469 N/A 125 1 4 33 A/3216-18 T493A336(1)004(2)(3)(4)(5) 1.3 6.0 4.0 3.0 N/A 137 158 N/A 125 1 4 33 B/3528-21 T493B336(1)004(2)(3)(4)(5) 1.3 6.0 3.5 0.5 N/A 156 387 N/A 125 1 4 33 C/6032-28 T493C336(1)004(2)(3)(4)(5) 1.3 6.0 1.8 0.5 N/A 247 469 N/A 125 1 4 47 B/3528-21 T493B476(1)004(2)(3)(4)(5) 1.9 6.0 3.0 0.5 N/A 158 387 N/A 125 1 4 47 C/6032-28 T493C476(1)004(2)(3)(4)(5) 1.9 6.0 1.8 0.5 N/A 247 469 N/A 125 1 4 68 B/3528-21 T493B686(1)004(2)(3)(4)(5) 2.7 6.0 3.5 2.0 N/A 156 194 N/A 125 1 4 68 C/6032-28 T493C686(1)004(2)(3)(4)(5) 2.7 6.0 1.6 0.25 N/A 262 663 N/A 125 1 4 68 D/7343-31 T493D686(1)004(2)(3)(4)(5) 2.7 6.0 0.8 0.2 N/A 433 866 N/A 125 1 4 100 A/3216-18 T493A107(1)004(2)(3)(4)(5) 4 30.0 1.4 N/A N/A 231 N/A N/A 125 1 4 100 B/3528-21 T493B107(1)004(2)(3)(4)(5) 4 8.0 1.0 0.7 0.50 274 327 387 125 1 4 100 C/6032-28 T493C107(1)004(2)(3)(4)(5) 4 8.0 1.2 0.2 N/A 303 742 N/A 125 1 4 100 D/7343-31 T493D107(1)004(2)(3)(4)(5) 4 8.0 0.8 0.2 N/A 433 866 N/A 125 1 4 150 C/6032-28 T493C157(1)004(2)(3)(4)(5) 6 8.0 1.2 0.3 0.25 303 606 663 125 1 4 150 D/7343-31 T493D157(1)004(2)(3)(4)(5) 6 8.0 0.8 0.15 N/A 433 1000 N/A 125 1 4 220 D/7343-31 T493D227(1)004(2)(3)(4)(5) 8.8 8.0 0.9 0.7 N/A 408 463 N/A 125 1 4 330 D/7343-31 T493D337(1)004(2)(3)(4)(5) 13.2 8.0 0.7 0.15 N/A 463 1000 N/A 125 1 4 330 X/7343-43 T493X337(1)004(2)(3)(4)(5) 13.2 8.0 0.5 0.2 N/ A 574 908 N/A 125 1 VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles − 55°C +85°C after Weibull 64 = 10 cycles − 55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 10 1 A/3216-18 T493A105(1)010(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 87 112 N/A 125 1 10 10 A/3216-18 T493A106(1)010(2)(3)(4)(5) 1 6.0 4.0 1.8 N/A 137 204 N/A 125 1 10 10 B/3528-21 T493B106(1)010(2)(3)(4)(5) 1 6.0 3.5 0.8 0.75 15 6 306 316 125 1 10 10 C/6032-28 T493C106(1)010(2)(3)(4)(5) 1 6.0 1.8 0.6 N/A 247 428 N/A 125 1 10 15 B/3528-21 T493B156(1)010(2)(3)(4)(5) 1.5 6.0 3.5 0.7 N/A 156 327 N/A 125 1 10 22 B/3528-21 T493B226(1)010(2)(3)(4)(5) 2.2 6.0 3.0 0.7 N/A 158 327 N/A 125 1 10 33 B/3528-21 T493B336(1)010(2)(3)(4)(5) 3.3 6.0 3.5 2.0 N/A 156 194 N/A 125 1 10 33 C/6032-28 T493C336(1)010(2)(3)(4)(5) 3.3 6.0 1.6 0.3 N/A 262 606 N/A 125 1 10 33 D/7343-31 T493D336(1)010(2)(3)(4)(5) 3.3 6.0 0.8 0.3 N/A 433 707 N/A 125 1 10 47 C/6032-28 T493C476(1)010(2)(3)(4)(5) 4.7 6.0 1.2 0.3 N/A 303 606 N/A 125 1 10 68 X/7343-43 T493X686(1)010(2)(3)(4)(5) 6.8 4.0 0.5 0.15 N/A 574 1049 N/A 125 1 10 100 C/6032-28 T493C107(1)010(2)(3)(4)(5) 10 8.0 1.2 0.3 N/A 303 606 N/A 125 1 10 100 D/7343-31 T493D107(1)010(2)(3)(4)(5) 10 8.0 0.7 0.1 0.08 463 1225 1369 125 1 VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 10 150 D/7343-31 T493D157(1)010(2)(3)(4)(5) 15 8.0 0.7 0.1 0.08 463 1225 1369 125 1 10 150 X/7343-43 T493X157(1)010(2)(3)(4)(5) 15 8.0 0.7 0.2 0.09 485 908 1354 125 1 10 220 D/7343-31 T493D227(1)010(2)(3)(4)(5) 22 8.0 0.5 0.2 0.08 548 866 1369 125 1 10 220 X/7343-43 T493X227(1)010(2)(3)(4)(5) 22 8.0 0.5 0.1 0.05 574 1285 1817 125 1 10 330 X/7343-43 T493X337(1)010(2)(3)(4)(5) 33 10.0 0.5 0.1 0.05 574 1285 1817 125 1 10 470 X/7343-43 T493X477(1)010(2)(3)(4)(5) 47 10.0 0.2 0.05 N/A 908 1817 N/A 125 1 16 1 A/3216-18 T493A105(1)016(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 87 112 N/A 125 1 16 10 A/3216-18 T493A106(1)016(2)(3)(4)(5) 1.6 6.0 3.0 N/A N/A 158 N/A N/A 125 1 16 10 B/3528-21 T493B106(1)016(2)(3)(4)(5) 1.6 6.0 3.5 0.8 N/A 156 306 N/A 125 1 16 10 C/6032-28 T493C106(1)016(2)(3)(4)(5) 1.6 6.0 1.8 0.6 N/A 247 428 N/A 125 1 16 15 B/3528-21 T493B156(1)016(2)(3)(4)(5) 2.4 6.0 3.0 0.8 N/A 158 306 N/A 125 1 16 15 C/6032-28 T493C156(1)016(2)(3)(4)(5) 2.4 6.0 1.8 0.4 N/A 247 524 N/A 125 1 16 22 C/6032-28 T493C226(1)016(2)(3)(4)(5) 3.5 6.0 1.6 0.4 N/A 262 524 N/A 125 1 16 22 D/7343-31 T493D226(1)016(2)(3)(4)(5) 3.5 6.0 0.8 0.3 N/A 433 775 N/A 125 1 16 100 D/7343-31 T493D107(1)016(2)(3)(4)(5) 16 8.0 0.7 0.125 0.10 463 1095 1225 125 1 16 100 X/7343-43 T493X107(1)016(2)(3)(4)(5) 16 8.0 0.7 0.1 0.08 485 1285 1436 125 1 16 150 D/7343-31 T493D157(1)016(2)(3)(4)(5) 24 8.0 0.7 0.4 0.15 463 612 1000 125 1 16 150 X/7343-43 T493X157(1)016(2)(3)(4)(5) 24 8.0 0.5 0.2 0.10 574 908 1285 125 1 20 1 A/3216-18 T493A105(1)020(2)(3)(4)(5) 0.5 4.0 10.0 5.5 N/A 87 117 N/A 125 1 VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL Table 1A – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles − 55°C +85°C after Weibull 64 = 10 cycles − 55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail.

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 20 10 B/3528-21 T493B106(1)020(2)(3)(4)(5) 2 6.0 3.0 1.0 N/A 158 274 N/A 125 1 20 10 C/6032-28 T493C106(1)020(2)(3)(4)(5) 2 6.0 1.8 0.5 0.48 247 469 479 125 1 20 15 C/6032-28 T493C156(1)020(2)(3)(4)(5) 3 6.0 1.7 0.4 0.38 254 524 538 125 1 20 15 D/7343-31 T493D156(1)020(2)(3)(4)(5) 3 6.0 1.0 0.35 0.28 332 655 732 125 1 20 22 C/6032-28 T493C226(1)020(2)(3)(4)(5) 4.4 6.0 1.2 0.4 N/A 303 524 N/A 125 1 25 1 A/3216-18 T493A105(1)025(2)(3)(4)(5) 0.5 4.0 8.0 4.0 N/A 97 137 N/A 125 1 25 1 B/3528-21 T493B105(1)025(2)(3)(4)(5) 0.5 4.0 5.0 2.0 N/A 122 194 N/A 125 1 25 2.2 A/3216-18 T493A225(1)025(2)(3)(4)(5) 0.6 6.0 7.0 N/A N/A 103 N/A N/A 125 1 25 4.7 A/3216-18 T493A475(1)025(2)(3)(4)(5) 1.2 6.0 3.1 N/A N/ A 155 N/A N/A 125 1 25 10 D/7343-31 T493D106(1)025(2)(3)(4)(5) 2.5 6.0 1.0 0.4 N/A 332 612 N/A 125 1 25 15 C/6032-28 T493C156(1)025(2)(3)(4)(5) 3.8 6.0 1.5 0.9 N/A 270 350 N/A 125 1 25 15 X/7343-43 T493X156(1)025(2)(3)(4)(5) 3.8 6.0 0.7 0.2 N/A 485 908 N/A 125 1 25 22 C/6032-28 T493C226(1)025(2)(3)(4)(5) 5.5 6.0 0.4 .275 N/A 524 632 N/A 125 1 25 22 D/7343-31 T493D226(1)025(2)(3)(4)(5) 5.5 6.0 0.8 0.2 N/A 433 866 N/A 125 1 25 22 X/7343-43 T493X226(1)025(2)(3)(4)(5) 5.5 4.0 0.7 0.23 N/A 485 847 N/A 125 1 VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL Table 1A – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles − 55°C +85°C after Weibull 64 = 10 cycles − 55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail.

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles − 55°C +85°C after Weibull 64 = 10 cycles − 55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 25 68 X/7343-43 T493X686(1)025(2)(3)(4)(5) 17 8.0 0.3 N/A N/A 742 N/A N/A 125 1 25 68 E/7360-38 T493E686(1)025(2)(3)(4)(5) 17 8.0 0.1 N/A N/A 1414 N/A N/A 125 1 35 1 A/3216-18 T493A105(1)035(2)(3)(4)(5) 0.5 4.0 10.0 6.0 N/A 87 112 N/A 125 1 35 1.5 A/3216-18 T493A155(1)035(2)(3)(4)(5) 0.5 6.0 7.5 N/A N/A 100 N/A N/A 125 1 35 4.7 B/3528-21 T493B475(1)035(2)(3)(4)(5) 1.6 6.0 1.5 N/A N/A 224 N/A N/A 125 1 35 10 C/6032-28 T493C106(1)035(2)(3)(4)(5) 3.5 6.0 2.0 1.2 N/A 234 303 N/A 125 1 35 15 C/6032-28 T493C156(1)035(2)(3)(4)(5) 5.3 6.0 0.45 N/A N/ A 494 N/A N/A 125 1 35 33 D/7343-31 T493D336M035(2)(3)(4)(5) 11.6 6.0 0.3 N/A N/A 707 N/A N/A 125 1 35 47 X/7343-43 T493X476(1)035(2)(3)(4)(5) 16.5 6.0 0.25 N/A N/A 812 N/A N/A 125 1 35 47 E/7360-38 T493E476(1)035(2)(3)(4)(5) 16.5 10.0 0.5 0.3 N/A 632 816 N/A 125 1 50 0.22 A/3216-18 T493A224(1)050(2)(3)(4)(5) 0.5 4.0 18.0 N/A N/A 65 N/A N/A 125 1 VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Table 1A – Ratings & Part Number Reference cont. (1) To complete KEMET part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours) or A = N/A. Designates Reliability Level. (3) To complete KEMET part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder Plated, K = Solder Fused or T = 100% Tin (Sn). Designates Termination Finish. (4) To complete KEMET part number, insert 61 = None, 62 = 10 cycles +25°C, 63 = 10 cycles − 55°C +85°C after Weibull 64 = 10 cycles − 55°C +85°C before Weibull or 6(X)11, 6(X)12, 6(X)13, 6(X)21, 6(X)22, 6(X)23, 6(X)31, 6(X)32, 6(X)33. Designates screening options. (5) To complete KEMET part number, insert 10 = Standard ESR, 20 = Low ESR or 30 = Ultra Low ESR. Designates ESR option. Refer to Ordering Information for additional detail. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 50 0.68 A/3216-18 T493A684(1)050(2)(3)(4)(5) 0.5 4.0 7.9 N/A N/A 97 N/A N/A 125 1 50 1 B/3528-21 T493B105(1)050(2)(3)(4)(5) 0.5 4.0 7.0 N/A N/A 103 N/A N/A 125 1 50 10 X/7343-43 T493X106(1)050(2)(3)(4)(5) 5 6.0 0.7 0.4 N/A 485 642 N/A 125 1 50 15 X/7343-43 T493X156(1)050(2)(3)(4)(5) 7.5 6.0 1.0 N/A N/A 406 N/A N/A 125 1 VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +25ºC Maximum/ % at +25ºC 120 Hz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum Ω at 25ºC 100 kHz Maximum mA at +25°C 100 kHz mA at +25°C 100 kHz mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF Standard ESR Low ESR Ultra-low ESR Ripple Current STD ESR (rms) Ripple Current Low ESR (rms) Ripple Current Ultra-low ESR (rms) Maximum Operating Temp MSL

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Table 1B – DLA Drawing 07016, Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Ripple Current STD ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See page 2 for Ordering Information) (See page 2 for Ordering Information) µA at +25ºC Max/5 Min % at +25ºC

120 Hz Max

Ω at+25ºC 100 kHz Max mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 6.3 470 X/7343-43 T493X477M006(2)(3)(4)10 07016-023M(2)(3)(4) 29.6 10.0 0.20 908 125 1 6.3 470 X/7343-43 T493X477M006(2)(3)(4)20 07016-024M(2)(3)(4) 29.6 10.0 0.05 1817 125 1 10 68 D/ 7343-31 T493D686(1)010(2)(3)(4)30 07016-044(1)(2)(3)(4) 6.8 6.0 0.15 1000 125 1 10 220 D/7343-31 T493D227(1)010(2)(3)(4)30 07016-049(1)(2)(3)(4) 22.0 8.0 0.15 1000 125 1 10 220 X/7343-43 T493X227(1)010(2)(3)(4)30 07016-051(1)(2)(3)(4) 22.0 8.0 0.05 1817 125 1 10 330 X/7343-43 T493X337(1)010(2)(3)(4)20 07016-054(1)(2)(3)(4) 33.0 8.0 0.1 1285 125 1 10 330 X/7343-43 T493X337(1)010(2)(3)(4)30 07016-055(1)(2)(3)(4) 33.0 8.0 0.05 1817 125 1 10 470 X/7343-43 T493X477M010(2)(3)(4)10 07016-057M(2)(3)(4) 47.0 10.0 0.2 908 125 1 10 470 X/7343-43 T493X477M010(2)(3)(4)20 07016-058M(2)(3)(4) 47.0 10.0 0.05 1817 125 1 VDC at 85ºC µF KEMET/EIA (See page 2 for Ordering Information) (See page 2 for Ordering Information) µA at +25ºC Max/5 Min % at +25ºC Ω at+25ºC 100 kHz Max mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Ripple Current STD ESR (rms) Maximum Operating Temp MSL (1) To complete KEMET/DLA part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/DLA part number, insert B (0.1%/1,000 Hours) or C (0.01%/1,000 Hours). Designates Reliability Level. (3) To complete KEMET/DLA part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated. Designates Termination Finish. (4) To complete KEMET/DLA part number, insert A = + 25ºC after Weibull, B = −55ºC and +85ºC after Weibull, C = −55ºC and + 85ºC before Weibull or Z or no option= No test required. Designates surge testing option.

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Table 1B – DLA Drawing 07016, Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Ripple Current STD ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See page 2 for Ordering Information) (See page 2 for Ordering Information) µA at +25ºC Max/5 Min % at +25ºC Ω at+25ºC 100 kHz Max mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 16 68 D/7343-31 T493D686(1)016(2)(3)(4)30 07016-079(1)(2)(3)(4) 10.9 6.0 0.15 1000 125 1 16 100 D/7343-31 T493D107(1)016(2)(3)(4)20 07016-080(1)(2)(3)(4) 16.0 6.0 0.125 1095 125 1 16 150 D/7343-31 T493D157M016(2)(3)(4)20 07016-082M(1)(2)(3)(4) 24.0 6.0 0.15 1000 125 1 16 150 D/7343-31 T493D157M016(2)(3)(4)30 07016-083M(1)(2)(3)(4) 24.0 6.0 0.06 1581 125 1 16 150 E/7360-38 T493E157(1)016(2)(3)(4)10 07016-084(1)(2)(3)(4) 24.0 6.0 0.05 2000 125 1 16 220 E/7360-38 T493E227(1)016(2)(3)(4)10 07016-085(1)(2)(3)(4) 35.2 8.0 0.05 2000 125 1 VDC at 85ºC µF KEMET/EIA (See page 2 for Ordering Information) (See page 2 for Ordering Information) µA at +25ºC Max/5 Min % at +25ºC Ω at+25ºC 100 kHz Max mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Ripple Current STD ESR (rms) Maximum Operating Temp MSL (1) To complete KEMET/DLA part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/DLA part number, insert B (0.1%/1,000 Hours) or C (0.01%/1,000 Hours). Designates Reliability Level. (3) To complete KEMET/DLA part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated. Designates Termination Finish. (4) To complete KEMET/DLA part number, insert A = + 25ºC after Weibull, B = −55ºC and +85ºC after Weibull, C = −55ºC and + 85ºC before Weibull or Z or no option= No test required. Designates surge testing option.

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Table 1B – DLA Drawing 07016, Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Ripple Current STD ESR (rms) Maximum Operating Temp MSL VDC at 85ºC µF KEMET/EIA (See page 2 for Ordering Information) (See page 2 for Ordering Information) µA at +25ºC Max/5 Min % at +25ºC Ω at+25ºC 100 kHz Max mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC 25 47 D/7343-31 T493D476(1)025(2)(3)(4)20 07016-130M(1)(2)(3)(4) 11.8 6.0 0.25 775 125 1 25 47 D/7343-31 T493D476(1)025(2)(3)(4)30 07016-131M(1)(2)(3)(4) 11.8 6.0 0.175 926 125 1 35 33 D/7343-31 T493D336M035(2)(3)(4)10 07016-152M(2)(3)(4) 11.6 6.0 0.3 707 125 1 35 33 D/7343-31 T493D336M035(2)(3)(4)20 07016-153M(2)(3)(4) 11.6 6.0 0.2 866 125 1 35 47 X/7343-43 T493X476M035(2)(3)(4)10 07016-155M(1)(2)(3)(4) 16.5 6.0 0.25 812 125 1 35 47 E/7360-38 T493E476M035(2)(3)(4)10 07016-156M(1)(2)(3)(4) 16.5 6.0 0.20 1000 125 1 50 0.22 A/3216-18 T493A224M050(2)(3)(4)10 07016-158M(1)(2)(3)(4) 0.5 4.0 18.0 65 125 1 VDC at 85ºC µF KEMET/EIA (See page 2 for Ordering Information) (See page 2 for Ordering Information) µA at +25ºC Max/5 Min % at +25ºC Ω at+25ºC 100 kHz Max mA at +25°C 100 kHz ºC Reflow Temp ≤ 260ºC Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing 07016 Part Number DC Leakage DF Standard ESR Ripple Current STD ESR (rms) Maximum Operating Temp MSL (1) To complete KEMET/DLA part number, insert M for ± 20%, K for ± 10% or J for 5%. Designates Capacitance tolerance. (2) To complete KEMET/DLA part number, insert B (0.1%/1,000 Hours) or C (0.01%/1,000 Hours). Designates Reliability Level. (3) To complete KEMET/DLA part number, insert B = Gold-plated, C = Hot solder dipped, H = Solder-plated. Designates Termination Finish. (4) To complete KEMET/DLA part number, insert A = + 25ºC after Weibull, B = −55ºC and +85ºC after Weibull, C = −55ºC and + 85ºC before Weibull or Z or no option= No test required. Designates surge testing option.

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Recommended Voltage Derating Guidelines −55°C to 85°C 85°C to 125°C % Change in Working DC Voltage with Temperature VR 67% of VR Recommended Maximum Application Voltage 50% of VR 33% of VR Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. T he positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. T he negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 25°C T ≤ 85°C T ≤ 125°C 1.00 0.90 0.40 T= Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. KEMET Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts at 25°C w/+20°C Rise A 3216–18 75 B 3528–21 85 C 6032–28 110 D 7343–31 150 X 7343–43 165 E 7360–38 200 S 3216–12 60 T 3528–12 70 U 6032–15 90 V 7343–20 125 T510X 7343–43 270 T510E 7360–38 285 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) 20% 40% 60% 80% 100% 120% −55 25 85 125 % Working Voltage % Change in Working DC Voltage with Temperature Temperature (ºC) 67% 33% Recommended Maximum Application Voltage (As % of Rated Voltage)

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 15% of Rated voltage 85°C 5% of Rated voltage 125°C 1% of Rated voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. L S W W L Grid Placement Courtyard

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Soldering Process KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (T Smin) 100°C 150°C Temperature Maximum (T Smax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (T L to TP) 3°C/seconds maximum 3°C/seconds maximum Liquidous Temperature (T L) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 60 – 150 seconds Peak Temperature (T P) 220°C* 235°C** 250°C* 260°C** Time within 5°C of Maximum Peak Temperature (t P) 20 seconds maximum 30 seconds maximum Ramp-down Rate (T P to TL) 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. Time Temperature Tsmin Tsmax TL TP Maximum Ramp Up Rate = 3°C/second Maximum Ramp Down Rate = 6°C/second tP tL ts 25°C to Peak

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Construction Leadframe (− Cathode) Leadframe (+ Anode) Tantalum Wire Molded Epoxy Case Molded Epoxy Case Polarity Bevel (+) Weld (to attach wire) Silver Adhesive Washer Polarity Stripe (+) Detailed Cross Section Tantalum Wire Tantalum Ta2O5 Dielectric (First Layer) Carbon (Third Layer) Silver Paint (Fourth Layer) Washer MnO2 (Second Layer) Capacitor Marking * 302 = 2nd week of 2023 KEMET Military HRA Polarity Indicator (+) Rated Voltage Picofarad Code KEMET ID Date Code* Date Code * 1st digit = Last number of Year 0 = 2020 1 = 2021 2 = 2022 3 = 2023 4 = 2024 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Embossment 8 mm (0.315”) or 12 mm (0.472”) Embossed carrier Right hand orientation only (+) (−) Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) Table 3 – Packaging Quantity Case Code Tape Width (mm) 7" Reel* 13" Reel* KEMET EIA S 3216-12 8 2,500 10,000 T 3528-12 8 3,000 10,000 M 3528-15 8 2,500 8,000 U 6032-15 12 1,000 5,000 L 6032-19 12 1,000 3,000 W 7343-15 12 1,000 3,000 Z 7343-17 12 1,000 3,000 V 7343-20 12 1,000 3,000 A 3216-18 8 2,000 9,000 B 3528-21 8 2,000 8,000 C 6032-28 12 500 3,000 D 7343-31 12 500 2,500 Q 7343-12 12 1,000 3,000 Y 7343-40 12 500 2,000 X 7343-43 12 500 2,000 E/T428P 7360-38 12 500 2,000 H 7360-20 12 1,000 2,500 O 7360-43 12 250 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Figure 1 – Embossed (Plastic) Carrier Tape Dimensions T F W Center Lines of Cavity User Direction of Unreeling Cover Tape B1 is for tape feeder reference only, including draft concentric about B0. ØD1 ØD0 Embossment For cavity size, see Note 1, Table 4 (10 pitches cumulative tolerance on tape ±0.2 mm) Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 D1 Minimum Note 1 E1 P0 P2 R Reference Note 2 S1 Minimum Note 3 T Maximum T1 Maximum 8 mm 1.5 +0.10/−0.0 1.0 (0.039) 1.75 ±0.10 (0.069 ±0.004) 4.0 ±0.10 (0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) (1.181) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 E2 Minimum F P1 T2 Maximum W Maximum A0, B0 & K0 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 ±0.05 (0.138 ±0.002) 2.5 (0.098) 8.3 (0.327) Note 5 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 ±0.05 (0.217 ±0.002) 4.6 (0.181) 12.3 (0.484) 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defi ned by A0, B0 and K0 shall surround the component with suffi cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) Figure 5 – Reel Dimensions A D (See Note) Full Radius, See Note B (see Note) Access Hole at Slot Location (Ø 40 mm minimum) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth W3 (Includes flange distortion at outer edge) W2 (Measured at hub) W1 (Measured at hub) C (Arbor hole diameter) Note: Drive spokes optional; if used, dimensions B and D shall apply. N Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 20.2 (0.795)12 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 8 mm 50 (1.969) 8.4 +1.5/−0.0 14.4 (0.567) Shall accommodate tape width without interference12 mm 12.4 +2.0/−0.0 18.4 (0.724)

© KEMET Electronics Corporation • One East Broward Boulevard T2 007_T493 • 8/1/2023 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Tantalum Surface Mount Capacitors – High Reliability T493 High Reliability Alternative MnO 2 (CWR11 Style) KEMET Electronics Corporation Sales Offi ces For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial, automotive, and/or COTS grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation.